Dell 2209wa Users Guide

 
To remove the stand:  
1. Place the monitor on a flat surface.   
2. P ress and hold the Stand release button.    
3. Lift the stand up and away from the monitor.   
Back to Contents Page  
     

Back to Contents Page    
 
Troubleshooting  
 
2209WA  Flat Panel Monitor   
   Self - Test  
   Common Problems  
   Product Specific Problems  
   Universal Serial Bus Specific Problems  
   Dell Soundbar Problems  
Self - Test  
Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly 
connected but the monitor screen remains dark, run the monitor self - test by performing the following steps:   
1....

   
Product Specific Problems  Common Symptoms   What You Experience   Possible Solutions  
No Video/Power LED off No picture l Ensure that the video cable connecting the monitor and the computer is properly 
connected and secure.  
l Verify that the power outlet is functioning properly using any other electrical equipment.  
l Ensure that the power button is depressed fully .    
No Video/Power LED on No picture or no brightness l Increase brightness & contrast controls via OSD.  
l Perform monitor self...

Universal Serial Bus (USB) Specific Problems  
   
 Problems  Screen image is too small Image is centered on screen, 
but does not fill entire viewing 
area l Check the Scaling Ratio setting in Image Setting OSD  
l R eset the monitor to Factory Settings .  
Cannot adjust the monitor with 
the buttons on the front panel OSD does not appear on the 
screen l Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor .   
No Input Signal when user 
controls are pressed No picture,...

Back to Contents Page