Home > Daewoo > Washing Machine > Daewoo Dwdf1011 Instruction Manual

Daewoo Dwdf1011 Instruction Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Daewoo Dwdf1011 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    4. FUNCTION
    • Recommended programs according to the laundry type
    • Pre Wash : If the laundry is heavily soiled, “Pre Wash” program is recommended.
    Pre Wash is available in Cotton and Synthetic programs.
    • Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
    • Eco : By selecting Eco function, the water temperature is lowered and washing time is increased. 
    So you can economize your consumption of heating energy.
    Fabirc
    Type
    First check if laundry is machine
    washable.(white cotton, linen
    towel and sheets..)
    Colorfast garments
    (shirts, night dresses, pajamas..)
    and lightly soiled white cottons
    (underwear..)60˚C
    (95˚C)Pre Wash
    Rinse+
    Crease CareRating
    40˚C
    (60˚C, 30˚C)Pre Wash
    Rinse+
    Crease CareRating
    Laundry type is the same as
    Cotton.60˚CPre Wash
    Rinse+
    Crease CareRating Proper
    Temp.OptionMaximum
    Load Program
    Cotton
    Eco
    Polyamide, Acrylic, Polyester40˚C
    (60˚C, 30˚C)Pre Wash
    Rinse+
    Crease CareLess than
    1.5kg Synthetic
    Delicate laundry easily
    damaged
    (silk, curtains..)ColdRinse+
    Crease CareLess than
    1.0kg Delicate
    Machine washable woolens
    with pure new wool only.ColdRinse+
    Crease CareLess than
    1.0kg Wool
    “Hand wash” marked delicate
    and wool laundryCold
    (30˚C)Rinse+
    Crease CareLess than
    1.0kg Hand Wash
    Colored laundry which
    is lightly soiled fast.30˚C
    (Cold, 40˚C)Rinse+
    Crease CareLess than
    1.0kg Quick
     
    						
    							12
    * COTTON PROGRAM
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • ‘30’, ‘40’, ‘60’ and ‘95’ ˚C washing temperatures are selectable with Cotton program.
    • ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Cotton program.
    Caution!
    • If you select washing temperature ‘95’ ˚C, some cold water is supplied before the drain of main wash. This
    is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead
    of directly draining it. Therefore this is not a malfuction.
    (Be careful with the draining water, since it can be still hot although the temperature is lowered.)
    Put the laundry in to the drum. Put detergent and softener into the detergent case.
    Then close the door.
    • Put detergent into the main wash and prewash compartments in the detergent case.
    Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with detergent. 1
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 2
    Select the ‘Cotton’ program using program selection dial.
    • If you press Start/Hold button after power button without selecting program, the
    ‘Cotton’ program is selected as default program.
    • Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected
    automatically.
    • If you want to change washing temperature, the spin velocity or add wash options
    (Rinse+, Crease Care), press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							13
    * ECO PROGRAM
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • Only ‘60’ ˚C washing temperature is selectable with Eco program.
    • Only ‘Rinse+’ and ‘Crease Care’ of all wash options are selectable with Eco program.
    Put the laundry in the drum. Put detergent and softener into the detergent case. Then
    close the door.
    • Put detergent into the main wash and prewash compartments in the detergent
    case. Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with
    detergent.
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 1
    2
    Select the ‘Eco’ program using program selection dial.
    • Washing temperature ‘60’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected
    automatically.
    • If you want to change the spin velocity or add wash options (Rinse+, Crease Care),
    press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							14
    * SYNTHETIC PROGRAM
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • Only ‘30’, ‘40’ and ‘60’ ˚C washing temperatures are selectable with Synthetic program.
    • ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Synthetic program.
    • The appropriate amount of laundry for Synthetic program is below 1.5kg.
    Put the laundry in the drum. Put detergent and softener into the detergent case. Then
    close the door.
    • Put detergent into the main wash and prewash compartments in the detergent
    case. Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with
    detergent.
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 1
    2
    Select the ‘Synthetic’ program using program selection dial.
    • Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected
    automatically.
    • If you want to change washing temperature, the spin velocity or add wash options
    (Prewash, Rinse+, Crease Care), press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							15
    * DELICATE PROGRAM
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • Only ‘cold’ of washing temperature is selectable with Delicate program.
    • ‘1000’ rpm of spin velocity is NOT selectable with Delicate program.
    • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Delicate program.
    • The appropriate amount of laundry for Delicate program is below 1.0kg.
    Put the laundry in the drum. Put detergent and softener into the detergent case. Then
    close the door.
    • Put detergent into the main wash and prewash compartments in the detergent
    case. Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with
    detergent.
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 1
    2
    Select the ‘Delicate’ program using program selection dial.
    • Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected
    automatically.
    • If you want to change the spin velocity or add wash options (Rinse+, Crease Care),
    press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							16
    * WOOL PROGRAM
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • Only ‘Cold’ washing temperature is selectable with Wool program.
    • ‘1000’ rpm of spin velocity is NOT selectable with Hand program in order to protect damage on laundry.
    • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Wool program.
    • The appropriate amount of laundry for Wool program is below 1.0kg.
    • Use only special detergent for wool.
    (Since special neutral detergent for wool creates a lot of bubbles, use appropriate amount).
    Put the laundry in the drum. Put detergent and softener into the detergent case. Then
    close the door.
    • Put detergent into the main wash and prewash compartments in the detergent
    case. Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with
    detergent.
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 1
    2
    Select the ‘Wool’ program using program selection dial.
    • Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected
    automatically.
    • If you want to change the spin velocity or add wash options (Rinse+, Crease Care),
    press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							17
    * HAND WASH
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • Only ‘Cold’ and ‘30’ ˚C washing temperatures are selectable with Hand Wash program.
    • ‘1000’ rpm of spin velocity is NOT selectable with Hand program.
    • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Hand Wash program.
    • Use Hand Wash program for the laundry that is marked ‘Hand wash’ in the care label.
    Put the laundry in the drum. Put detergent and softener into the detergent case. Then
    close the door.
    • Put detergent into the main wash and prewash compartments in the detergent
    case. Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with
    detergent.
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 1
    2
    Select the ‘Hand Wash’ program using program selection dial.
    • Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘3’ times are selected
    automatically.
    • If you want to change the washing temperature, spin velocity or add wash options
    (Rinse+, Crease Care), press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							18
    * QUICK 30
    Note
    • If you want to change the setting during operation, press the Start/Hold button to hold the operation and
    press the button you want.
    • Only ‘Cold’, ‘30’ ˚C and ‘40’ ˚C washing temperatures are selectable with Quick 30 program.
    • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Quick 30 program.
    Put the laundry in the drum. Put detergent and softener into the detergent case. Then
    close the door.
    • Put detergent into the main wash and prewash compartments in the detergent
    case. Softener should be below the ‘MAX’ level.
    • Put detergent into the pre wash compartment only if you want to add prewash.
    • When you want to use bleach, put it into the main wash compartment with
    detergent.
    Press the Power button.
    • The LED shows only ‘---’ and all Program Lights turn on. 1
    2
    Select the ‘Quick’ program using program selection dial.
    • Washing temperature ‘30’ ˚C, spin ‘800’ rpm and rinse ‘2’ times are selected
    automatically.
    • If you want to change the washing temperature, spin velocity or add wash options
    (Rinse+, Crease Care), press each button. 3
    Press Start/Hold button.
    • The Door is locked. By sensing the weight of laundry and supplying wash water,
    The appliance starts washing. 4
     
    						
    							19
    MAINTENANCE
    Proper care of your washer can extend its life. This section explains how to care for your washer
    properly and safely.
    Cleaning your washer
    Winter storage or moving care
    Install and store your washer where it will not freeze. Because some water may stay in the
    hoses, freezing can damage your washer.
    If you store or move your washer during freezing weather, winterize it.
    Non-use or vacation care
    Operate your washer only when you are at home.
    If you are on vacation or don’t use your washer for an extended period of time, you should:
    • Unplug the power supply cord or turn off eletrical power to the washer.
    • Turn off the water supplier to the washer.
    This helps avoid accidental flooding (due to a water pressure surge) while you are away.
    Wipe up detergent, bleach, and other spills with
    a soft, damp cloth or sponge as they occur.
    Occasionally wipe the outside of the washer to
    keep its looking like new one.Clean interior with 250ml of chlorine bleach
    mixed with 500ml of detergent.
    Run washer through a complete cycle.
    Repeat this process if necessary. Exterior Interior
    • Turn off water faucet.
    • Disconnect and drain water inlet hoses.
    • Run washer on a drain and spin setting (see
    page 10) for 1 minute.
    • Unplug the power supply cord.• Flush water pipes and hoses.
    • Reconnect water inlet hoses.
    • Turn on water faucet.
    • Reconnect power supply cord. To winterize washer To use washer again
    Do not put sharp or metal object in your washer, or they
    can damage the finish. Check all pockets for pins, clips,
    money, bolts, nuts, etc.
    Do not lay these objects in your washer after emptying
    pockets.
     
    						
    							20
    HOW TO CLEAN THE FILTER
    Cleaning the water inlet filter
    • Clean the filter when water leaks from the water inlet.
    Cleaning the drain filter
    • This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc..
    • If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be
    caused.
    CAUTION: Be careful when draining if the water is hot.
    Cleaning the detergent case
    *After a while detergent and fabric softeners leave a deposit in the case;
    - It should be cleaned from time to time with a jet of running water.
    - If necessary it can be removed completely from the machine by pressing the catch downwards
    and by pulling it out.
    - To facilitate cleaning, the upper part of the fabric softener compartment can be removed.
    *Detergent can also accumulate inside the recess which should be
    cleaned occasionally with a brush.
    *Once you have finished cleaning, replace the case and run a rinse
    cycle without laundry.
    1Pull the power
    plug out before
    cleaning it.2Turn off the water
    supply to the
    washer and
    separate the inlet
    hose.3Pull the inlet filter
    out.4Remove the dirt
    from the inlet filter
    with a brush.
    1. Open the lower cover(1) by
    using a coin. Remove the cap
    hose(2) to pull out the hose.2. Unplug the cap hose(2), allowing
    the water to flow out. At this time
    use a vessel to prevent water
    flowing on to the floor. When water
    does not flow any more, turn the
    pump filter(3) open to the left.3. Remove any foreign material
    from the pump filter(3). After
    cleaning, turn the pump filter
    clockwise and insert the cap
    hose(2) to the original place.
    Close the lower cover.
    1
    100
    232
    3
     
    						
    All Daewoo manuals Comments (0)

    Related Manuals for Daewoo Dwdf1011 Instruction Manual