Dell 1707fp Users Guide

							Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™
USFF Computer
About Your Monitor
Front View 
Back View
Side  View
Bottom View
Monitor Specifications
Caring  for Your  Monitor  
Using Your Adjustable Monitor Stand
Height  Adjustment
Tilt Adjustment
Setting Up Your Monitor
      Cable Connections on the Back of the Monitor and  the
Computer
        Removing the cable  cover and  cables from  the computer
       Detaching the Monitor from  the Stand
        Using the OSD
       Setting  the Optimal  Resolution
        Using the Dell Soundbar (Optional)
 
Solving Problems
Troubleshooting Your  Monitor
General Problems
Product Specific  Problems
USB  Problems
Troubleshooting Your  Soundbar
 
 
 
Appendix
CAUTION: Safety Instructions
FCC Identification  Information
Contacting Dell
Your  Monitor Set -up  Guide
 
Information in this  document is  subject  to  change  without  notice.
©  2006  Dell Inc.  All rights  reserved.
Reproduction  in  any  manner whatsoever without the  written  permission  of Dell  Inc.  is strictly forbidden.
Trademarks used in  this  text:  Dell™, PowerEdge™, PowerConnect™, PowerVault™, Dell™ Dimension™,  Inspiron™, OptiPlex™, Latitude™,  Dell
Precision™  and Dell  | EMC  are  trademarks of Dell  Inc;   Microsoft,  Windows and Windows NT are  registered trademarks of Microsoft
Corporation;  Adobe  is a  trademark  of Adobe  Systems Incorporated,  which may be  registered in  certain  jurisdictions.   ENERGY STAR is a
registered trademark  of the  U.S.  Environmental Protection Agency.  As  an  ENERGY STAR partner, Dell  Inc.  has determined  that  this  product
meets the  ENERGY STAR guidelines  for energy efficiency. EMC  is a  registered trademark  of EMC Corporation.
Other  trademarks and trade  names  may be  used in  this  document to  refer to  either  the  entities claiming the  marks  and names  or  their
products.  Dell  Inc.  disclaims any  proprietary interest  in  trademarks and trade  names  other than its own.
February 2006
 
 
						

							Back to  Contents Page
About Your Monitor
Dell™ 1707FP AIO  Color  Monitor  For Dell™ OptiPlex™ USFF Computer
  Front View
  Back View
  Bottom View
  Side  View
  Monitor Specifications
  Caring  for Your  Monitor
Front View
1. Video input select
2. OSD menu  / select button
3. Down button
4. Up  button
5. Power button (with power light  indicator)
Back View
1. Dell Soundbar mounting  brackets  — Attach the optional  Dell Soundbar.
 
						

							2.Security lock slot —   Attach a  lock to  secure your  monitor.
3. Barcode serial  number label — Refer to  this label if you need  to  contact  Dell for technical  support
4. VESA  mounting  holes (100mm [Behind attached  base  plate]) — Use  to  mount the monitor.
5. Stand  removal button — Press  to  release  the stand.
6. Regulatory  rating label — Lists  the regulatory  approvals.
7. Thumbscrews —  Fasten the chassis  to  the stand  with thumbscrews.
Bottom View
1.Power connector  - Connect the power cable
2. Dell Soundbar power connector  - Connect the power cord  for the Soundbar (optional)
3. DVI connector  - Connect your  computer  DVI cable
4. VGA connector  - Connect your  computer  VGA cable
5. USB  upstream  connector  - Connect the
  USB  cable  that  came  with your  monitor to  the monitor and  the computer. Once this cable  is connected you can  use the USB
connectors on the side  and  bottom  of the monitor.  
6. USB  connector  - Connect your  USB  devices.  You  can  only  use this connector  after you have  connected the USB  cable  to  the computer  and  USB  upstream  connector  on
the monitor.
Side View
USB  connectors (downstream) 
Left  side  Right side 
Monitor Specifications
Power Management Modes
If  you have  VESAs DPM™  compliance display  card  or software installed  in your  PC, the monitor can  automatically reduce its  power consumption  when  not in use.  This is
referred to  as Power Save Mode*.  If  input from  keyboard,  mouse or other input devices is detected  by the computer, the monitor will automatically wake up. The  following
 
						

							table shows  the power consumption  and  signaling of this automatic power saving feature:
VESA  ModesHorizontal SyncVertical SyncVideoPower Indicator Power Consumption
Normal operation( with Dell Soundbar and  USB  active) ActiveActiveActiveGreen 75  W (maximum)
Normal operation ActiveActiveActiveGreen 35  W (typical)
Active-off mode InactiveInactiveBlankedAmber Less  than  2 W
Switch off ---Off Less  than  1 W
NOTE: The OSD will  only function in the normal operation mode. Otherwise  one of  the following messages  will
appear when the “menu” or  “plus”  buttons are pressed when in Active-off  mode.
1. Analog  Input
In Power Save Mode
Press  Any Key on Keyboard  or Move Mouse  
 or    2. Digital Input
In Power Save Mode
Press  Any Key on Keyboard  or Move Mouse
Activate the computer  and  wake up  the monitor to  gain access  to  the  OSD
.
This monitor is  ENERGY STAR ®-compliant as well as TCO  99 / TCO  03 power management compatible.
* Zero power consumption  in OFF  mode can  only  be achieved  by disconnecting  the main cable  from  the monitor.
ENERGY STAR® is a  U.S. registered mark. As an  ENERGY STAR® Partner, DELL  has  determined that  this product meets the  ENERGY STAR® guidelines for energy
efficiency.
Pin Assignments
15-pin  D-Sub connector:
Pin Number Monitor Side of  the 15 -pin  Side Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5V
10 GND
11 GND
12 DDC data
13 H -sync
14 V -sync
15 DDC clock
24 pin  digital-only DVI connector:
Note: Pin  1 is at the top right.
 
						

							PinSignal  Assignment PinSignal  Assignment PinSignal  Assignment
1 T.M.D.S. Data 2- 9T.M.D.S. Data 1- 17T.M.D.S. Data 0-
2 T.M.D.S. Data 2+ 10T.M.D.S. Data 1+ 18T.M.D.S. Data 0+
3 T.M.D.S. Data 2 Shield 11T.M.D.S. Data 1 Shield 19T.M.D.S. Data 0 Shield
4 No  Connect 12No  Connect 20No  Connect
5 No  Connect 13No  Connect 21No  Connect
6 DDC Clock 14+5V Power 22T.M.D.S. Clock  Shield
7 DDC Data 15self-test 23T.M.D.S. Clock  +
8 No  Connect 16Hot  Plug Detect 24T.M.D.S. Clock  -
Universal Serial Bus (USB)  Interface
This monitor supports  High -Speed Certified USB  2.0 interface.*
 Data Rate Power Consumption
High  speed 480 Mbps 2.5W (Max., each  port)
Full  speed 12  Mbps 2.5W (Max., each  port)
Low speed 1.5 Mbps 2.5W (Max., each  port)
USB ports:
1 upstream  - rear4 downstream  - 2 on rear;  2 on left  side
NOTE:   USB 2.0  capability requires  2.0 capable computer  
NOTE:  Monitors  USB interface  works  ONLY when monitor  is  Powered  ON  (or in Power Save  Mode). Switching your monitor  OFF and then ON  would  re-
enumerate  its USB interface; attached peripherals may take a  few seconds to resume  normal functionality.
Plug and Play Capability
You  can  install the monitor in any Plug and  Play-compatible system. The  monitor automatically provides  the computer  system  with its  Extended  Display Identification  Data
(EDID)  using  Display Data Channel (DDC) protocols so the system  can  configure itself and  optimize  the monitor settings. If  desired,  the user  can  select different settings, but in
most cases  monitor installation is automatic.
General
Model  number 1707FP AIO For  Dell™ OptiPlex™ USFF
Flat Panel
Screen typeActive matrix  - TFT LCD
Screen dimensions 17  inches  (17-inch viewable image size)
Preset display  area: Horizontal 337 mm  (13.3 inches)
Vertical 270 mm  (10.6 inches)
Pixel  pitch 0.264 mm
Viewing angle 130° (vertical)  typ, 140° (horizontal) typ
Luminance  output 300 CD/m ²(typ)
Contrast  ratio 600 to  1 (typ)
Faceplate  coating Antiglare  with hard-coating 3H
Backlight CCFL  (4) edgelight system
Response Time 8ms typical
Resolution
Horizontal  scan  range30  kHz to  81  kHz (automatic)
Vertical  scan  range 56 Hz  to  76  Hz  (automatic)
Optimal  preset resolution 1280 x  1024 at 60  Hz
Highest preset resolution 1280 x  1024 at 75  Hz
Preset Display Modes
 
						

							Display ModeHorizontal Frequency  (kHz) Vertical Frequency  (Hz)Pixel Clock  (MHz)Sync Polarity (Horizontal/Vertical)
VESA, 720 x  400 31.570.028.3 -/+
VESA, 640 x  480 31.560.025.2 -/-
VESA, 640 x  480 37.575.031.5 -/-
VESA, 800 x  600 37.960.349.5 +/+
VESA, 800 x  600 46.975.049.5 +/+
VESA, 1024 x  768 48.460.065.0 -/-
VESA, 1024 x  768 60.075.078.8 +/+
VESA, 1152 x  864 67.575.0108 +/+
VESA, 1280 x  1024 64.060.0135.0 +/+
VESA, 1280 x  1024 80.075.0135.0 +/+
Electrical
Video input signals Analog  RGB,  0.7 Volts +/ -5%, positive polarity at 75  ohm input impedance
Digital DVI-D  TMDS,  600mV for each  differential line, positive polarity at 50  ohm input
impedance
Synchronization input signals Separate  horizontal and  vertical  synchronizations,  polarity-free TTL level,  SOG (Composite SYNC
on green)
AC input voltage  / frequency / current 100 to  240 VAC / 50  or 60  Hz  +
 3 Hz  / 2.0A (Max.)
Inrush  current 120V:42A (Max.)
240V:80A (Max.)
Physical Characteristics
Connector  type 15 -pin  D -subminiature,  blue connector; DVI-D, white connector
Signal  cable  type Digital: Detachable, DVI-D, Solid pins,  shipped attached  to  the monitor
Dimensions (with stand): Height  (Compressed) 16.66 inches  (423.24 mm)
Height  (Extended) 20.2  inches  (513.24 mm)
Width 14.65.  inches  (372.1  mm)
Depth 10.44 inches  (265.2  mm)
Dimensions:  (without stand)  
Height   12.17 inches  (309.1  mm)
Width 14.65 inches  (372.1  mm)
Depth 2.32  inches  (59 mm)
Stand  dimensions:  
Height  (Compressed) 16.19 inches  (411.28 mm)
Height  (Extended) 16.86 inches  (428.32 mm)
Width 12.17 inches  (309.2  mm)
Depth 10.44 inches  (265.2  mm)
Weight  with packaging 19.14 lbs  (8.7  kg)
Weight  with stand  assembly and  cables 14.63 lbs  (6.65 kg)
Weight  without  stand  assembly
(For wall mount or VESA  mount considerations - no cables) 7.7 lbs  (3.5  kg)
Weight  of stand  assembly 6.93  lbs  (3.15 kg)
 
						

							Environmental
Temperature:Operating 5°  to  35°C  (41°  to  95°F)
Nonoperating Storage: -20° to  60°C  (-4°  to  140°F)
Shipping: -20° to  60°C(-4°  to  140°F)
Humidity: Operating 10%  to  80%  (noncondensing)
Nonoperating Storage: 5% to  90%  (noncondensing)
Shipping: 5% to  90%(noncondensing)
Altitude: Operating 3,657.6m (12,000 ft) max
Nonoperating 12,192 m (40,000 ft) max
Thermal dissipation 256.08 BTU/hour (maximum)
109.261  BTU/hour (typical)
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor. 
CAUTION: Before  cleaning the monitor, unplug the monitor  from the electrical outlet.  
To clean your  antistatic  screen, lightly dampen a  soft, clean cloth  with water. If  possible, use a  special screen-cleaning tissue  or solution  suitable for the antistatic
coating.  Do not use benzene, thinner, ammonia,  abrasive cleaners, or compressed  air.
Use  a  lightly-dampened, warm cloth  to  clean the plastics.  Avoid  using  detergent of any kind as some  detergents leave a  milky film on the plastics.  If  you notice  a  white powder  when  you unpack  your  monitor,  wipe it  off with a  cloth. This white powder  occurs during the shipping of the monitor.Handle your  monitor with care as darker -colored plastics may scratch and  show white scuff marks  more  than  lighter-colored monitor.  To help maintain  the  best image quality on your  monitor, use a  dynamically changing screen  saver and power off your monitor  when  not  in  use.
Back to  Contents Page
 
 
						

							Back to  Contents Page
Using Your Adjustable Monitor Stand
Dell™ 1707FP AIO  Color  Monitor  For Dell™ OptiPlex™ USFF Computer
  Height  Adjustment
   Tilt Adjustment
Height Adjustment
Stand  extends vertically 90mm for viewing comfort.
Tilt Adjustment
Viewing angle can  be adjusted  40 forward  and  210 backwards for viewing comfort.
 
Back to  Contents Page
 
						

							Back to  Contents Page
Setting Up Your Monitor
Dell™ 1707FP AIO  Color  Monitor  For Dell™ OptiPlex™ USFF Computer
  Cable Connections on the Back of the Monitor and  the Computer
  Removing the Cable Cover  and  Cables from  the Computer
  Detaching the Monitor from  the Stand
   Using the OSD
  Setting  the Optimal  Resolution
  Using the Dell Soundbar (Optional)
Cable Connections on the Back of the Monitor and the Computer
1. Attach the monitor to  the stand.
a) Fit the groove on the back  of the monitor onto the two metal  tabs on stand.
b) Lower  the monitor until it  locks  in to  place  on the stand.
 
NOTE: The stand is  detached and extended when the monitor  is  shipped from the factory.
 
NOTE: If you want to mount your AIO  stand to a  desk top, see  the  AIO Stand  Template  Sheet (*.pdf)  
2. Slide the computer  onto the stand. Push it  in until the computer  touches the locating  tab in the stand.