Home > Daewoo > Washing Machine > Daewoo Dwd F1013 Instruction Manual

Daewoo Dwd F1013 Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Daewoo Dwd F1013 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							INSTRUCTION MANUAL
    DWD-F1011/1012/1013’S/F1211/1212/1213’S
    Washing Machine Instruction Manual
    CONTENTSPage
    A NOTE TO YOU
    Thank you for buying a DAEWOO appliance.
    DAEWOO washers are easy to use, save time, and help you manage your home better.
    This manual contains valuable information about how to operate and maintain your washer property and safely.
    Please read it carefully.
    QEconomic wash system
    Using artificial intelligence, the washer uses minimum energy and water by
    selecting optimal water lever and washing time.
    QLow noise system
    The washer minimizes the washing and spinning noises by sensing the amount
    of laundry.
    QChild-Lock
    The Child-Lock system has been used to prevent children from pressing any
    button to change the program during operation.
    QNano-silver sterilization washing(Option)
    By applying very fine silver particles on essential parts inside, the washer
    sterilizes up to 99.9% as is done by boiling wash.
    QAir bubble washing(Option)
    This is an advanced technology that generates millions of air bubbles inside the drum on washing sequence,
    and the bubbles dissolve the detergent particles completely and cleanse all the soil in clothes gently and neatly.
    PARTS AND FEATURES .................................................................................................................2
    WASHER SAFETY ...........................................................................................................................3
    INSTALLATION INSTRUCTIONS ....................................................................................................4
    INLET HOSE CONNECTION ...........................................................................................................5
    ELECTRICAL REQUIREMENTS .....................................................................................................6
    OPERATING YOUR WASHER ........................................................................................................7
    THE FUNCTIONS OF THE CONTROL PANEL ...............................................................................9
    WASHING PROCEDURE AND PROGRAM SELECTION .............................................................10
    MAINTENANCE .............................................................................................................................19
    HOW TO CLEAN THE FILTER ......................................................................................................20
    REMOVING STAINS ......................................................................................................................21
    TROUBLE SHOOTING ..................................................................................................................22
    SPECIFICATION ............................................................................................................................23
     
    						
    							2
    PARTS AND FEATURES
    The parts and features of your washer are illustrated on the page.
    Become familiar with all parts and features before using your washer.
    Accessories
    NOTE
    The drawings in the book may vary from your washer model.
    They are designed to show the different features of all models coverd by this book,
    Your model may not include all features.
    Hose drain Inlet hose Spanner Manual Cap holder(3EA)
    ADJUSTABLE LEG
    CONTROL PANEL
    DOOR
    DETERGENT CASE
    INLET HOSE
    LOWER COVER
    POWER CORD
    HOSE DRAIN
     
    						
    							3
    Save these instructions
    Your safety is important to us.
    To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the
    following basic precautions.
    Understanding your responsibilities
    • Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same
    wash. Hazardous fumes can form.
    • Unplug power supply cord before attempting to service your washer.
    • Do not wash fiberglass material.
    Small particles can stick to fabrics washed in following loads and cause skin irritation.
    • Do not spray water on the control panel of the washer.
    It could cause fire or an electric shock.
    • In case of the dual valve model, if you connect only cold water inlet valve, while water
    temperature is selected as hot or warm, there can be water leakage from unconnected water
    inlet valve.
    • This appliance must be grounded. 
    To avoide electrical shock, use a metal pipe for the ground connection.
    • Flammable fluids (dry-cleaning solvents,
    kerosene, gasoline, etc.) should not be used
    or stored in or near your washer.
    Do not add flammable fluids to your wash
    water.These substances give off vapors that
    can create a fire hazard or explosion.
    • After starting a cycle, do not reach into the
    washer until all motions stop.
    • Do not tamper with the controls.
    • The appliance is not intended for use by
    young children or infirm persons without
    supervision.
    • If the supply cord is damaged, it must be
    replaced by the manufacturer, or its service
    agent or a similarly qualified person in order
    to avoid a hazard.
    • If the appliance is supplied from a cord
    extension set or electrical portable outlet
    device it should be positioned so that it is not
    subjected to splashing or ingress of
    moisture.Please ...
    • Have only a qualified person install, repair, 
    or replace parts on washer.
    • Maintain washer properly.
    • Protect washer from the weather and keep
    it where the temperature will not fall below
    freezing.
    • Do not install the washer at a place of
    extremely high humidity. It could cause an
    electric shock or a short circuit.
    • Connect washer to the correct outlet,
    electrical supply, water supply, and drain
    supply.
    WASHER SAFETY
    Read all instructions before using your washer
     
    						
    							4
    Removing transit bolts
    1. Before operating the washer, remove the
    transit bolts(3ea) along with the rubber.
    • If the bolts are not removed, it may cause
    heavy vibration, noise and malfunction.2. Unscrew the 3 bolts with the spanner
    supplied. Keep the 3 bolts and spanner for
    future use.
    • Whenever the appliance is transported, the
    transit bolts must be refitted.
    3. Close the holes with the cap holders supplied.
    Location of washer
    • Check location where the washer will be installed. Make sure you have everything necessary for
    correct installation.
    • Do not place or store your washer below 0°C (32°F) to
    avoid any damage from freezing.
    • Do not place or store laundry products on top of washer
    at any times.
    • Install the washer on the horizontal solid floor.
    If the washer is installed on an unsuitable floor, it could
    make considerable noise, vibrate severely and cause a
    malfunction. If the washer is not level, adjust leg up or
    down for horizontal installation.
    • Leave some space (right & left : 2cm, rear : 10cm).
    INSTALLATION INSTRUCTIONS
    Laundry
    Tub Washer
    approx.
    2cmDrain Hose
     
    						
    							5
    In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the
    cold water inlet valve.
    Option : Be careful not to confuse hot water inlet and cold water inlet.
    For Ordinary Tap
    For Screw-Shaped Tap
    INLET HOSE CONNECTION
    1Pull down the collar of the
    inlet hose to separate it
    from the water tap
    adapter.2Loosen the four screws
    properly in order to fit into
    water tap.3Fit the water tap adapter
    into the water tap and
    tighten the four screws
    evenly while pushing up
    the adapter so that the
    rubber packing can stick
    to the water tap tightly.
    4Remove the tape, and
    screw connector B into
    connect A tightly.5Connect the inlet hose to
    the water tap adapter by
    pulling down the collar of
    the hose end.6Connect the inlet hose
    adapter of the hose to the
    water inlet of the washer
    by turning it clockwise to
    be fixed tightly.
    • Please check the rubber
    packing present inside the inlet
    hose adapter of the hose.
    1Connect the inlet hose to
    the water tap by screwing
    the connector tightly.2Connect the connector-
    inlet supplied if necessary.3Connect the inlet hose
    adapter to the water inlet
    of a washer and turn it to
    be fixed.
    *Check the packing in the inlet
    TAPE
    Connector B Connector A
    Connector
    Connector
    Rubber
    Packing
    Hose
    ConnectorRubber
    Packing
    Hose
    Connector
    inlet
    Connector
     
    						
    							6
    ELECTRICAL REQUIREMENTS
    • Electrical earth is required on this washer
    • If it does not fit the outlet, have a proper outlet
    installed by a qualified electrician.• Don’t earth to a gas pipe.
    • Don’t change the power supply cord plug.
    • Check with a qualified electrician if you are not
    sure the washer is properly earthed.
    WARNING
    Recommended earthing method Electrical shock hazard : Failure to follow these instructions could result in
    death or serious injury.
    For your personal safety, this washer must be earthed.
    This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’.
    To minimize possible shock hazard, the cord must be plugged into a mating
    earthing-type wall receptacle ‘C’. If a mating wall receptacle is not available,
    it is the personal responsibility and obligation of the customer to have the
    proper earthed wall receptacle installed by a qualified electrician.C
    B
    A
    Drain system
    • Never forget to install drain hose before operating your washer.
    • Open the packing box, and there is a drain hose inside the drum.
    • Connect the drain hose to the drain outlet at the back side of the washer.
    • 
    Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer.
    • When installing the drain hose to tub(sink), secure it tightly with a string.
    • Proper securing of the drain hose will protect the floor from damage due to water leakage.
    • When the drain hose is too long,  do not force it back into the washer.
    This will cause abnormal noise.
    Level adjustment
    1If the washer is installed on an
    unsuitable floor, it could make
    considerable noise, vibrate and
    cause a malfunction.
     
     
    						
    							7
    OPERATING YOUR WASHER
    2Adjust the level of washer using adjustable legs.
    • Please check if there is any gap between the
    four adjustable legs and the floor.
    • Turning adjustable legs by the enclosed
    spanner, adjust the level of washer and make
    it sure that there is no swaying of washer.
    • After the adjustment is finished, turn the fixing
    nuts up tightly so that the washer maintains
    the adjustment.
    3Make it sure that the washer does not sway when you press
    down the four corners of the washers top plate.
    adjustable legFixing Nut
    NOTE
    There should be no swaying of washer and all the
    adjustable legs should stick to the floor closely.
    To obtain the best washing results, you must operate your washer properly.
    This section gives you this important information.
    • Close zippers, snaps, and hooks to avoid
    snagging other items.
    Remove pin, buckles, and other hard
    objects to avoid scratching the washer
    interior.
    • Empty pockets and pull them inside out.• Turn down cuffs and turn synthetic knits
    inside out to avoid pilling.
    • Tie strings and sashes to avoid tangling.
    • Treat spots and stains.
    (See “Removing stains” on page 21) Preparing clothes for washing
     
    						
    							8
    • Drop items into washer loosely. Items
    should move easily through wash water for
    best cleaning and wrinkle-free results.
    • Load washer properly and select correct
    load size setting.
    Overloading and selecting a setting too
    small for the wash load can :
    - Cause poor cleaning
    - Increase wrinkling
    - Create excessive lint
    - Wear out items faster (because of pilling)• Mix large and small items in each load. Load
    evenly to maintain washer balance.
    An unbalanced load can make the washer
    vibrate during spin.
    • Reduce wash time when using a small load
    size setting. Load with only a few small
    items needs less wash time.
    • Use a large load size setting to reduce
    wrinkling with permanent press clothes and
    some synthetic knits. These items should
    have more room to move in the water than
    heavy items. (towels, jeans) Loading
    1Detergent case2Adding fabric softener
    • If desired, add measured liquid fabric
    softener to the softener inlet.
    • Pour liquid fabric softener into the
    dispenser using the amount
    recommended on the package.
    • Do not exceed the maximum fill line.
    Overfilling can cause early dispensing of the
    fabric softener which could stain clothes.
    • Do not open the detergent case when
    water is supplied.
    • Avoid pouring fabric softener directly on
    the clothes. Adding detergent
    • Separate heavily soiled items from lightly soiled ones, even if they would normally be washed
    together.
    • Separate dark colors from light colors, colorfast items from non-colorfast item.Sorting
    Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
    Color (White, Lignts, Darks) Separate white clothes from colored clothes.
    Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.
    Main washPre wash
    Fabric softener
     
    						
    							9
    Press this switch to turn the power on or off.
    Operation and temporary stop is repeated as it is pressed.
    When you want to change program in operating;
    press the “Start/Hold” button ªSelect the program that you want to change ªpress the
    “Start/Hold” button again.
    You can select the course you want, and each lamp is turned on when that course is selected.
    For the more detailed information, please refer to the page 11~18.
    It can be used to adjust temperature of water according to types of the load to be washed.
    As the button is pressed, temperature of water is selected by 
    Cold ª30˚C ª40˚C ª60˚C ª95˚C
    By pressing the spin button, the spin speed can be chosen.
    Rinse Hold• 
    Is selected by pressing the spin button repeatedly. This function leaves clothes
    in the machine; suspended in the water after a rinse without entering into spin.
    • To proceed through to a drain or spin, after the Rinse Hold function is
    completed, use spin button.
    No spin• If no spin is selected, the washer stops after draining water.
    Crease Care• If you want to prevent crease, select this button with spin speed.
    Rinse+• Is used to add a rinse, which may assist in removing traces of detergent residue.
    • By selecting Rinse+ function, the rinse time and the rinse water are increased.
    Pre-Wash• The washer operates one additional wash and spin before the main wash.
    • If the laundry is heavily soiled, Pre-Wash course is effective.
    • Pre-Wash is available in Cotton and Synthetic programs.
    All courses have pre-set washing times, but Time Save decreases it to 10 minutes.
    Each time this button is pressed the watch icon is repeated on and off. When it is on, the Time
    Save function is set. Time Save is available in Cotton, Eco and Synthetic programs.
    It can be used to pre-engage time for wash.
    Use this function when you want to protect any accident occurring from handling of washer by a child.
    During an operation of washer, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously.
    In Child Lock mode, no button functions except Power button.
    In Child Lock mode, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously like setting Child
    Lock and Child Lock is cancelled. 
    To change to the desirde program, while in Child Lock mode;
    1. Press both the Time save and Time delay buttons together once again.
    2. Press the Start/Hold button.
    3. Select the desired program and press the Start/Pause button again.
    THE FUNCTIONS OF THE CONTROL PANEL
    DWD-F1011
    WD-F1011 WASHING MA
    ASHING MACHINE
    CHINE
    * The child lock can be set at any time and it is automatically cancelled when operational errors
    occur. Also Child Lock works also when power is off.
    Change
    the desired
    program
     
    						
    							10
    1. COTTON IS AUTOMATICALLY SELECTED UPON POWER ON
    • Press the Power button to start.
    • Press the Start/Hold button
    • Initial condition
    - Program : Cotton
    - Wash : main wash
    - Rinse : 3 times
    - Spin : 800 rpm
    - Water temperature : 40˚C
    WASHING PROCEDURE AND PROGRAM SELECTION
    2. MANUAL SELECTING
    • Press the Power button to start
    • Select the conditions which you want to use by turning the program dial and pressing each button.
    • Press the Start/Hold button.
    3. RESERVED WASHING
    • Reservation can be made from 2 hours to 12 hours.
    example) To make reservation to complete washing in 8 hours.
    - Procedure to press the button.
    * Each pressing of the button advances time delay by one hour.
    • Now the reservation is made.
    • If you want to check the selected program, press the “Start/Hold” button again.
    • Preparing washing before starting “Time Delay”;
    - Turn on the water tap
    - Load laundry and close the door
    - Place the detergent and fabric softener in the detergent case.
    • To cancel the time delay, press the Power button.
    ajust to 8 select the 
    program
    or manual
     
    						
    All Daewoo manuals Comments (0)

    Related Manuals for Daewoo Dwd F1013 Instruction Manual