Home > Dell > Printer > DELL 1133n User Manual

DELL 1133n User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual DELL 1133n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Internet  Explorer®  5.0 or higher  is the minimum requirement  for all Windows operating  systems.
    Administrator rights are required  to  install the software.
    Windows Terminal Services is compatible with this machine.
    Macintosh
    OPERATING
    SYSTEMRequirements (recommended)
    CPU
    RAM free HDD
    space
    Mac OS X  10.3  ~
    10.4
    Intel® Processors
    PowerPC  G4/  G5
    128 MB  for a  PowerPC  based Mac
    (512  MB)
    512 MB  for a  Intel-based Mac (1  GB) 1 GB
    Mac OS X  10.5
    Intel® Processors
    867 MHz or faster Power PC
    G4/  G5 512 MB  (1  GB)
    1 GB
    Mac OS X  10.6
    Intel® Processors 1 GB (2  GB)
    1 GB
    Linux
    ItemRequirement  (recommended)
    Operating system RedHat® Enterprise Linux  WS  4, 5 (32/64 bit)
    Fedora  Core 2~10 (32/64 bit)
    SuSE Linux  9.1 (32 bit)
    OpenSuSE®  9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0, 11.1  (32/64 bit)
    Mandrake 10.0, 10.1  (32/64 bit)
    Mandriva  2005, 2006, 2007, 2008, 2009 (32/64 bit)
    Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10  (32/64 bit)
    SuSE Linux  Enterprise Desktop  9, 10  (32/64 bit)
    Debian 3.1, 4.0, 5.0 (32/64 bit)
    CPU Pentium®  IV  2.4 GHz (Intel  Core™2)
    RAM 512 MB  (1024 MB)
    Free  HDD space 1 GB (2  GB)
    It is necessary  to  claim swap partition of 300 MB  or larger  for working with large  scanned images.
    The  Linux  scanner  driver  supports  the optical resolution at maximum.
    Installing USB connected machine’s driver
    A  locally connected machine is a  machine directly attached  to  your  computer  using  the USB  cable. )
    Only use an USB  cable  shorter  than  3 m (118  in.  ).
    Windows
    You  can  install the machine software using  the typical  or custom method.
    The  following steps below  are recommended for most users  who use a  machine directly connected to  your
    computer. All components  necessary  for machine operations will be installed.
    1.  Make sure  that  the machine is connected to  the computer  and  powered on.
    If  the “ Found New Hardware  Wizard ” window  appears during the installation procedure, click   Cancel
    in close  the window.
    2 .  Insert the supplied  software CD into your  CD/DVD drive.
    The  software CD should automatically run  and  an installation window  should appear.
    If  the installation window  does  not appear,  click   Start and  then  Run .  Type  X:\Setup.exe ,  replacing “X”
    with the letter  which represents your  CD/DVD drive. Click   OK.
    If  you use Windows Vista,  Windows 7, or Windows 2008 Server R2 click   Start > All programs  >
    Accessories  > Run.
    Type  X:\ Setup.exe  replacing “X”  with the letter  which represents your  CD/DVD drive  and  click   OK.
    If  the AutoPlay  window  appears in Windows Vista,  Windows 7, or Windows 2008 Server R2,  click   Run
    Setup.exe  in Install or  run  program  field, and  click  Continue  or Yes in the User Account  Control
     
    						
    							windows.
    3 .  Click   Next.
    If  necessary, select a  language from  the drop -down  list.
    4 .  Select  Typical  installation for a  local  printer. Then,  click   Next.
    The  Custom  allows  you to  select the machine’s  connection  and  choose individual component  to  install.
    Follow the on-screen instructions.
    If  your  machine is not connected to  the computer, the following window  will appear.
     
    						
    							After connecting  the machine,  click  Next.
    If  you don’t  want  to  connect the printer at this time,  click  Next,  and  No  on the following screen. The
    installation starts  and  a  test page  will not print  at the end  of the installation.
    The  installation window  in this user  guide may differ depending on the machine and  interface in use.
    5 .  After the installation is finished,  a  window  asking you to  print  a  test page  appears.  If  you choose to  print  a  test
    page, select the checkbox  and  click  Next .  Otherwise, just click  Next and  skip  to  step 7.
    6 .  If  the test page  prints out correctly, click   Yes.
    If  not, click  No  to  reprint it.
    7 .  Click   Finish .
    If  the printer driver  does  not work  properly, follow  the steps below  to  repair  or reinstall the driver.
    a.  Make sure  that  the machine is connected to  your  machine and  powered on.
    b .  From the Start  menu,  select Programs  or All Programs > Dell > Dell  Printers  > your printer driver
    name  > Maintenance .
    c .  Select the option as you wish,  follow  the instruction on the window.
    Macintosh
    The  software CD provides  the driver  files  that  allow you to  use the CUPS driver  for printing on a  Macintosh
    computer.
    Also, it  provides  you with the TWAIN driver  for scanning  on a  Macintosh  computer.
    1.  Make sure  that  the machine is connected to  your  computer  and  powered on.
    2 .  Insert the supplied  software CD into your  CD/DVD drive.
    3 .  Double -click  the CD-ROM icon that  appears on your  Macintosh  desktop.
    4 .  Double -click  the MAC_Installer  folder.
    5 .  Double -click  the Installer OS X  icon.
    6 .  Enter  the password and  click  OK .
    7 .  The   Dell Installer window  opens.  Click  Continue .
    8 .  Read  the license agreement  and  click  Continue .
    9 .  Click   Agree  to  agree  to  the license agreement.
    10 . Select  Easy  Install  and  click  Install . Easy  Install  is recommended for most users. All components  necessary
    for machine operations will be installed.
    If  you select Custom Install ,  you can  choose individual components  to  install.
    11 . When  the message  which warns that  all applications  will close  on your  computer  appears,  click   Continue.
    12 . After the installation is finished,  click   Quit.
    If  you have  installed  scanner  driver, click   Restart.
    13 . Open the  Applications  folder > Utilities  > Print Setup Utility .
     
    						
    							For  Mac OS X  10.5  ~ 10.6, open the Applications folder > System Preferences   and  click  Print &  Fax .
    14 . Click   Add on the Printer List .
    For  Mac OS X  10.5  ~ 10.6, press  the “ +” icon; a  display  window  will pop  up.
    15 . For  Mac OS X  10.3, select the USB  tab.
    For  Mac OS X10.4, click  Default  Browser and  find the USB  connection.
    For  Mac OS X  10.5  ~ 10.6, click   Default and  find the USB  connection.
    16 . For  Mac OS X  10.3, if Auto Select does  not work  properly, select  Dell in Printer Model  and  your  machine
    name in Model  Name .
    For  Mac OS X  10.4, if Auto Select does  not work  properly, select  Dell in Print Using  and  your  machine
    name in Model .
    For  Mac OS X  10.5  ~ 10.6, if Auto Select does  not work  properly, select  Select  a  driver  to use... and
    your  machine name in  Print Using.
    Your  machine appears on the  Printer List,  and  is set  as the default machine.
    17 . Click   Add.
    If  the printer driver  does  not work  properly, uninstall the driver  and  reinstall it.
    Follow steps below  to  uninstall the driver  for Macintosh.
    a.  Make sure  that  the machine is connected to  your  computer  and  powered on.
    b .  Insert the supplied  software CD into your  CD/DVD drive.
    c .  Double -click  CD-ROM icon that  appears on your  Macintosh  desktop.
    d .  Double -click  the MAC_Installer  folder.
    e .  Double -click  the Installer OS X  icon.
    f .  Enter  the password and  click  OK .
    g .  The   Dell Installer window  opens.  Click  Continue .
    h .  Select  Uninstall  and  click  Uninstall .
    i .  When  the message  which warns that  all applications  will close  on your  computer  appears,  click   Continue.
    j .  When  the uninstall is done, click   Quit.
    Linux
    Follow the steps below  to  install the driver  for Linux. While  installing  the driver, the Unified Linux  Driver  package
    will automatically be installed  as well.
    The  supplied  software CD provides  you with the Unified Linux  Driver  package for using  your  machine with a
    Linux  computer  easily  in UI based management tool.
    1 .  Make sure  that  the machine is connected to  your  computer  and  powered on.
    2 .  When  the  Administrator Login  window  appears,  type in root in the  Login field and  enter the system
    password.
    You  must  log  in as a  super user  (root)  to  install the machine software.  If  you are not a  super user, ask
    your  system  administrator.
    3 .  Insert the supplied  software CD into your  CD/DVD drive.
    The  software CD will run  automatically.
    If  the software CD does  not run  automatically,  click  the 
     icon at the bottom  of the desktop. When  the
    Terminal screen appears,  type in the following:
    If  the software CD is secondary master  and  the location to  mount is /mnt/cdrom,
    [root@localhost  root]#mount -t iso9660  /dev/hdc /mnt/cdrom
    [root@localhost  root]#cd /mnt/cdrom/Linux
    [root@localhost  Linux]#./install.sh
    If  you still failed to  run  the software CD type the followings in sequence:
    [root@localhost  root]#umount  /dev/hdc
    [root@localhost  root]#mount -t iso9660  /dev/hdc /mnt/cdrom
    The  installation program  runs automatically if you have  an autorun  software package installed  and
    configured.
    4 .  When  the welcome screen appears,  click  Next .
     
    						
    							5.  When  the installation is complete,  click   Finish.
    The  installation program  has  added the Unified Driver  Configurator  desktop icon and  the Unified Driver  group to  the
    system  menu  for your  convenience. If  you have  any difficulties, consult the on screen help that  is available  through
    your  system  menu  or can  otherwise  be called from  the driver  package Windows applications, such as  Unified
    Driver Configurator  or Image Manager.
    Installing the driver  in the text mode:
    If  you do not use the graphical interface or have  been  unable  to  install the driver, you have  to  use the
    driver  in the text mode.
    Follow the steps 1 to  3, then  type [root@localhost  Linux]# ./install.sh.  Follow the instructions on the
    terminal  screen. The  installation is completed.
    When  you want  to  uninstall the driver, follow  the installation instructions above, but type [root@localhost
    Linux]# ./uninstall.sh on the terminal  screen.
    If  the printer driver  does  not work  properly, uninstall the driver  and  reinstall it.
    Follow the steps below  steps to  uninstall the driver  for Linux.
    a.  Make sure  that  the machine is connected to  your  computer  and  powered on.
    b .  When  the  Administrator Login  window  appears,  type in “root” in the  Login field and  enter the system
    password.
    You  must  log  in as a  super user  (root)  to  uninstall the printer driver. If  you are not a  super user, ask your
    system  administrator.
    c .  Insert the supplied  software CD into your  CD/DVD drive.
    The  software CD will run  automatically.
    If  the software CD does  not run  automatically,  click  the 
     icon at the bottom  of the desktop. When  the
    Terminal screen appears,  type in:
    If  the software CD is secondary master  and  the location to  mount is /mnt/cdrom,
    [root@localhost  root]#mount -t iso9660  /dev/hdc /mnt/cdrom
    [root@localhost  root]#cd /mnt/cdrom/Linux
    [root@localhost  Linux]#./uninstall.sh
    The  installation program  runs automatically if you have  an autorun  software package installed  and
    configured.
    d .  Click   Uninstall .
    e .  Click   Next.
    f .  Click   Finish .
    Sharing your machine locally
    Follow the steps below  to  set  up  the computers to  share  your  machine locally.
    If  the host computer  is directly connected to  the machine with a  USB  cable  and  is also  connected to  the local  network
    environment, the client  computers connected to  the local  network can  use the shared machine through the host
    computer  to  print.
     
    						
    							1Host  computer
    A  computer  which is directly connected to  the machine by USB  cable.
    2 Client computers
    Computers which use the machine shared through the host computer.
    Windows
    Setting up a host  computer
    1.  Install your  printer driver  (See Installing USB  connected machine’s  driver ).
    2 .  Click  the Windows  Start menu.
    3 .  For  Windows 2000, select  Settings > Printers .
    For  Windows XP/Server 2003, select Printers and Faxes .
    For  Windows Server 2008/Vista,  select Control  Panel > Hardware  and Sound  > Printers .
    For  Windows 7, select Control  Panel  > Hardware  and Sound  > Devices and Printers .
    For  Windows Server 2008 R2,  select  Control  Panel > Hardware  > Devices and Printers .
    4 .  Right click  your  printer icon.
    5 .  For  Windows XP/Server 2003/Server 2008/Vista,  select  Properties.
    For  Windows 7 or Windows Server 2008 R2,  from  context menus, select the  Printer properties.
    If  Printer properties  item has  ► mark, you can  select other printer drivers connected with selected
    printer.
    6 .  Select the Sharing  tab.
    7 .  Check the Change  Sharing  Options .
    8 .  Check the Share  this  printer .
    9 .  Fill in the  Share  Name  field. Click  OK .
    Setting up a client computer
    1.  Install your  printer driver  (See Installing USB  connected machine’s  driver ).
    2 .  Click  the Windows  Start menu.
    3 .  Select  All programs  > Accessories   > Windows Explorer .
    4 .  Enter  in IP  address of the host computer  and  press  Enter  in your  keyboard.
    In case host computer  requires   User name and  Password ,  fill  in User  ID  and  password of the host
    computer  account.
    5 .  Right click  the printer icon you want  to  share  and  select  Connect.
    6 .  If  a  set  up  complete  message  appears,  click   OK.
    7 .  Open the file you want  to  print  and  start  printing.
    Macintosh
    The  following steps are for Mac OS X  10.5  ~ 10.6. Refer to  Mac Help for other OS versions.
    Setting up a host  computer
    1.  Install your  printer driver  (See Macintosh ).
    2 .  Open the  Applications  folder > System Preferences   and  click  Print &  Fax .
    3 .  Select the printer to  share  in the  Printers list.
    4 .  Select  Share  this  printer .
    Setting up a client computer
    1.  Install your  printer driver  (See Macintosh ).
    2 .  Open the  Applications  folder > System Preferences   and  click  Print &  Fax .
     
    						
    							3.  Press  the “ +” icon.
    A  display  window  showing  the name of your  shared printer appears.
    4 .  Select your  machine and  click   Add.
     
    						
    							Maintenance
    This chapter provides  information  for maintaining your  machine and  the toner cartridge.
    This chapter includes:
    Printing  a  machine report
    Monitoring the supplies life
    Using toner low  alert
    Finding the serial  number
    Cleaning the machine
    Storing the Toner cartridge
    Tips for moving & storing your  machine
    Printing a machine report
    You  can  print  the machines  information  and  job report.1.  Press   Menu (
    ) on the control panel.
    2 .  Press  the left/right  arrow until System Setup  appears and  press  OK.
    3 .  Press  the left/right  arrow until Report  appears and  press  OK.
    4 .  Press  the left/right  arrow until the report or list you want  to  print  appears and  press   OK.
    To print  all reports  and  lists,  select  All Reports.
    5 .  Press  the left/right  arrow until Yes  appears at the Print? prompt and  press  OK .
    Monitoring the supplies life
    If  you experience frequent  paper jams  or printing problems,  check  the number of pages the machine has  printed.
    Replace the corresponding  parts,  if necessary.
    1.  Press   Menu (
    ) on the control panel.
    2 .  Press  the left/right  arrow until System Setup  appears and  press  OK.
    3 .  Press  the left/right  arrow until Maintenance  appears and  press  OK.
    4 .  Press  the left/right  arrow until Supplies  Life  appears and  press  OK.
    5 .  Press  the left/right  arrow until the item you want  appears and  press   OK.
    Supplies  Info : Prints  the supply  information  page.
    Total: Displays  the total  number of pages printed.
    Platen Scan : Displays  the number of pages scanned using  the scanner  glass.
    6 .  Press   Stop/Clear  (
    ) to  return  to  ready  mode.
    Using toner low alert
    If  the amount  of toner in the cartridge is low, a  message  informing user  to  change  the toner cartridge appears.  You
    can  set  the option for this message  to  appear or not.
    In the control panel
    1.  Press   Menu () on the control panel.
    2 .  Press  the left/right  arrow until System Setup  appears and  press  OK.
    3 .  Press  the left/right  arrow until Maintenance  appears and  press  OK.
    4 .  Press  the left/right  arrow until Toner Low Alert  appears and  press  OK.
    5 .  Select the appropriate setting  and  then  click   OK.
    6 .  Press   Stop/Clear  (
    ) to  return  to  ready  mode.
    In the computer
    1.  Ensure  that  you have  installed  the printer driver  with the provided  Printer  Software CD.
    2 .  You  can  launch Printer  Settings Utility  from  the Start menu,  select Programs  or All Programs > Dell > Dell
     
    						
    							Printers > your printer driver  name  > Printer Settings Utility.
    3 .  Click   Printer Setting .
    4 .  Click   Setting  > Toner Low Alert .  Select the appropriate setting  and  then  click   Apply.
    Finding the serial number
    When  you call  for service  or register  as a  user  on the Dell website,  the machine’s  serial  number by taking the
    following steps:
    1.  Press   Menu (
    ) on the control panel.
    2 .  Press  the left/right  arrow until System Setup  appears and  press  OK.
    3 .  Press  the left/right  arrow until Maintenance  appears and  press  OK.
    4 .  Press  the left/right  arrow until Serial Number  appears and  press  OK.
    5 .  Check your  machine’s  serial  number.
    6 .  Press   Stop/Clear  (
    ) to  return  to  ready  mode.
    Cleaning the machine
    If  printing quality problems occur or if you use your  machine in a  dusty  environment, you need  to  clean your  machine
    regularly  to  keep the best printing condition and  use your  machine longer.
    Cleaning the cabinet of the machine with cleaning materials containing  large  amounts  of alcohol, solvent, or
    other strong substances can  discolor  or distort the cabinet.
    If  your  machine or the surrounding area is contaminated  with toner,  use a  cloth  or tissue  dampened  with
    water  to  clean it.  If  you use a  vacuum cleaner,  toner blows  in the air and  might be harmful.
    Cleaning the outside
    Clean the machine cabinet with a  soft, lint-free cloth. Dampen  the cloth  slightly  with water, but be careful not to  let
    any water  drip  onto or into the machine.
    Cleaning the inside
    During  the printing process,  paper, toner,  and  dust  particles can  accumulate inside  the machine.  This buildup  can
    cause print  quality problems,  such as toner specks or smearing.  Cleaning the inside  of the machine clears  and
    reduces these problems.
    1.  Turn the machine off and  unplug  the power cord. Wait  for the machine to  cool  down.
    2 .  Open the front door  and  pull the toner cartridge out. Set  it  on a  clean flat surface
    To prevent  damage  to  the toner cartridge,  do not expose it  to  light  for more  than  a  few  minutes.
    Cover  it  with a  piece  of paper, if necessary.
    Do not touch the green surface underside  of the toner cartridge.  Use  the handle  on the cartridge to
    avoid  touching this area.
    3 .  With a  dry,  lint-free cloth, wipe away  any dust  and  spilt  toner from  the toner cartridge area.
     
    						
    							While  cleaning the inside  of the machine,  be careful not to  damage  the transfer roller  or any other inside
    parts.  Do not use solvents such as benzene or thinner  to  clean. Printing  quality problems can  occur and
    cause damage  to  the machine.
    4 .  Locate  the long strip of glass (LSU) inside  the top of the cartridge compartment and  gently  clean the glass with
    a  swab.
    5.  Reinsert the toner cartridge and  close  the front door.
    6 .  Plug in the power cord  and  turn  the machine on.
    Cleaning the scan unit
    Keeping the scan  unit  clean helps ensure the best possible copies.  We  suggest that  you clean the scan  unit  at the
    start  of each  day and  during the day,  as needed.
    1.  Slightly dampen a  soft, lint-free cloth  or paper towel  with water.
    2 .  Open the scanner  lid.
    3 .  Wipe the surface of the scanner  glass and  the document feeder  glass until it  is clean and  dry.
    1.  Scanner  lid
    2 .  Scanner  glass
    3 .  Document feeder  glass
    4 .  White bar
     
    						
    All Dell manuals Comments (0)

    Related Manuals for DELL 1133n User Manual