Dream Vision Dreambee User Manual

5.0  GETTING STARTED
R699740 - DreamBee User Manual 21 
5.5 Operating and Navigation Buttons
ButtonDescription
EnterTo select or confirm.
Up - down - left - rightTo navigate into Menu.
Switch On/OffTo turn On or Off the projector.
InputTo switch the input selection.
HideTo hide temporary the picture.
ExitTo return to previous menu or cancel action.
MenuTo display On Screen Display (OSD) Menu.
Enter
Up - down - left - right
Switch On/Off
Input
Hide
Exit
Menu 

6.0  CONNECTIONS
22R699740 - DreamBee User Manual
6.0 CONNECTIONS
The DreamBee can be connected to any compatible devices. The available inputs are:
•2x HDMI revision 1.2 with HDCP
• 1x S-Video (or Composite)
• 1x Video
• 1x Component (YCbCr or YPbPr or RGB or SCART with adapter)
The RS-232C terminal can be used for automation or software updates.
During the connection, make sure that the unit is powered OFF.
F or audio output, connect your audio video source to an amplifier.
6.1 The DreamBee PRO...

6.0  CONNECTIONS
R699740 - DreamBee User Manual 23 
6.3 Connecting a device with S-Video Output
6.4 Connecting a device with Video Output
6.5 Connecting a device with Component Output
Audio Video  Source:
D VD-Player
Multimedia Box
D VB-T Television receiver
Game Console (SD output)
Video Camera
S-Video output
Digital Camera
A
udio Video  Source:
D VD-Player
Multimedia Box
D VB-T Television receiver
Game Console (SD output)
Video Camera
Video output
Digital Camera
A
udio Video  Source:
D VD-Player
HDTV...

6.0  CONNECTIONS
24R699740 - DreamBee User Manual
6.6 Connecting a device with SCART Output (European market)
6.7 Automation and control port: RS-232 Input.
You must configure in the DreamBee’s Menu the Component Input to ‘SCART’. Making so will configure the
Video Input as Sync. Input. See “COMP”,  page 30 for more details.
*USING RS-232C WITH A COMPUTER
The RS-232 Control and Automation may require specific softwares and tools. See “RS-232C input”,  page 38 for
more details on RS-232C cabling and...

7.0  MENU AND PICTURE SETTING
R699740 - DreamBee User Manual 25 
7.0 MENU AND PICTURE SETTING
7.1 How to start up the Menu
Box like Menu Structure
The menu structure is built up with boxes which allow easy access to different parameters for setting up the
projector. A menu box item can generate an adjustment box on the right of the main menu.
How to activate the Menu Structure
•Press the [MENU] on the RCU or Digital Control Panel located at the rear side of the projector.
• The main menu will be...

7.0  MENU AND PICTURE SETTING
26R699740 - DreamBee User Manual
7.2 Menu Structure
MAIN MENUSUBMENUAVAILABLE OPTIONS
ImageImage AdjustContrast -30 +30
Brightness -30 +30
Color -30 +30
Tint (for NTSC sources) -30 +30
Sharpness -30 +30
DNR (Digital Noise Reduction)
-30 +30
Color Temp.Presets: Low, Middle, High
User 1Red -255 to 0
Green -255 to 0
Blue -255 to 0
User 2Red -255 to 0
Green -255 to 0
Blue -255 to 0
GammaNormal, A, B, C
OffsetRed  -30 +30
Green -30 +30
Blue -30 +30
Pixel AdjustHoriz. Red 1 to 7...

7.0  MENU AND PICTURE SETTING
R699740 - DreamBee User Manual 27 
VideoCOMP
(for Component Input)Y PbCb/PrCr
RGB
SCART
HDMI
(for HDMI 1 and HDMI 2 Inputs)Auto (Autodetect the HDMI color space)
YCbCr (4:4:4)
YCbCr (4:2:2)
RGB
Aspect
(fixed to 16:9 for HD pictures)4:3
16:9
Zoom
Film ModeA uto
Off
Color System
(for Video or S-Video Inputs)A uto, NTSC, NTSC4.43, PAL, PAL-M, PAL-
N, SECAM
Black Level
(for NTSC sources)0%, 7.5%
InstallMenu PositionUpper Left
Upper Center
Upper Right
Left Center
Center
Right...

7.0  MENU AND PICTURE SETTING
28R699740 - DreamBee User Manual
7.3 Image Menu
Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A
correct contrast setting is important for good image reproduction. Adjust the Contrast value between -30 and +30.
Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between -30 and +30.
MENU 
⇒⇒ ⇒
⇒ Image ⇒ ⇒
⇒
⇒ Image Adjust ⇒ ⇒
⇒
⇒ Brightness
Color...

7.0  MENU AND PICTURE SETTING
R699740 - DreamBee User Manual 29 
Gamma
Gamma is the relationship between the color values of the data and the color values displayed. The Gamma
coefficient makes it possible to adjust the brightness of the midtones only without affecting the very bright and very
dark areas. If gamma is set too high, middle tones appear too dark. If it's set too low, middle tones appear too light.
The Gamma correction factor can be set to Normal, A, B or C.
MENU 
⇒⇒ ⇒
⇒ Image ⇒ ⇒
⇒
⇒...

7.0  MENU AND PICTURE SETTING
30R699740 - DreamBee User Manual
Mask
The Mask function is used to hide the outer area of the picture. Adjust the Mask value between 0%, 2,5% and 5%.
MENU 
⇒⇒ ⇒
⇒ Setup ⇒ ⇒
⇒
⇒ Mask ⇒ ⇒
⇒
⇒ Off, 2,5% or 5%
7.5 Custom Image Profile
Y ou can adjust the projected image to a desired image quality and save the adjusted values into the Image profile
Menu. Besides the default “Cinema”, “Natural” and “Dynamic” settings, there are 3 more types of user-defined
settings for image...