Dell 1907fpv Users Guide

							Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/index.htm[8/7/2012 10:06:33 AM]
Dell™ 1907FPV Flat Panel Monitor Users Guide
About Your Monitor
Front View
Back View
Side  View
Bottom View
Monitor Specifications
Cleaning Your  Monitor
Using Your Adjustable Monitor Stand
Attaching  the Stand
Organizing Your  Cables
Using the Tilt,  Swivel,  and  Vertical  Extension
Removing the Stand
Setting Up Your Monitor
Connecting Your  Monitor
Using the Front Panel
Using the OSD
Setting  the Optimal  Resolution
Using the Dell Soundbar (Optional)
 
Rotating Your Monitor
Changing the Rotation of Your  Monitor
Rotating Your  Operating System
Solving Problems
Troubleshooting Your  Monitor
General Problems
Product Specific  Problems
USB  Problems
Troubleshooting Your  Soundbar
 
Appendix
Safety Information
FCC Notice (U.S.  Only)
Contacting Dell
Your  Monitor Setup  Guide
Notes, Notices, and Cautions
NOTE:  A  NOTE indicates  important  information  that  helps you make  better  use of your  computer.
NOTICE:  A  NOTICE indicates  either  potential damage  to  hardware or loss  of data and  tells you how to  avoid  the
problem.
CAUTION:  A  CAUTION indicates a  potential  for  property  damage, personal  injury,  or  death.
Information in this  document is  subject  to  change  without  notice.
© 2006  Dell Inc.  All rights  reserved.
Reproduction  in  any  manner whatsoever without the  written  permission  of Dell  Inc.  is strictly forbidden.
Trademarks used in  this  text:  Dell , the  DELL logo, Inspiron , Dell  Precision , Dimension , OptiPlex , Latitude,  PowerEdge, PowerVault, PowerApp,  and
Dell  OpenManage  are  trademarks of Dell  Inc;   Microsoft,  Windows, and Windows NT are  registered trademarks of Microsoft  Corporation;  Adobe is a
trademark  of Adobe  Systems Incorporated,  which may be  registered in  certain  jurisdictions.   ENERGY STAR is a  registered trademark  of the  U.S.
Environmental Protection Agency.  As  an  ENERGY STAR partner, Dell  Inc.  has determined  that  this  product  meets the  ENERGY STAR guidelines  for
energy efficiency.
Other  trademarks and trade  names  may be  used in  this  document to  refer to  either  the  entities claiming the  marks  and names  or  their  products.
Dell  Inc.  disclaims any  proprietary interest  in  trademarks and trade  names  other than its own.
Model  1907FPV
November 2006  Rev.  A02
 
 
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
Back to  Contents Page
About Your Monitor
Dell™ 1907FPV Flat Panel Monitor  Users Guide
  Front View
  Back View
  Bottom View
  Side  View
  Monitor Specifications
  Cleaning Your  Monitor
Front View
1. OSD menu  / select button
2. Video input select / Down button
3. Auto-adjust  / Up  button
4. Power button (with power light  indicator)
Back View
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
 
1VESA  mounting  holes (100mm)  (Behind
attached  base  plate) Use  to  mount the monitor.
2 Regulatory  rating label List the regulatory  approvals.
3 Security lock slot Use  a  security lock with the slot to  help secure your  monitor.
4 Dell Soundbar mounting  brackets Attach the optional  Dell Soundbar.
5 Barcode serial  number label Refer to  this label if you need  to  contact  Dell for technical  support.
6 Stand  removal button Press  to  release  the stand.
7 Cable holder Help organize cables by placing them  in the holder.
8 Lock  down/release button Push the monitor down, press  the button to  unlock  the monitor,  and  then
lift the monitor to  the desired height.
Bottom View
1Power
connector Insert the power cable.
2 Dell Soundbar
power
connector Connect the power cord  for the Soundbar (optional).
3 DVI connector Connect your  computer  DVI cable.
4 VGA
connector Connect your  computer  VGA cable.
5 USB  upstream
connector Connect the USB  cable  that  came  with your  monitor to  the monitor and  the computer.
Once this cable  is connected you can  use the USB  connectors on the side  and  bottom  of the
monitor.
 
6 USB
connector Connect your  USB  devices.
NOTE: 
You  can  use this connector  only  after you connect the USB  cable  to  the computer  and  the USB  upstream  connector  on the monitor.
Side View
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
USB  connectors (downstream)
Left  side Right side 
Monitor Specifications
Power Management Modes
If  you have  VESAs DPM™  compliance display  card  or software installed  in your  PC, the monitor can  automatically reduce its  power consumption  when  not in use.  This is
referred to  as Power Save Mode*.  If  input from  keyboard,  mouse,  or other input devices is detected  by the computer, the monitor automatically wakes up. The  following
table shows  the power consumption  and  signaling of this automatic power saving feature:
VESA  Modes Horizontal SyncVertical SyncVideoPower Indicator Power Consumption
Normal operation  (with Dell Soundbar and  USB  active) ActiveActiveActiveGreen 65  W (maximum)
Normal operation ActiveActiveActiveGreen 32  W (typical)
Active-off mode InactiveInactiveBlankedAmber Less  than  2 W
Switch off ---Off Less  than  1 W
NOTE: The  OSD will only  function in the normal operation  mode. One  of the following messages will appear when  the “menu”  or “plus” buttons are pressed when  in
Active-off mode.
1. Analog  Input
In Power Save Mode
Press  Computer Power Button
or Any Key on Keyboard  or Move Mouse or2. Digital Input
In Power Save Mode
Press  Computer Power Button
or Any Key on Keyboard  or Move Mouse
Activate the computer  and  wake up  the monitor to  gain access  to  the  OSD
.
This monitor is  ENERGY STAR ®-compliant as well as TCO  99 / TCO  03 power management compatible.
* Zero power consumption  in OFF  mode can  only  be achieved  by disconnecting  the main cable  from  the monitor.
Pin Assignments
15-pin  D-Sub connector
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
Pin NumberMonitor Side of  the 15 -pin  Side Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 DDC-GND
6 GND-R
7 GND-G
8 GND-B
9 DDC +5V
10 Self Test
11 GND
12 DDC data
13 H -sync
14 V -sync
15 DDC clock
24-pin  Digital-only DVI Connector
NOTE: Pin  1 is at the top right.
Pin Signal  Assignment PinSignal  Assignment PinSignal  Assignment
1 T.M.D.S. Data 2- 9T.M.D.S. Data 1- 17T.M.D.S. Data 0-
2 T.M.D.S. Data 2+ 10T.M.D.S. Data 1+ 18T.M.D.S. Data 0+
3 T.M.D.S. Data 2/4 Shield 11T.M.D.S. Data 1/3 Shield 19T.M.D.S. Data 0/5 Shield
4 No  Connect 12No  Connect 20No  Connect
5 No  Connect 13No  Connect 21No  Connect
6 DDC Clock 14+5V Power 22T.M.D.S. Clock  Shield
7 DDC Data 15Self Test 23T.M.D.S. Clock  +
8 No  Connect 16Hot  Plug Detect 24T.M.D.S. Clock  -
Universal Serial Bus (USB)  Interface
This monitor supports  High -Speed Certified USB  2.0 interface.
 Data Rate Power Consumption
High  speed 480 Mbps 2.5W (Max., each  port)
Full  speed 12  Mbps 2.5W (Max., each  port)
Low speed 1.5 Mbps 2.5W (Max., each  port)
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
USB ports:
1 upstream  - rear4 downstream  - 2 on rear;  2 on left  side
NOTE: USB  2.0  capability  requires  2.0-capable  computer.  
NOTE: The  USB  interface of the monitor works ONLY when  monitor is powered ON (or in Power Save Mode). Switching  your  monitor OFF  and  then  ON would re -
enumerate  its  USB  interface;  attached  peripherals  may take  a  few  seconds  to  resume normal  functionality.
Plug and Play Capability
You  can  install the monitor in any Plug and  Play-compatible system. The  monitor automatically provides  the computer  system  with its  Extended  Display Identification  Data
(EDID)  using  Display Data Channel (DDC) protocols so the system  can  configure itself and  optimize  the monitor settings. Most  monitor installations  are automatic; you can
select different settings, if desired.
General
Model  number 1907FPV
Flat Panel
Screen typeActive matrix  - TFT LCD
Screen dimensions 19  inches  (19-inch viewable image size)
Preset display  area: Horizontal 376 mm  (14.8 inches)
Vertical 301 mm  (11.85  inches)
Pixel  pitch 0.294 mm
Viewing angle 170° (vertical)  typ, 170° (horizontal) typ
Luminance  output 250 CD/m ²(typ)
Contrast  ratio 1000 to  1 (typ)
Faceplate  coating Antiglare  with hard-coating 3H
Backlight CCFL  (4) edgelight system
Response Time 20  ms typical
Resolution
Horizontal  scan  range30  kHz to  81  kHz (automatic)
Vertical  scan  range 56 Hz  to  76  Hz  (automatic)
Optimal  preset resolution 1280 x  1024 at 60  Hz
Highest preset resolution 1280 x  1024 at 75  Hz
Preset Display Modes
Display ModeHorizontal Frequency  (kHz) Vertical Frequency  (Hz)Pixel Clock
(MHz) Sync Polarity
(Horizontal/Vertical)
VESA, 720 x  400 31.570.028.3 -/+
VESA, 640 x  480 31.560.025.2 -/-
VESA, 640 x  480 37.575.031.5 -/-
VESA, 800 x  600 37.960.349.5 +/+
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
VESA, 800 x  60046.975.049.5 +/+
VESA, 1024 x  768 48.460.065.0 -/-
VESA, 1024 x  768 60.075.078.8 +/+
VESA, 1152 x  864 67.575.0108+/+
VESA, 1280 x  1024 64.060.0135.0 +/+
VESA, 1280 x  1024 80.075.0135.0 +/+
Electrical
Video input signals Analog  RGB,  0.7 Volts +/ -5%, positive polarity at 75  ohm input impedance
Digital DVI-D  TMDS,  600mV for each  differential line, positive polarity at 50  ohm input impedance
Synchronization input signals Separate  horizontal and  vertical  synchronizations,  polarity-free TTL level,  SOG (Composite SYNC on green)
AC input voltage  / frequency / current 100 to  240 VAC / 50  or 60  Hz  +
 3 Hz  / 1.5A
Inrush  current 120V:42A (Max.)
240V:80A (Max.)
Physical Characteristics
Connector  type 15 -pin  D -subminiature,  blue connector; DVI-D, white connector
Signal  cable  type Digital: Detachable, DVI-D, Solid pins, shipped detached  from  the monitor
Analog: Detachable, D -Sub, 15pins,  shipped attached  to  the monitor
Dimensions (with stand): Height  (Compressed) 16.4  inches  (416.75 mm)
Height  (Extended) 21.5  inches  (546.75 mm)
Width 16.35 inches  (415.3  mm)
Depth 8.62  inches  (218.9  mm)
Dimensions:  (without stand)  
Height   13.45 inches  (341.6  mm)
Width 16.35 inches  (415.3  mm)
Depth 2.81  inches  (71.43  mm)
Stand  dimensions:  
Height  (Compressed) 13.56 inches  (344.56 mm)
Height  (Extended) 18.54 inches  (471.06 mm)
Width 11.84 inches  (300.8  mm)
Depth 8.39  inches  (213.1  mm)
Weight  with packaging 21.1  lbs  (9.55 kg)
Weight  with stand  assembly and  cables 17.3  lbs  (7.85 kg)
Weight  without  stand  assembly
(For wall mount or VESA  mount considerations - no cables) 11  lbs  (5  kg)
Weight  of stand  assembly 5.2 lbs  (2.35 kg)
 
						

							About Your Monitor: Dell™ 1907FPV Flat Panel Monitor Users Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
Environmental
Temperature:Operating 5°  to  35°C  (41°  to  95°F)
Nonoperating Storage: -20° to  60°C  (-4°  to  140°F)
Shipping: -20° to  60°C(-4°  to  140°F)
Humidity: Operating 10%  to  80%  (noncondensing)
Nonoperating Storage: 5% to  90%  (noncondensing)
Shipping: 5% to  90%(noncondensing)
Altitude: Operating 3,657.6m (12,000 ft) max
Nonoperating 12,192 m (40,000 ft) max
Thermal dissipation 211.937  BTU/hour (maximum)
109.261  BTU/hour (typical)
Cleaning Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor. 
CAUTION: Before  cleaning the monitor, unplug the monitor  power  cable from the electrical outlet.  
To clean your  antistatic  screen, slightly  dampen a  soft, clean cloth  with water. If  possible, use a  special screen-cleaning tissue  or solution  suitable for the antistatic
coating.  Do not use benzene, thinner, ammonia,  abrasive cleaners, or compressed  air.
Use  a  slightly -dampened, warm cloth  to  clean the plastics.  Avoid  using  detergent of any kind as some  detergents leave a  milky film on the plastics.  If  you notice  a  white powder  when  you unpack  your  monitor,  wipe it  off with a  cloth. This white powder  occurs during the shipping of the monitor.Handle your monitor with care as darker -colored plastics may scratch and  show white scuff marks  more  than  lighter-colored monitor.  To help maintain the best image quality on your  monitor,  use a  dynamically changing screen saver and  power off your  monitor when  not in use.
Back to  Contents Page
 
						

							Using Your Adjustable Monitor Stand: Dell™ 1907FPV Flat Panel Monitor\
 Users Guide
file:///T|/htdocs/monitors/1907FPV/en/stand.htm[8/7/2012 10:06:42 AM]
Back to  Contents Page
Using Your Adjustable Monitor Stand
Dell™ 1907FPV Flat Panel Monitor  Users Guide
  Attaching  the Stand
   Organizing Your  Cables
  Using the Tilt,  Swivel,  and  Vertical  Extension  
  Removing the Stand 
Attaching the Stand
NOTE:  The  stand  is detached  and  extended when  the monitor is shipped from  the factory.
1.  Fit the groove on the monitor to  the three tabs on the stand.
2 .  Lower  the monitor until it  locks  in to  place  on the stand.
Organizing Your Cables
 
 
						

							Using Your Adjustable Monitor Stand: Dell™ 1907FPV Flat Panel Monitor\
 Users Guide
file:///T|/htdocs/monitors/1907FPV/en/stand.htm[8/7/2012 10:06:42 AM]
After attaching  all necessary  cables to  your  monitor and  computer, (See Connecting  Your  Monitor for cable  attachment,) use
the cable  holder to  neatly  organize all cables as shown above.
Using the Tilt, Swivel, and Vertical Extension
Adjusting Your  Monitor Using Tilt,  Swivel,  and  Vertical  Extension. You  can  adjust  your  monitor to  best fit  your  viewing needs.
You  can  adjust  the stand  vertically, up  to  5.12  inches  (130mm)  using  the stand  lock/release button. You  can  adjust  the
monitor to  the desired position  by sliding the monitor up  and  down  the stand.
NOTE:  Before  you move  the monitor to  a  new location,  lock the stand  by lowering  monitor until in clicks in to  place.
Removing the Stand