Home
>
Digital Projection
>
Projector
>
Digital Projection Projector HIGHlite Laser 3D Series User Manual
Digital Projection Projector HIGHlite Laser 3D Series User Manual
Have a look at the manual Digital Projection Projector HIGHlite Laser 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 132
page 124
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Gamma
A nonlinear operation used to code and decode luminance. It originates from the Cathode Ray Tube technology used in legacy television
sets.
Ghosting
An artifact in 3D image viewing. Ghosting occurs when an image intended \
for one eye is partially seen by the other eye.
Ghosting can be removed by optimizing the dark time and sync delay.
HDCP (High-bandwidth Digital Content Protection)
An encryption scheme used to protect video content.
HDTV...](http://img.usermanuals.tech/thumb/5761/99755/w64_projector_manual_8678_d-131.png "Page 132
page 124
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Gamma
A nonlinear operation used to code and decode luminance. It originates from the Cathode Ray Tube technology used in legacy television
sets.
Ghosting
An artifact in 3D image viewing. Ghosting occurs when an image intended \
for one eye is partially seen by the other eye.
Ghosting can be removed by optimizing the dark time and sync delay.
HDCP (High-bandwidth Digital Content Protection)
An encryption scheme used to protect video content.
HDTV...")
![Page 133
page 125
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Interlacing
A method of updating the image. The screen is divided in two fields, one containing every odd horizontal line, the other one containing the\
even lines. The fields are then alternately updated. In analog TV interlacing was commonly used as a way of doubling the refresh rate without
consuming extra bandwidth.
Interleaving
The alternation between left and right eye images when displaying 3D.
LED (Light Emitting Diode)
An electronic...](http://img.usermanuals.tech/thumb/5761/99755/w64_projector_manual_8678_d-132.png "Page 133
page 125
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Interlacing
A method of updating the image. The screen is divided in two fields, one containing every odd horizontal line, the other one containing the\
even lines. The fields are then alternately updated. In analog TV interlacing was commonly used as a way of doubling the refresh rate without
consuming extra bandwidth.
Interleaving
The alternation between left and right eye images when displaying 3D.
LED (Light Emitting Diode)
An electronic...")
![Page 134
page 126
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
OSD (on-screen display)
The projector menus allowing you to adjust various settings.
Overlapping region
See blend region.
PAL (Phase Alternate Line)
The television system used in the UK, Australia and other countries - 625 lines transmitted at 50 interlaced fields per second.
Pillarboxing
Black margins at the left and right of the image. Pillarboxing appears w\
hen a narrower image is packed into a wider frame without changing
the aspect ratio....](http://img.usermanuals.tech/thumb/5761/99755/w64_projector_manual_8678_d-133.png "Page 134
page 126
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
OSD (on-screen display)
The projector menus allowing you to adjust various settings.
Overlapping region
See blend region.
PAL (Phase Alternate Line)
The television system used in the UK, Australia and other countries - 625 lines transmitted at 50 interlaced fields per second.
Pillarboxing
Black margins at the left and right of the image. Pillarboxing appears w\
hen a narrower image is packed into a wider frame without changing
the aspect ratio....")
![Page 136
page 128
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Synchronization
A timing signal used to coordinate an action.
Test pattern
A still image specially prepared for testing a projection system. It may \
contain various combinations of colors, lines and geometric shapes.
TheaterScope
An aspect ratio used in conjunction with a special anamorphic lens to display 2.35:1 images packed into a 16:9 frame.
Throw distance
The distance between the screen and the projector.
Throw ratio
The ratio of the throw...](http://img.usermanuals.tech/thumb/5761/99755/w64_projector_manual_8678_d-135.png "Page 136
page 128
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Synchronization
A timing signal used to coordinate an action.
Test pattern
A still image specially prepared for testing a projection system. It may \
contain various combinations of colors, lines and geometric shapes.
TheaterScope
An aspect ratio used in conjunction with a special anamorphic lens to display 2.35:1 images packed into a 16:9 frame.
Throw distance
The distance between the screen and the projector.
Throw ratio
The ratio of the throw...")
![Page 137
page 129
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Vertical Scan Rate
The rate at which the frames of the incoming signal are refreshed. The rate is set by the vertical synchronization from the source and
measured in Hertz.
Vignetting
Optical cropping of the image caused by the components in the projection\
lens. This can happen if too much offset is applied when
positioning the image using the lens mount.
Vista
An aspect ratio of 1.66:1.
WUXGA
A display resolution of 1920 x 1200 pixels with a...](http://img.usermanuals.tech/thumb/5761/99755/w64_projector_manual_8678_d-136.png "Page 137
page 129
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Vertical Scan Rate
The rate at which the frames of the incoming signal are refreshed. The rate is set by the vertical synchronization from the source and
measured in Hertz.
Vignetting
Optical cropping of the image caused by the components in the projection\
lens. This can happen if too much offset is applied when
positioning the image using the lens mount.
Vista
An aspect ratio of 1.66:1.
WUXGA
A display resolution of 1920 x 1200 pixels with a...")
page 133 Reference Guide TECHNICAL SPECIFICATIONS Electrical and physical specifications • Power requirements200-240 VAC, 50-60 Hz (single phase) • Power Consumption1600 W • Thermal Dissipation5027 BTU/hr • Fan Noise48 dBA • Operating Temperature0°C to 35°C (32 to 95F) • Storage Temperature-20°C to 60°C (-4 to 140F) • Operating Humidity20% to 90% non-condensing • Weight46.5 kg (102.5 lbs) • DimensionsH: 29.0 cm W: 55.2 cm L: 67.0 cm (88.7 cm with lens hood) H: 11.4 in W: 21.7 in L: 26.4 in (34.9 in with lens hood) Safety & EMC regulations • CE, FCC Class A, UL, CCC Notes Digital Projection HIGHlite Laser 3D Series Rev C Februar y 2015
Digital Projection Limited Greenside Way, Middleton Manchester M24 1XX, UK Registered in England No. 2207264 Registered Office: as above Tel (+44) 161 947 3300 Fax (+44) 161 684 7674 [email protected] [email protected] www.digitalprojection.co.uk Digital Projection Inc. 55 Chastain Road, Suite 115 Kennesaw, GA 30144, USA Tel (+1) 770 420 1350 Fax (+1) 770 420 1360 [email protected] www.digitalprojection.com Digital Projection China 中国 北京市 朝阳区 芍药居北里101号 世奥国际中心A座2006室(100029) Rm A2006 ShaoYaoJu 101 North Lane Shi Ao International Center Chaoyang District Beijing 100029, PR CHINA Tel (+86) 10 84888566 Fax (+86) 10 84888566-805 [email protected] www.dp-china.com.cn Digital Projection Asia 16 New Industrial Road #02-10 Hudson Technocentre Singapore 536204 Tel (+65) 6284-1138 Fax (+65) 6284-1238 www.digitalprojectionasia.com 114-913C HIGHlite Laser 3D Series User Manual Contact Information: