Dell 2009w Users Guide

							 
Notes, Notices, and Cautions  
   
   
   
 
Information in this document is subject to change without notice.  
 
Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell , the  DELL  logo are trademarks of Dell Inc;   Microsoft, Windows,  and  Windows NT  are registered trademarks of Microsoft Corporation;  Adobe  is a 
trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions.  is a registered trademark of the U.S. Environmental Protection Agency. As 
an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
Model 2009W  
January 2008 Rev. A00    About Your Monitor  
Product Features    
Identifying Parts and  Controls  
Monitor Specifications   
Universal Serial Bus (USB) Interface  
Plug and Play Capability  
Maintenance   Guidelines    
Setting Up the Monitor  
Attaching the Stand   
Connecting the Monitor   
Organizing the Cables   
Attaching the Soundbar (Optional)    
Removing the Stand    
Operating the Monitor  
Using the Front Panel Controls   
Using the On - Screen Display (OSD)   
Setting the Optimal Resolution  
Using the Dell Soundbar (Optional)    
Using the Tilt, Swivel, and Vertical Extension   
Rotating the monitor   
Adjusting the Rotation Settings of Your Operating System    Solving Problems  
Troubleshooting Your Monitor  
Common Problems  
Product Specific Problems  
Universal Serial Bus (USB) Specific Problems  
Troubleshooting the Dell™ Soundbar  
    
Appendix  
Safety Instructions    
FCC Notice (U.S. Only) and Other Regulatory Information   
Contacting Dell    
   
NOTE:  A NOTE indicates important information that helps you make better use of your computer. 
NOTICE:  A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 
  CAUTION:  A CAUTION indicates a potential for property damage, personal injury, or death.  
						

							Back to Contents Page    
 
About Your Monitor   
 2009W Fl at Panel Monitor Users Guide  
Product Features  
The  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■  20 - inch (508 mm) viewable area display.   
■  1680 x 1050  resolution, plus full - screen support for lower resolutions.   
■  Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side.   
■  Tilt, swivel, vertical extension and rotate adjustment capabilities.   
■  Removable pedestal and VESA 100 mm mounting holes for flexible mounting solutions.   
■  Plug and play capability if supported by your system.   
■  On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.   
■  Software and documentation CD includes an information file (INF), Image color Matching File (ICM), and product documentation.   
■  Energy Saver feature for Energy Star compliance.   
■  Security lock slot.   
Identifying Parts and Features  
Front View  
    Product Features
Identifying Parts and Controls
Monitor Specifications
Universal Serial Bus (USB) Interface
Plug and Play Capability
Maintenance Guidelines
Front View Front panel controls
Label Description
1 Input Source select
2 OSD Menu/Select button  
						

							   
Back View  
 
   
Side View  
 
                      3 Brightness & Contrast/ Down ( - ) button 
4 Auto - adjust/ Up (+) button
5 Power button (with power light indicator)
Back view Back View with monitor stand
Label Description/Use
1 VESA mounting holes (100mm)  
(Behind attached base plate)   U se to mount the monitor.  
2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
3 Security lock slot Use a security lock with the slot to help secure your monitor.
4 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
5 Regulatory rating label Lists the regulatory approvals.
6 Stand removal button Press to release the stand.
7 Cable management slot   Help organize cables by placing them through the slot.   
8 Lock down/release button Push the monitor down, press the button to unlock the monitor, and then lift the monitor 
to the desired height.
USB 
connectors 
(downstream)
    Right view  
						

							Bottom View    
   
 
Bottom view Bottom view with monitor stand
Label Description
1 AC power cord connector
2 DC power connector for Dell Soundbar
3 DVI connector
4 VGA connector
5 USB upstream port
6 USB downstream ports
Monitor Specifications  
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.   
Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 
Mode *. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling 
of this automatic power saving feature:   
The OSD will only function in the  normal operation  mode. When the  menu  or  plus  buttons are pressed in Active - off mode, one of the following messages will be displayed:
Analog Input In Power Save Mode.  Press Computer Power Button  or Any Key on Keyboard or Move Mouse  
OR   
Digital Input In Power Save Mode.  Press Computer Power Button   or Any Key on Keyboard or Move Mouse  
Activate the computer and the monitor to gain access to the  OSD.  
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.  VESA Modes Horizontal Sync Vertical Sync  Video Power Indicator Power Consumption
Normal operation (with Dell Soundbar and USB active) Active Active Active  Green 70 W (maximum)
Normal operation Active Active Active  Green 42 W (typical)
Active - off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off - - - Off Less than 1 W
NOTE:  This monitor is  ENERGY STAR ® - compliant as well as TCO 99/TCO 03 power management compatible.  
						

							Pin Assignments  
VGA Connector  
 
   
 
 Pin 
Number 15 - pin Side of the Co nnected Signal Cable
1 Video - Red  
2 Video - Green
3 Video - Blue
4 GND
5 Self - test
6 GND - R
7 GND - G
8 GND - B
9 Computer 5V/3.3V
10 GND - sync
11 GND
12 DDC data
13 H - sync
14 V - sync
15 DDC clock
Pin 
Number 24 - pin Side of th e C o nnected  Signal Cable
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating  
						

							9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V/+3.3V power
15 Self test 
16 Hot Plug Detect
17 TMDS RX0 -
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock -  
						

							Universal Serial Bus (USB) Interface  
This section gives you information about the USB ports that are available on the left side of your monitor.  
USB Upstream  C onnector  
   
USB Downstream  C onnector  
   
USB  P orts    
l 1 upstream  -  rear   
l 4 downstream  -  2 on rear; 2 on  left  side  NOTE:  This monitor supports High - Speed Certified USB 2.0 interface
Transfer speed   Data Rate   Power Consumption
High speed  480 Mbps  2.5W (Max., each portyf
Full speed  12 Mbps  2.5W (Max., each portyf
Low speed  1.5 Mbps  2.5W (Max., each portyf
Pin Number 4 - pin Side of 
the connector
1 DMU
2 VCC
3 DPU
4 GND
Pin Number 4 - Pin Side of 
the Signal 
Cable
1 VCC
2 DMD
3 DPD
4 GND
NOTE:  USB 2.0 functionality requires a USB 2.0 - capable computer.
NOTE:  The monitors USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds 
to resume normal functionality.   
						

							Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data 
Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.  Most monitor installations are automatic; you can select different settings if desired. For more 
information about changing the monitor settings, see  Operating the Monitor .  
Flat Panel  Specifications  
*   2009W color gamut (typical) is based on CIE1976 ( 102 %) and CIE1931 (92 %) test standards.    Screen type Active matrix  -  TFT LCD
Screen dimensions 20 inches (20 - inch viewable image size)
Preset display area:  
Horizontal 433.44 mm (17.06 inches)
Vertical 270.90 mm (10.67 inches)
Pixel pitch 0.258 mm
Viewing angle 160° (verticalyfW\S
						

							Back to Contents Page    
 
Appendix   
 
  Safety Instructions  
  FCC Notice (U.S. Only) and Other Regulatory Information   
  Contacting Dell  
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at:  http://www.dell.com/regulatory_compliance .  
Contacting Dell  
For customers in the United States, call 800 - WWW - DELL (800 - 999 - 3355). 
Dell provides several online and telephone - based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues:  
Back to Contents Page    CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 
NOTE:  If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or 
Dell product catalog. 
1. Visit  support.dell.com .
2. Verify your country or region in the Choose  A Country/Region  drop - down menu at the bottom of the page. 
3. Click  Contact Us  on the left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.