Daewoo Dlp 32c1 Instruction Manual

							11
HDMI INPUT AV1 AV2
PC INPUT   AUDIOS-VHS
AV3 L - AUDIO - R
OPTICAL UP-GRADE PCRT
COMPONENTPr
RLPb Y
Antenna
Connection
Outdoor Antenna Connection
Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses.
Single Antenna Connection
VHF Antenna
UHF AntennaBack of the tv set
ANT/CABLE
Separate Antenna Connection.
ANT/CABLE
ANTENA combining Adapter
(Separate purchase) In case of coaxial cable
In case of feeder cable
VHF Antenna
UHF Antenna
 
						

							12
HDMI INPUT AV1 AV2
PC INPUT   AUDIOS-VHS
AV3 L - AUDIO - R
OP
Video
Connection
Connecting with an External Source
You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the 
AV3 input.
Note : If S-video and RCA jack are connected the same time, The TV set will only detect the S-Video mode.
•  If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended 
for better picture quality.
Connecting with SCART VIDEO
1. Prepare the scart lead for picture / sound.
2.  Connect the SCART input / output terminal of video with the SCART1(AV1), SCART2(AV2), input/output terminal of 
TV.
3. Turn on the video, Insert the video cassette, and press the “PLAY” button.
Note :
• SCART1 has CVBS/RGB input and RF output. It is used to connect a STB, VCR and DVD.
• SCART2 has CVBS input. It is used to connect a STB, VCR and DVD.
 
						

							13
Camcorder & Video
Game Connection
Watching the Camcorder Recording on TV
1. Prepare the S-video and RCA connector.
2. These connectors connect to S-video or AV 3 as shown in the picture below.
3. Turn on the TV set and camcorder/video game.
4. Select AV3/S-video mode, using the ”
”button of the Remote controller or “” button of the TV set.
Back of the tv set
Video gameCamcorder
Note : If S-video and RCA jack are connected at the same time, the TV set only detects the S-Video mode.
*  If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended 
for better picture quality.
 
						

							14
DVD Player
connection
When connecting with a component cable and Euro SCART cable
 Back of the tv set
DVD
Note :
•  When you connect with the component video, please check the colour of the cable between the DVD and TV set.
When connecting with a S-VHS cable and RCA cable
 
Note : If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
•  If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended 
for better picture quality.
Back of the tv set
DVD
 
						

							15
STB(Set Top Box)
Connection
When connecting with a HDMI cable
 
Back of the tv set
Set Top Box
When connecting with a component cable
 
Set Top Box Back of the tv set
 
						

							16
PC
Connection
When connecting with PC(D-Sub) cable.
1. First adjust resolution of the PC. (640 X 480, 800 X 600, 1024 X 768)
2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4.  Select PC mode by pressing “MULTIMEDIA” button on the remote control or ”
” button of the TV set.
Back of the tv set
PC
When connecting with a HDMI cable.
1. First adjust resolution of the PC. (640 X 480, 800 X 600, 1024 X 768)
2. Connect between PC and TV set using the HDMI and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. select DVI mode by pressing “MULTIMEDIA” button on the remote control or ”
” button of the TV set.
PCBack of the tv set
Note :  If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown in the pic-
ture upper.
 
						

							17
PC
Connection
PC CONNECTION NOTES:
1) The resolution of the TV set is best at 1024 768(XGA).
2) If there is a [ Vertial Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz.
3) If the PC resolution is too high, it may be hard to detect signals. Select a suitable resolution.
4) HDMI input port receives only digital Signal.
5)  Depending on the graphic card when you plug & unplug the HDMI connection the screen may not display correctly. 
Restart the computer if this happens.
Multi input resolution available in LCD TV.
Resolution V-freq HDMI PC(D-Sub) Component Standard
640 X 48060Hz o o x
72Hz o o x
75Hz o o x VESA Standard
800 X 60060Hz o o x VESA Standard
72Hz o o x VESA Standard
75Hz o o x
1024 X 76860Hz o o x VESA Standard
70Hz o o x VESA Standard
75Hz o o x VESA Standard
720 X 480 60Hz o x o
720 X 576 50Hz o o o
1280 X 72050Hz o x o
60Hz o o o
1920 X 1080i50Hz o x o
60Hz o o o
720 X 480i 60Hz x x o
720 X 576i 50Hz x x o
Note :
• 
When you connect with component, D-Sub, and HDMI, you must check the input resolution of external devices.
• 1280 X 720 mode is commonly used for Component.
• So if this mode is used at PC mode, the screen can be enlarged.
 
						

							18
Cable TV
Broadcasting
Connection
External Input Connection Source
Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a 
cable receiver. You may make the connection to any of the Component input and SCART input AV1, AV2.
Cable TV 
Broadcasting 
Station Input
CATV Receiver
Antenna Input Connection
Watching cable television is only possible after you have subscribed to the local broadcasting company and
installed a cable receiver.
Coaxial cable
Cable TV 
Broadcasting 
StationInput Output Coaxial cable
ANT/CABLE
CATV Receiver
 
						

							19
Connect with the
Dolby Digital AMP.
If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
Optical output
Dolby Digital AMP
L Woofer  Center  R
 Surround L Surround R
 
						

							20
Name of
Each Part
Front Panel (DLP-26C2 / DLP-32C2)
Buttons on the TV set have the same functions as those of the remote controller.
Control Key Buttons.
ƒ 
 Buttons :  Each time you press this button, the TV will cycle through: 
TV / AV1 / AV2 / AV3(S-Video) / PC/HDMI / COMPONENT.
„ MENU Button : Use this button to enter and exit the MENU.
… 
 Buttons : Use this buttons to change your TV’s volume or to move the cursor in the menu.
† 
 PR Buttons : Use this buttons to change channels on your TV or to move the cursor in the menu.
‡ Stand-by / TV ON button
 
 Button : Use this button to change from TV STAND-by mode to TV ON mode.
 
  :  Light up red in Stand-By mode and Lights up green in TV on mode. When TV is Child Lock 
mode, LED will cycle through red / green in Stand-By mode.
ˆ Remote controller signal receiver
  The screen contains the remote controller signal receiving window; therefore, point the remote controller towards 
the screen when using it.