Daewoo Dwd Ld1412 Instruction Manual

							E-11
The functions of the control panel (cont.)
*  
The Child Lock will be cancelled when power is off. 
Steam(option )
Wa ter +(option )
Steam(option )
Wa ter +(option )
Option
Option
Low TempIronCupboard Very Time
■ DWD-LD141X
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
Press this switch to turn the power on or off.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the “Start/Pause” button → Select the program that you want to change → 
press the “Start/Pause” button again.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
You can select the course you want, and each lamp is turned on when that course 
is selected.
For the more detailed information, please refer to the page 14~21.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
It can be used to adjust temperature of water according to types of the load to be 
washed.
As the button is pressed, temperature of water is selected by 
Cold → 30°C → 40°C → 60°C → 95°C
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
By pressing the spin button, the spin speed can be chosen.
If press "spin button" spin RPM change.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
You can select the course you want, and each lamp is turned on when that course 
is selected.
As the button is pressed, the wash course is selected by
Wash → Soak → Pre-Wash
OptionYou can select the rinse+spin condition yon want and each lamp is turned on when 
that course is selected.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
It can be used to pre-engage time for wash.
Steam(option)
Water +(option)• Steam - During washing time Steam is sprayed in Drum. Laundry is more clean.
• Water + - If you want to use more water, press this button.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
Use to memory program you want.
Steam(option )
Wa ter +(option )
Steam(option
)
Wa ter +(option )
Option OptionLow TempIronCupboard Very Time
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased. 
 
						

							E-12
Washing procedure and program selection
1. Cotton  is automatically selected upon power on
  • Press the Power button to start.    
  • Press the Start/Hold button     
  • Initial condition     
      - Program : Cotton
      - Wash : main wash
      - Rinse : 3 times
      - Spin : 800
      - Water temperature : 40°C     
2. MANUAL SELECTING
  • Press the Power button to start
  • Select the conditions which you want to use by turning the program dial and pressing each button.  • Press the 
Start/Pause button.
3. Reserved washing
  • Reservation can be made from 1 hour to 12 hours.         
        example)  To make reservation to complete washing in 8 hours.         
       - Procedure to press the button.
       * Each pressing of the button advances time delay by one hour.
  • Now the reservation is made.
  • If you want to check the selected program, press the “Start/Pause” button again.
  • Preparing washing before starting “Time Delay”;
       - Turn on the water tap
       - Load laundry and close the door
       - Place the detergent and fabric softener in the detergent case.
  • To cancel the time delay, press the Power button.
select the
program
or manual
select the
program
or manual
 
						

							E-13
Washing procedure and program selection (cont.)
ProgramFabric
Type
Proper
Temp.OptionMaximum
Load
Cotton/Normal
First check if laundry is machine 
washable.(white cotton, linen 
towel and sheets..)
60°C
(Cold, 30°C, 
40°C, 95°C)
Pre Wash
Rinse+Rating
Colorfast garments
(shirts, night dresses, pajamas..)
and lightly soiled white cottons
(underwear..)
40°C
(Cold, 30°C, 
60°C)
Pre Wash
Rinse+Rating
SyntheticPolyamide, Acrylic, Polyester30°C
(Cold, 40°C)
Pre Wash
Rinse+
Less than
3kg
Delicate/
Handwash
Delicate laundry easily
damaged
(silk, curtains..)
ColdLess than
3kg
Intensive
Heavy soiled clothes
(blue-jean, climbing clothes, 
ruck sack, sports wear,..)
60°C
(Cold, 30°C, 
40°C, 95°C)
Pre Wash
Rinse+
Refer to
rating label
Quick 20Colored laundry which
is lightly soiled fast.ColdLess than
3kg
Sports Wearlightly soiled fast
and thin laundry
Cold
(Cold, 30°C, 
40°C)
Pre Wash
Rinse+
Tub CleanUse to clean 
(and dry for dry model)Colddry for only
Dry modelwithout load.
DrainDrain water in drum to outside
 • Pre Wash :  If the laundry is heavily soiled, “Pre Wash” program is recommended.        
Pre Wash is available in Cotton and Synthetic programs.
 • Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
4. FUNCTION
    • Recommended programs according to the laundry type
 
						

							E-14
Washing procedure and program selection (cont.)
NOTE  
 •  
If you want to change the setting during operation, press the Start/Pause button to hold the operation and press 
the button you want.
 •  
‘Cold’, ‘30’ °C, ‘40’ °C, ‘60’ °C and ‘95’ °C washing temperatures are selectable with Cotton/normal program.
 • ‘Prewash’, ‘Rinse+’ wash options are selectable with Cotton/normal program.
CAUTION 
 •  
If you select washing temperature ‘95’ °C, some cold water is supplied before the drain of main wash.    
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead 
of directly draining it. Therefore this is not a malfuction.
   (Be careful with the draining water, since it can be still hot although the temperature is lowered.)
1
Put the laundry in to the drum. Put detergent and softener into the detergent case. 
Then close the door.
 •  
Put detergent into the main wash and prewash compartments in the detergent case. 
Softener should be below the ‘MAX’ level.
 • Put detergent into the pre wash compartment only if you want to add prewash.
 •  
When you want to use bleach, put it into the main wash compartment with 
detergent.
2Press the Power button.
 •  
The LED shows only ‘---’ and all Program Lights turn on.
3
Select the ‘Cotton/normal’ program using program selection dial.
 •  
If you press Start/Hold button after power button without selecting program, the 
‘Cotton/normal’ program is selected as default program.
 •  
Washing temperature ‘40’ °C, spin ‘800’ rpm are selected automatically.
 •  
If you want to change washing temperature, the spin velocity or add wash options 
(Rinse+, Pre-Wash), press each button.
4
Press Start/Pause button.
 •  
The Door is locked. By sensing the weight of laundry and supplying wash water,    
The appliance starts washing.
* COTTON/NORMAL PROGRAM
 
						

							E-15
Washing procedure and program selection (cont.)
NOTE  
 •  
If you want to change the setting during operation, press the Start/Pause button to hold the operation and press 
the button you want.
 • Only ‘Cold’, ‘30’ °C, ‘40’ °C washing temperatures are selectable with Synthetic program.
 • ‘Prewash’, ‘Rinse+’ wash options are selectable with Synthetic program.
 • The appropriate amount of laundry for Synthetic program is below 3kg.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.      
Then close the door.
 •  
Put detergent into the main wash and prewash compartments in the detergent case. 
Softener should be below the ‘MAX’ level.
 • Put detergent into the pre wash compartment only if you want to add prewash.
 •  
When you want to use bleach, put it into the main wash compartment with 
detergent.
2Press the Power button.
 •  
The LED shows only ‘---’ and all Program Lights turn on.
3
Select the ‘Synthetic’ program using program selection dial.
 •  
Washing temperature ‘30’ °C, spin ‘800’ rpm are selected automatically.
 •  
If you want to change washing temperature, the spin velocity or add wash options 
(Prewash, Rinse+), press each button.
4
Press Start/Pause button.
 •  
The Door is locked. By sensing the weight of laundry and supplying wash water,    
The appliance starts washing.
* SYNTHETIC PROGRAM
 
						

							E-16
Washing procedure and program selection (cont.)
NOTE  
 •  
All programs are not selectable. 
 • The appropriate amount of laundry for Delicate program is below 3kg.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.        
Then close the door.
 •  
Put detergent into the main wash compartments in the detergent case.              
Softener should be below the ‘MAX’ level.
 •  
When you want to use bleach, put it into the main wash compartment with 
detergent.
2Press the Power button.
 •  
The LED shows only ‘---’ and all Program Lights turn on.
3Select the ‘Delicate / Handwash’ program using program selection dial.
 •  
Washing temperature ‘Cold’, spin ‘400’ rpm are selected automatically.
4
Press Start/Pause button.
 •  
The Door is locked. By sensing the weight of laundry and supplying wash water,    
The appliance starts washing.
* DELICATE / HANDWASH PROGRAM
 
						

							E-17
Washing procedure and program selection (cont.)
NOTE  
 •  
If you want to change the setting during operation, press the Start/Pause button to hold the operation and press 
the button you want.
 • All washing temperatures are selectable with Intensive program.
 • ‘Prewash’, ‘Rinse+’ wash options are selectable with Intensive program.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.      
Then close the door.
 •  
Put detergent into the main wash and prewash compartments in the detergent case. 
Softener should be below the ‘MAX’ level.
 • Put detergent into the pre wash compartment only if you want to add prewash.
 •  
When you want to use bleach, put it into the main wash compartment with 
detergent.
2Press the Power button.
 •  
The LED shows only ‘---’ and all Program Lights turn on.
3
Select the ‘Intensive’ program using program selection dial.
 •  
Washing temperature ‘60’ °C, spin ‘1000’ rpm are selected automatically.
 •  
If you want to change washing temperature, the spin velocity or add wash options 
(Prewash, Rinse+), press each button.
4
Press Start/Pause button.
 •  
The Door is locked. By sensing the weight of laundry and supplying wash water,    
The appliance starts washing.
* INTENSIVE PROGRAM
 
						

							E-18
Washing procedure and program selection (cont.)
NOTE  
 • All programs are not selectable with Quick 20 program. 
 • The appropriate amount of laundry for Quick 20 program is below 3kg.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.       
Then close the door.
 •  
Put detergent into the main wash compartments in the detergent case. Softener 
should be below the ‘MAX’ level.
 •  
When you want to use bleach, put it into the main wash compartment with 
detergent.
2Press the Power button.
 •  
The LED shows only ‘---’ and all Program Lights turn on.
3Select the ‘Quick’ program using program selection dial.
 •  
Washing temperature ‘Cold’, spin ‘800’ rpm are selected automatically.
4
Press Start/Pause button.
 •  
The Door is locked. By sensing the weight of laundry and supplying wash water,     
The appliance starts washing.
* QUICK 20
 
						

							E-19
Washing procedure and program selection (cont.)
NOTE  
 •  
If you want to change the setting during operation, press the Start/Pause button to hold the operation and press 
the button you want.
 •  
Only 'Cold', '30'°C and  '40'°C washing temperatures are selectable with Sports Wear program.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.       
Then close the door.
 •  
Put detergent into the main wash and prewash compartments in the detergent case. 
Softener should be below the ‘MAX’ level.
 •  
Put detergent into the pre wash compartment only if you want to add prewash.
 •  
When you want to use bleach, put it into the main wash compartment with 
detergent.
2Press the Power button.
 •  
The LED shows only ‘---’ and all Program Lights turn on.
3Select ‘Sports Wear’ program using program selection dial.
 •  
Washing temperature ‘Cold’, spin ‘800’ rpm are selected automatically.
4
Press Start/Pause button.
 •  
The Door is locked. By sensing the weight of laundry and supplying wash water,     
The appliance starts washing.
* SPORTS WEAR PROGRAM
 
						

							E-20
Washing procedure and program selection (cont.)
NOTE  
 •  
All programs are not selectable.
 • Use this program WITHOUT load.
 • The appropriate cleaning time is one time per a month.
1Press the Power button.
•  
The LED shows only ‘---’ signal.
2Select the ‘Tub Clean’ program using program selection dial.
• ‘Soak’ and spin ‘400’ rpm and ‘Cold’ water temperature.
3Press Start/Pause button.
 •   
The washer will be operated with locking Door and supplying water.
* TUB CLEAN PROGRAM