Dream Vision Dreambee 2 Pro Full HD 1080p Projector Specifications

							
DREAMBEE 2 - FULL HD 1080P PROJECTOR WITH HDMI 1.3
The DreamBee 2 is the finest DreamVision  Full HD projector that integrates the latest 
technologies available on the market. The native resolution of 1920x1080, the unchallenged 
30  000:1  contrast  ratio,  the  two    HDMI  1.3  inputs  and  the  Cine-Motion  compatibility 
(1080p24Hz) among others, make the 
DreamBee 2 a projector of exception.
             DREAMBEE 2
        • 3x 0.7’’ LCOS panels
       • Full-HD Resolution 1920x1080 pixels
            • 30 000:1 Contrast Ratio
       • DreamVision Optimized Calibration
   • Home Automation friendly (RS232)
 • Video Compatibility up to 1080p-24 HDTV
• Full-glass Optical Engine
• Motorized zoom and focus
 • +/- 80% vertical, +/- 34% horizontal Lens shift
   • Optical zoom 2x (1.4-2.8:1 throw ratio)
       • 2x HDMI 1.3 inputs
           • Compatible with the 2.35 Theatre System Kit 
           • Silent working noise (< 21 dB)
     • Designed in Paris, France
When  renowned  French  designer  Pineau  Le  Porcher 
collaborated  with  Parisian  company 
DreamVision,  it  was 
sure  to  be  a  match  made  in  creative  heaven.  The  result  ?
 
This  curvaceous  Full-HD  projector  that  looks  like  a 
contemporary  work-of-art.  Available  in  a  rainbow  of  high-
gloss colours, the  DreamBee 2 will be a respectful element 
of your interior decoration.
www.dreamvision.net
When Fashion meets Performances
DreamBee  2  combines  a  daringly  distinctive  chassis 
with  uncompromising  LCoS  technology  electronics  and 
impressive Full-HD specifications. The new 
full-glass 
elements  Lens   delivers  a  jaw-dropping  picture 
that is as much highly contrasted as it is relaxed, 
natural and inviting to the eye.
The  more  demanding  videophile,  meanwhile, 
can  opt  for  the  advanced  picture  control  and 
processing of the DreamBee 2 PRO package.
Whereas  the  true  Cinemascope®  fanatics  will 
definitely  praise  the  DreamBee  2  Deluxe 
that 
comes  equipped  with  the  DreamScaler  4,  a  high 
quality  video  processor  revealing  advanced  calibration 
tools  and  a  full  compatibility  with  the  DreamVision
 
2.35 THEATRE System. 
						

							
             DREAMBEE 2
        • 3x 0.7’’ LCOS panels
       • Full-HD Resolution 1920x1080 pixels
            • 30 000:1 Contrast Ratio
       • DreamVision Optimized Calibration
   • Home Automation friendly (RS232)
 • Video Compatibility up to 1080p-24 HDTV
• Full-glass Optical Engine
• Motorized zoom and focus
 • +/- 80% vertical, +/- 34% horizontal Lens shift
   • Optical zoom 2x (1.4-2.8:1 throw ratio)
       • 2x HDMI 1.3 inputs
           • Compatible with the 2.35 Theatre System Kit 
           • Silent working noise (< 21 dB)
     • Designed in Paris, France
Install it in a snap
The input panel is dissimulated at the back of the projector and 
offers  a  wide  connectivity  for  an  easier  install.  Thanks  to  the 
new motorized  Zoom  and  Focus ,  the optical  adjustments 
are  fast  and  accurate .  The  large  vertical  and  horizontal  lens 
shift will accommodate the most constraining setups.
H I G H - E N D PacksDreamBee 2 PRODreamBee 2 Deluxe
ProjectorDreamBee 2Dreambee 2
External ScalerDreamScaler 3DreamScaler 4
E x t e n d e d 
Inputs4x HDMI rev 1.21x Analog 5-BNC2x Component
2x S-Video
2x Video
4x HDMI rev 1.31x Analog 5-BNC2x Component
2x S-Video
2x Video
Optional Inputs SD-SDI Dual HD-SDI
E x t e n d e d 
Outputs1x Analog 5-BNC
1x Digital Audio
1x Coaxial Audio 1x Analog 5-BNC
1x Digital Audio
1x Coaxial Audio
2x 12V Triggers
H o m e c i n e m a 
V i d e o 
Processing
PREP™Deinterlacing
Progressive Cadence
Right RatePREP™Deinterlacing
Progressive Cadence
Right Rate
Mosquito NoiseFine DetailEdge Enhancement R2Ambiance ModeTheatre Mode R2
Theatre Mode No Yes
2.35  THEATRE 
System Require 12V Trigger inputCompatible
SPECIFICATIONSDescription
Panel Technology
LCoS
ResolutionFull-HD (1080p)
Screen Size (16:9)60” - 240” diag.
Contrast30 000:1
Color System3-Chip® SystemColorSelect™ Filters
Video ProcessingGXP Gennum
OpticsFull-glass Fujinon
Full-HD Motorized
Throw Ratio1.4:1 - 2.8:1
Screen OffsetOptical Shift
+/- 80% vertically
+/- 34% horizontally
Weight11 Kg
D i m e n s i o n s 
(WxDxH)58 x 47 x 20cm23 x 18 x 8 inches
RS-232 Yes
Inputs2x HDMI 1.31x Component
1x S-Video
1x Video
V i d e o 
Compatibility TV: 480i up to 1080p
PC: VGA to SXGA
C i n e - M o t i o n 
(1080p24) Yes
www.dreamvision.net
434 mm
17”
55 mm - 2.2”
263 mm10.4”
DreamBee  2  PRO  and Deluxe 
DreamScaler dimensions
585 mm
23.0”
470 mm18.5”
205 mm
 8.0”
DIMENSIONS 
The small details that make the difference
Each  unit  is  double  checked  and  calibrated  by  our  20-years 
experienced  video  engineer  in  order  to  obtain  a  perfect  picture 
quality  and  finish. 
DreamVision  also  chose  the  most  advanced 
manufacturing  process  and  luxurious  materials  such  as  ABS-PC 
also used in aeronautic for its extreme rigidity and performance in 
heat and noise absorption.gold ring available for Midnight model. 
						

							HP Part No. 5961-0509
Printed in USA
First Edition - October 1992
PCL 5 Printer LanguageTechnical 
Reference Manual 
						

							ii    EN
Notice
This document contains proprietary information which is protected by 
copyright. All rights are reserved. No part of this document may be 
photocopied, reproduced, or translated to another language without 
the prior written consent of Hewlett-Packard Company. The 
information contained in this document is subject to change without 
notice. 
						

							EN iii
Printing History 
This manual was created using HP Tag/Vectra software on an 
HP Vectra Personal Computer. The body text is printed in Helvetica 
fonts. The camera-ready copy was printed on an HP LaserJet IIISi 
printer with Resolution Enhancement technology (REt) and was then 
reproduced using standard offset printing.
First Edition – October 1992
NOTICE
This document is the current edition of the technical reference manual for PCL 
5 and earlier printers. It replaces the September 1990 edition of the HP PCL 5 
Printer Language Technical Reference Manual (p/n 33459-90903). If you have 
ordered another PCL Technical Reference document, this manual and the PCL 
5 Comparison Guide are the updated replacement documents. 
						

							iv    EN
Trademark Credits
Intellifont and Garth Graphic are U.S. registered trademarks of Agfa 
Division, Miles Inc. CG Triumvirate and Shannon are trademarks of 
Agfa Division, Miles Inc. CG Bodoni, CG Century Schoolbook, CG 
Goudy Old Style, CG Melliza, Microstyle, CG Omega, CG Palacio, 
CG Times and CG Trump Mediaeval are products of Agfa Division, 
Miles Inc. CG Times, a product of Agfa Division, Miles Inc., is based 
on Times New Roman, a U.S. registered trademark of Monotype 
Corporation plc. PCL, and Ve c t r a are U.S. registered trademarks of 
Hewlett-Packard Company. Resolution Enhancement is a trademark 
of Hewlett-Packard Company. IBM is a registered trademark of 
International Business Machines Corporation. Microsoft, Windows, 
and MS-DOS are U.S. registered trademarks of Microsoft 
Corporation. TrueType and Macintosh are registered trademarks of 
Apple Computer, Inc. Post Scr ip t is a registered trademark of Adobe 
Systems, Inc. Centronics is a U.S. registered trademark of Centronics 
Corporation. ITC Avant Garde Gothic, ITC Benguiat, ITC Bookman, 
ITC Cheltenham, ITC Galliard, ITC Korinna, ITC Lubalin Graph, ITC 
Souvenir, ITC Zapf Chancery and ITC Zapf Dingbats are U.S. 
registered trademarks of International Typeface Corporation. ITC 
Tiffany is a trademark of International Typeface Corporation. Futura is 
a U.S. registered trademark of Fundicion Tipografica Neufville, S.A. 
Serifa is a trademark of Fundicion Tipografica Neufville, S.A. Letraset 
is a registered trademark of Esselte Pendaflex Corporation. Revue 
and University Roman are trademarks of Esselte Pendaflex 
Corporation. Helvetica and Times Roman are trademarks of Linotype 
AG and its subsidiaries. Univers is a U.S. registered trademark of 
Linotype AG and its subsidiaries. Antique Olive is a trademark of 
Monsieur Marcel OLIVE. Arial and Gill Sans are registered 
trademarks of The Monotype Corporation plc. 
						

							EN v
Inside This Manual 
What You Can Learn From This Manual 
Hewlett-Packard has developed a standard set of printer features for 
use in all HP printers. Printer features are accessed through the 
corresponding commands of Hewlett-Packard’s PCL language. This 
manual describes the PCL 5 printer language. This includes 
descriptions of the commands available for Hewlett-Packard PCL 5 
LaserJet printers and the basic requirements of PCL language 
programming. With the release of new LaserJet family printers there 
are new features added which supplement the existing PCL base set. 
Features of future printer releases are not covered in this document. 
The new features are described in the latest version of the PCL 5 
Comparison Guide. Programmers should familiarize themselves with 
the information provided in the PCL 5 Comparison Guide in addition 
to the information in this document.
Experienced Users 
This manual was written for people with some programming 
experience. Many of the concept discussions assume some 
programming knowledge.
When writing a PCL language program, you should know the PCL 
language concepts and commands presented in this manual, and 
should be aware of the differences in implementation of the PCL 5 
printer language for the various HP LaserJet printers, as described in 
the PCL 5 Comparison Guide.
Non-technical Users 
Many software applications (word processing software, spreadsheets, 
etc.) allow you to embed printer commands as escape sequences in 
the body of your documents. This manual presents the full syntax and 
explanation of all the commands supported by PCL 5 LaserJet 
printers. These commands enable you to take advantage of the 
LaserJet printer’s advanced feature set. 
						

							vi    EN
NoteSince actual implementation of printer commands within software 
applications varies from package to package, specific examples are 
not given. For examples of printer command usage with many popular 
software packages, refer to HP’s Software Application Notes, 
provided with the printer. The most current versions of software 
application notes can be obtained through the HP Forum on 
CompuServe, by fax using the HP FIRST fax service, or through 
HP’s literature distribution. Refer to Appendix A for more information. 
Chapter Summaries 
A brief description of each chapter is provided below.
Chapter 1 - Introduction to HP PCL
This chapter gives a brief history of the development of the PCL 
language, describes the PCL language levels (architecture), and 
describes the PCL command structure (control codes and escape 
sequences).
Chapter 2 -  The Page
This chapter introduces the idea of the logical page and identifies the 
area in which printing can occur. It also describes the PCL coordinate 
system and the HP-GL/2 picture frame.
Chapter 3 - The Print Environment 
This chapter introduces the printer’s feature settings, collectively, as 
the print environment. It includes descriptions of the factory default 
environment, user default environment, and the modified print 
environment. The effect of printer reset functions is also described.
Chapter 4 - PCL Job Control Commands 
This chapter describes the commands which provide job control. 
Job control commands are usually grouped together and sent at the 
beginning of a job. Job control includes restoration of the User Default 
Environment, selection of the number of copies of each page to be 
printed, duplex print commands, and unit of measure specification. 
						

							EN vii
Chapter 5 - Page Control Commands 
This chapter describes the commands providing page format control. 
Page format control allows you to select the page source, size, 
orientation, margins, and text spacing.
Chapter 6 - Cursor Positioning 
This chapter describes how to position the cursor within the logical 
page.
Chapter 7 - Fonts
This chapter describes basic font information including font 
characteristics.
Chapter 8 - PCL Font Selection 
This chapter describes how to select a font for printing using the font 
characteristics commands. The underline feature is described at the 
end of the chapter.
Chapter 9 - Font Management 
This chapter describes font management which provides 
mechanisms for downloading and manipulating soft fonts.
Chapter 10 - User-Defined Symbol Sets
This chapter describes the capability of some PCL 5 printers to 
enable users to define their own symbol sets for special needs.
Chapter 11 - Soft Font Creation 
This chapter describes how to organize font/character data for 
downloading to the printer. 
Chapter 12 - Macros 
This chapter describes macro commands which store a block of PCL 
commands and data which can be used repeatedly without redefining 
the block. The macro function reduces the number of commands that 
must be sent to the printer.  
						

							viii    EN
Chapter 13 - The PCL Print Model 
This chapter describes the PCL print model which allows for special 
effects when printing. 
Chapter 14 - PCL Rectangular Area Fill Graphics 
This chapter describes how to define and fill a rectangular area with 
one of the predefined PCL patterns, or with a user-defined pattern. 
Chapter 15 - Raster Graphics 
This chapter describes how to download raster graphics to the printer, 
and includes various techniques for reducing the amount of data 
needed to define the raster image.
Chapter 16 - Status Readback 
This chapter describes the PCL status readback features. Status 
readback enables you to obtain PCL status information from the 
printer, such as: available printer (user) memory, a list of fonts and 
symbol sets, and the ID numbers of macros and user-defined 
patterns.
Chapter 17 - An Introduction to HP-GL/2 Vector 
Graphics 
This chapter introduces basic information for HP-GL/2. It lists the 
vector graphics commands, and describes the HP-GL/2 command 
syntax. An overview of several important topics is also provided, such 
as the PCL Picture Frame concept, scaling, pen status and location, 
and absolute vs. relative pen movement. 
Chapter 18 - The Picture Frame 
This chapter describes how to set up an area on the page for printing 
vector graphics (the PCL Picture Frame). It discuses the commands 
necessary to define and position the picture frame, along with the 
commands used to enter and exit HP-GL/2 mode.