Digital Projection Projector E-Vision 6800 3D Series User Manual

4INSTALLATION AND QUICK-START GUIDE
4CONNECTION GUIDE
4OPERATING GUIDE
4REMOTE COMMUNICATIONS GUIDE
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AU
TO 
Rev A Januar y 2015 
E-Vision 6800 3D Series
High Brightness Digital Video Projector 
116-281A  

page i
About This Document
Please follow the instructions in this manual carefully to ensure safe a\
nd long-lasting use of the projector.
Keep this manual handy for future reference.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates...

page ii
Introduction
Congratulations on your purchase of this Digital Projection product.
Your projector has the following key features:
• Support for most 3D formats.
• HDBaseT® for transmission of uncompressed High Definition Video up to 100 m from the source.
• Swappable color wheels for high brightness and color critical applicatio\
ns.
• BrilliantColor™ for increased system brightness.
• DynamicBlack™ for improved black levels in dark scenes.
• Independent control of hue, saturation and gain for...

page iii
CONTENTS
INSTALLATION AND QUICK-START GUIDE ..............................1
GETTING TO KNOW THE PROJECTOR ..........................................3
Front and rear views .............................................................................3
Remote control  ......................................................................................3
Control panel and indicators  .................................................................4
CHANGING THE LENS, LAMPS AND COLOR WHEEL...

page iv
Geometry menu ..................................................................................33
Aspect Ratio .......................................................................................33
H Keystone and V Keystone ...................................................................34
Overscan ...........................................................................................36
3D...

 
   
Digital Projection E-Vision 6800 3D Series 
This page is intentionally left blank.  

INSTALLATION AND QUICK-START GUIDE4
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AU
TO 
Rev A Januar y 2015 
E-Vision 6800 3D Series
High Brightness Digital Video Projector  

Installation and Quick-Start Guide
IN THIS GUIDE
IN THIS GUIDE
Getting To Know The Projector......................................................................3
Front and rear views ...................................................................................................3
Remote control ............................................................................................................3
Control panel and indicators...

page 3
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Getting To Know The Projector
Front and rear views
Notes
 The projector uses an infra-red 
remote control.
  Some of the controls are duplicated 
on the projector control panel, as 
shown on the next page.
	 The	air	filters	should	be	cleaned	or	
changed regularly, depending on the 
installation environment.
	 The	filters	should	be	changed	at	the	
same time as the lamp is changed.
 The projector lens is shipped 
separately.Lens...

page 4
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Control panel and indicators
Some of the controls from the remote control are duplicated on the proje\
ctor control panel, as shown 
on the right.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC buttons on 
the remote control.
The Power indicator will show amber when in standby and green when the projector \
is on, and will 
flash when the projector is warming up or cooling down.
The Warning indicator...