Dukane Imagepro 8038 User Guide

 10LCD Projector User Guide  Distance                            Width x Height                                  Diagonal
  3 (.9 m)               13~17 x 10~13 (.33~.43 x .25~.33 m)            16~21 (.4~.5 m)
  5 (1.5 m)             22~28x 16~19 (.55~.71 x .41~.48 m)             27~35 (.7~.9 m)
  6.5 (2.0 m)          29~38x 22~28 (.74~.97 x .56~.71 m)             36~47 (.9~1.2 m)
  8 (2.4 m)             34~46x 26~32 (.86~1.2 x .66~.81 m)             43~57 (1.1~1.5 m)
  9 (2.8 m)             41~54x 31~40...

 11Using Image Manager
With one click, Image Manager lets you choose the best image settings for
your presentation type.
Important:The Image Manager settings work best if you select Reset from the
Adjust tab each time before selecting an Image Manager setting.
1. Press Menu and use the Adjust + - buttons to move to the tab.
2. Press Next to move to the appropriate Image Manager feature.
3. Press Enter to select that feature.
4. Press Menu to dismiss the menu or wait for the menu to close
(about 15...

 12LCD Projector User Guide
Adjusting the Display and Volume
The features available on the Adjust tab depend on your image source.Note: We recommend using the Image Manager to optimize the display.
Then, if further adjustments are needed, use the brightness and contrast
settings on the Adjust tab.
1. Press Menu and use the Adjust + - buttons to move to the Adjust tab.
2. Use the Next button to move to the feature that you want to adjust.
3. Use the Adjust + - buttons to move the slider bars. If you wish...

 13Setting Up the Image Source
The features that are available on the Setup tab depend on the type of image
source that you are using.
1. Press Menu and use the Adjust + - buttons to go to the Setup tab.
2. Use the Next button to select a feature.
3. Use the Adjust + - buttons to select an option for the selected feature.
    If you wish to return to the factory default settings, use Next to highlight
Reset and press Enter.
Source options are computer, video and S-video. When you change sources, a
source...

 14LCD Projector User Guide
Projection options are front, rear and ceiling.
• Front projection is used for projecting straight ahead onto a screen.
• Rear projection reverses the image if you wish to project from behind the
screen.
• Use ceiling projection when you attach the projector to a permanent ceiling
bracket.
H Position and V Position adjustments are available only for images from a
computer.
Adjust Frequency and Tracking of images from a computer until the image is
evenly spaced, fuzzy vertical...

 15Checking the Status
The information displayed on the Status tab depends on the type of image
source you use.
The Reset Lamp Hours feature is the only item that can be adjusted on this
screen. Refer to the Lamp Hours Used when you want to know how much
longer your lamp will last. Estimated lamp life expectancy is 2,000 to 4,000
hours.
Important:Only reset the lamp hours after you have installed a new lamp.
To reset lamp hours
1. Press Menu and use the Adjust + - buttons to go to the Status tab.
2....

 16LCD Projector User GuideTransporting the Projector
When you place the projector in the carrying case make sure the lens is
positioned inside the lens notch of the foam insert. Secure the projector with
the velcro strap.
Important:The carrying case provided with the projector is not designed to be
checked through baggage. If you can not hand carry this projector make sure
it is packed properly to prevent damage. The warranty does not cover damage
from improper handling.Velcro StrapLens NotchFoam...

 17Maintenance
Changing the Lamp Module
Important:The lamp in the LCD Digital Projector  contains trace amounts of
mercury. Some governments require special disposal of lamps containing
mercury. Dispose of lamps in accordance with the law and any applicable local
regulations.
The lamp module should be replaced with a certified replacement part. To
order a new lamp, contact your local dealer.
After you have changed the lamp module, make sure that you reset the lamp
counter. See “To reset lamp hours” on...

 18LCD Projector User Guide
5. Loosen the two slotted screws on the lamp module bracket.
6. Gently lift and pull up on the metal wire to remove the lamp module.
Caution: Do not touch the glass portion of the new lamp module with
your hands or allow it to touch other objects as this may damage it and
shorten its operational life.
Caution: Do not drop the lamp module as the glass may shatter and
cause injury.
7. Carefully place the new lamp module into the projector, with the glass
portion facing left....

 19Cleaning the Exterior Case
1. Turn off the projector and allow it to cool.
2. To remove dirt or dust, gently wipe the exterior case with a soft, dry, lint-free
cloth.
3. To remove stubborn dirt or stains, moisten a soft cloth with water and a
neutral detergent and gently wipe the exterior case.
Caution: Do not use alcohol, benzene, thinner or other chemical cleaners
which may fade, deform or melt the exterior case. Do not apply the
detergent solution to the projector lens as it may scratch the lens....