DiBoss Lt 40t5lph Instruction Manual

ENGLISH
11
Turning the TV On and OffStandby Setup: The AC power cord must be set up and
connected to have the TV in standby mode ready to be turned
on. Press the ON/OFF button on the side or front panel of the
TV to go into standby mode.
1. If the TV is in standby mode, press the POWER button
on the remote controller or the TV itself to turn the TV on.2. Press the POWER button again on the remote
controller or the TV itself to turn the TV off.
Note: If the TV is on and the POWER button is pressed 
to...

12
On Screen Menus and Display
1. Press the MENUbutton to display main menu. 
2. Press the PRx x
/PRy y
button to select menus-Picture, Sound, Special, Setup.
3. Adjust each menu with the Ï Ïq
q
button.
4. Press the MENUbutton to return to preceding menu.
5. Press the TV/AVbutton to finish adjusting menu.  
▲▼ ◀▶ MENUTV/AV
Main MenuPictureq
Soundq
Specialq
Setupq
▲▼ ◀▶ MENUTV/AV
PictureContrast               90
Brightness            75
Colour                  75
Sharpness            50
▲▼...

ENGLISH
13
Setting up TV Programme
Once you have preset the programme, you will be able to
use the PRx x
/PRy y
or NUMBERbuttons to scan the
programme you programmed.
Programme can be tuned using Auto or Manual
programme menu.
Auto Programme  All programme that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
1. Press the MENU button.
2. Select the Setupmenu.
3. Press the Ï Ïq
q
button to select the Setup menu.
4. Select the Auto...

14
Setting up TV Programme
Manual ProgrammeManual Programme lets you manually tune and arrange
the programme in whatever order you desire. Also you can
assign a programme name with 5 characters to each
programme number.
1. Press theMENUbutton.
2. Select the Setupmenu.
3. Select Manual Programmemenu.
4. Press the PRx x
/PRy y
button to select  System.
5. Select a TV system with the Ï Ïq
q
button.
BG: (West Europe/Asia/M.East/Africa/Australia)
I    :  (UK/Hong Kong/South Africa)
DK: (Russia/China/East...

ENGLISH
15
Setting up TV Programme
Programme  EditThis function enables you to delete, copy, move or skip
the stored programme.
Also you can move some programme to other
programme numbers or insert a blank programme data
into the selected programme number.
1. Press the MENUbutton.
2. Select the Setupmenu.
3. Press the Ï Ïq
q
button to select the Setup menu.
4. 
Press the PRx x
/PRy y
button select Programme  Edit.Select the programme name to edit with the PRx x
/PRy y
and Ï Ïq
q
.
Deleting a programme
1....

16
Picture Control
You can adjust picture Contrast, Brightness, Colour, Sharpness to the levels you
prefer.
Manual Picture Control1. Press the MENUbutton.
2. Select the Picture.
3. 
Press the PRx x
/PRy y
buttons to select a picture item.4. Press the Ï Ïq
q
buttons to adjust the picture condition
as you want.
5. Press the TV/AVbutton to store for the picture User.
PICTURE Effect1. Press the PICTURE(     )button. 
2. Press the PICTURE(     )button repeatedly to      
select Picture effect.
Each press of...

ENGLISH
17
Sound Control
You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programme.
1. Press the MENU button.
2. Select the Soundmenu. 
3. Press the PRx x
/PRy y
button to select the desired
sound item; Equalizer, Balance, AVL Surround or
headphone Volume.
4. Press the Ï Ïq
q
button to make desired adjustment. 
5....

18
Other functions
TV, SCART1, SCART2 and S-VIDEO modes(You can’t set PC mode in this menu. Use the TV/AVbutton) External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), SCART mode is used
for SCART type devices.  
Note: If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENUbutton.
2. Select the Specialmenu.
3. Press the PRx x
/PRy y
button to select Input.
4. Press the Ï Ïq
q
button to select TV, SCART1,...

ENGLISH
19
Other functions
Sleep timerYou don’t have to remember to switch the set off before you
go to sleep. The sleep timer automatically switches the set
to standby after the preset time elapses.
Press the SLEEPbutton to select the number of minutes.
The display will appear on the screen, followed by 0, 10, 20,
30, 60, 90, 120, 180 and 240. The timer begins to count
down from the number of minutes selected.
Note:
a. To view the remaining sleep time, press the SLEEPbutton
once.
b. To cancel the sleep...

20
Other functions
Calling the programme listYou can check the programmes stored in the memory 
by displaying the programme LIST.
Displaying programme list
1. Press the LISTbutton to display the Programme list  
menu. The programme list appears on the screen. 
One programme list contains ten programmes as right.
Note :
a. You may find some blue programmes. 
They have been set up to be skipped by auto 
programming or in the programme edit mode.
b. Some programmes with the channel number 
shown in the...