D-Link Router N 150 User Manual

17
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Sele\ft PPPoE (Username/Password) \brom the 
drop-down menu.
Sele\ft  Static  i\b  your  ISP  assigned  you  the  IP 
address, subnet mask, gateway, and DNS server 
addresses. In most \fases, sele\ft Dynamic.
Enter the IP address (Stati\f PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the 
password in the next box.
Enter the ISP Servi\fe Name (optional).
S ele\f t  either  Always- on, O n-Demand ,  or...

18
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Transmission  Unit  \bor  optimal  per\borman\fe  with 
your spe\fifi\f ISP (de\b\lault MTU is 1492).
The  de\bault  MAC  Address  is  set  to  the  Internet 
por t ’s  physi\fal  inter \ba\fe  MAC  address  on  the 
Broadband  Router.  It  is  not  re\fommended  that 
you  \fhange  the  de\bault  MAC  address  unless 
required by your ISP.  You \fan use the  Clone Your 
PC’s \fAC Address button to repla\fe the Internet 
port’s MAC address with...

19
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The  DNS  server  in\bormation  will  be  supplied  by 
your ISP (Internet Servi\fe Provider.)
Maximum Transmission  Unit  -  you  may  need  to 
\fhange  the  MTU  \bor  optimal  per\borman\fe  with 
your spe\fifi\f ISP. 1500 is the de\bau\llt MTU.
The  de\bault  MAC  Address  is  set  to  the  Internet 
port’s...

20
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Wireless Settings
I\b you want to manually \fonfigure the wireless settings 
on your router \fli\fk  \fanual Wireless Network Setup 
and re\ber to the next page.  

21
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Manual Wireless Network Setup
Che\fk the box to enable the wireless \bun\ftion. I\b 
you do not want to use wireless, un\fhe\fk the box 
to disable it. Cli\fk  Add New to \freate your own 
time s\fhedule to enable the wireless \bun\ftion. 
Servi\fe  Set  Identifier  (SSID)  is  the  name  o\b  your 
wireless network. Create a name using up to 32 
\fhara\fters. The SSID is \fase-sensitive.
Sele\ft one o\b the \bollowing:
02.11n  Only  -  Sele\f t...

22
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Enabling Hidden Mode is another way 
to se\fure your network. With this option 
enabled, no wireless \flients will be able to 
see your wireless network when they per\borm 
a s\fan to see what’s available.  In order \bor 
your wireless devi\fes to \fonne\ft to your 
router, you will need to manually enter the 
Wireless Network Name on ea\fh devi\f\le. 
Re\ber  to Section  4- Wireless  security  \bor  more 
in\bormation regarding wireless...

23
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
This se\ftion will allow you to \fhange the lo\fal n\letwork settings o\b the r\louter and to \fonfigure the DHCP setting\ls.
Network Settings
Enter the IP address o\b the router. The de\bault IP 
address is 192.168.0.1\l.
I\b  you  \fhange  the  IP  address,  on\fe  you  \fli\fk 
Sa\be Settings, you will need to enter the new 
IP address in your browser to get ba\fk into the 
\fonfiguration utility.
Enter the Subnet Mask. The de\bault subnet...

24
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Che\fk this box to enable the DHCP server on your 
router. Un\fhe\fk to disable this \bun\ftion.
Enter the starting and ending IP addresses \bor the 
DHCP server’s IP assignment.
N o te :  I \b   yo u   s t a t i \f a l l y   ( m a n u a l l y )   a s s i g n   I P 
addresses to your \fomputers or devi\fes, make sure 
the  IP  addresses  are  outside  o\b  this  range  or  you 
may have an IP \fonfli\ft. 
The length o\b time \bor the IP address...

25
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
DHCP \beservation
I\b you want a \fomputer or devi\fe to always have the same IP address assigned, you \fan \freate a DHCP reservation. The router 
will assign the IP address only to that \fomputer or devi\fe. 
Note: This IP address must be within \lthe DHCP IP Address Range.
Enter the \fomputer name or sele\ft \brom the drop-
down menu and \fli\fk 

26
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
The D-Link GO-RT-N150 \fan be \fonfigured as a virtual 
server so that remote users a\f\fessing Web or FTP servi\fes 
via the publi\f IP address \fan be automati\fally redire\fted 
to lo\fal servers in the LAN (Lo\fal Area Network). 
The  D-Link  GO-RT-N150  \birewall  \beature  \bilters  out 
unre\fognized  pa\fkets  to  prote\f t  your  LAN  so  all 
\fomputers  networked  with  the  router  are  invisible  to 
the  outside  world.  I\b  you...