Dell Projector 7700 User Manual
Here you can view all the pages of manual Dell Projector 7700 User Manual. The Dell manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
Using Your Projector51 CHANGE PASSWORD—Key in the original password. Then, enter the new password and confirm the new password again. POWER SETTINGS—Select and press to activate power settings. The power settings menu provides the following options:
Page 52
52Using Your Projector QUICK SHUTDOWN—Select On to turn off the projector with a single press of the Power button. This function allows the projector to quickly power off with an accelerated fan speed. Slightly higher acoustic noise is expected during quick power off. NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize. The projector will take a longer time to turn on if you try to power on immediately. Its cooling fan will run at full...
Page 53
Using Your Projector53 PIP SETTINGS—Select and press to activate pip settings. The pip settings menu provides the following options: P ICTURE IN PICTURE—Select On to enable the picture in picture display. Select Off to disable the feature. S ECOND SOURCE—Allows you to select the possible second source is available in the OSD selection depending on the current primary input source. See PIP Combination Sources on page 113. S WAP—Press to swapping the first and second source displays. S IZE—Allows...
Page 54
54Using Your Projector LANGUAGE Allows you to set the language for the OSD. Press to activate the Language menu. HELP If you encounter problems with your projector, you can access the help menu for troubleshooting.
Page 55
Using Your Projector55 Wireless Networking Installation NOTE: Your computer must have the following minimum system requirements: Operating System: •Windows Microsoft Windows XP™ Home or Professional Service pack 2 (32-bit recommended), Windows Vista 32-bit, and Windows ® 7 Home or Professional 32-bit or 64-bit •MAC MacBook and above, MacOS 10.5 and above Minimum Hardware: aIntel Dual Core 1.8 MHz or higher b256 MB of RAM required, 512 MB or more recommended c10 MB of available hard-disk space...
Page 56
56Using Your Projector Enable Wireless on the Projector In order to use your projector wirelessly, you need to complete the steps below: 1 Install the optional wireless dongle. See Installing the Optional Wireless Dongle on page 11. 2Connect the power cable to the wall outlet and press the power button. 3Press the Menu button on your projector control panel or remote control. NOTE: Use , , and buttons to navigate and to select. 4 The wireless connection default is Enabled. See Wireless Settings...
Page 57
Using Your Projector57 The Wireless Guide Screen shown below appears: NOTE: If wireless connection is disabled, then follow these steps to set up: ADVANCED SETTINGS J Wireless Settings J Wireless J Connected. The image input source will be automatically switched to wireless screen when wireless option is selected in this step. 6 Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP ADDRESS . You will need these information to log in later.
Page 58
58Using Your Projector Install the Wireless Application Software on Your Computer 7Connect your computer to the 7700FullHD wireless network. NOTE: • Your computer must have wireless network function to detect the connection. • When you connect to the 7700FullHD wireless network, you will lose wireless connectivity with other wireless networks. NOTE: Remember to turn off all proxies. (In Microsoft® Windows Vista: Click Control Panel J Internet Options J Connections J LAN Settings) 8 Open your...
Page 59
Using Your Projector59 NOTE: If the web page does not load automatically, enter the IP address (default IP address is 192.168.100.10) noted from the projector’s screen in the browser’s address bar. 9 The 7700FullHD Web Management page opens. For first time use, click Download. 10Select the appropriate operating system, then click Download.
Page 60
60Using Your Projector 11Click Run to proceed with the one-time installation of the software. NOTE: You may choose to save the file and install it at a latter time. To do this, click Save. NOTE: If you are unable to install the application because of inadequate rights on the computer, please contact your network administrator. 12 The installation software will launch. Follow the on-screen instructions to complete setup.