Dukane Imagepro Software Utility Installation Guide

							Software Utility Installation Guide


 Dynamic Image Utility 2.0

 Viewer PPT Converter 2.0

 Image Express Utility 1.0
Contents, Based on Edition 3, Jan, 2004
Be sure to read this before installing and using the accompanying software.
(End User LIicense Agreement)------1
1. Introduction----------------------------------------------------------------3
• Contents of the Supplied CD-ROM-----------------------------3
• What Can Be Accomplished with the Supplied Software-----3
• Projetor “Easy Connection” Settings----------------------------5
• Supported Projectors---------------------------------------------5
• Operating Environment-------------------------------------------6
2. Equipment Connections and Settings----------------------------7
• When Using a Network Environment----------------------------7
• When Making Connections with Serial Cable------------------8
3. Software Installation----------------------------------------------------9
• Installation----------------------------------------------------------9
• Uninstalling-------------------------------------------------------10
4. Starting/Exiting the Software---------------------------------------11
• Dynamic Image Utility 2.0--------------------------------------11
• Viewer PPT Converter 2.0--------------------------------------12
• Image Express Utility 1.0---------------------------------------13
5. Troubleshooting---------------------------------------------------------14
Please see the Help functions of the software
programs for information about their
functions and operation. 
						

							NOTE:
(1) The contents of this guide may not be reprinted in part or whole without permission.
(2) The contents of this guide are subject to change without notice.
(3) Great care has been taken in the creation of this guide; however, should any questionablepoints, errors, or omissions be apparent, please contact us.
(4) Notwithstanding Section (3), this company will not be responsible for any claims of loss or profit or other matters deemed to be the result of using this unit.
(5) Guides with incorrect collating or missing pages will be replaced. • IBM and PC/AT are registered trademarks of International Business Machines Corporation.
• Microsoft, Windows, PowerPoint, MS-DOS and Direct X are registered trademarks or trade-
marks of Microsoft Corporation in the U.S.A. and other countries.
• Other manufacturers names and trademark names appearing in this guide are registered
trademarks or trademarks of the respective companies.
To  Our Customers
When using the Projector in a network environment,
please be sure to perform the various settings
according to the instructions of the network
administrator. 
						

							
 END USER LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (LICENSE) CAREFULLY BEFORE
INSTALLING THE SOFTWARE. IT PROVIDES THE TERMS OF THIS LICENSE.
WHILE INSTALLING THE SOFTWARE, THIS SOFTWARE LICENSE AGREEMENT WILL BE DIS-
PLAYED. BY CLICKING ON THE Yes BUTTON, YOU ARE CONSENTING TO BE BOUND BY
THIS AGREEMENT. FOLLOW THE DIRECTIONS ON THE SCREEN AND COMPLETE THE IN-
STALLATION PROCESS.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, CLICK THE No
BUTTON. THE INSTALLATION PROCESS WILL NOT CONTINUE.
Dukane  grants you (User) a license to use the  DUKANE PROJECTOR  USER SUPPORTWARE
(Softwa re) p rovided with this End User License Ag reement (EULA).
User assumes responsibility for the selection, adoption use and the result of use of the Software
to achieve its intended result.
1. Term
1) EULA will become effective upon Users agreement to the terms of EULA  and shall remain
in force until User terminates it by returning or destroying the Software and its related docu-
ments.
2) Notwithstanding the foregoing NECVT may terminate EULA at any time upon User failing to abide by any terms of EULA. Upon the termination of the EULA by NECVT, the license
granted to User shall be terminated automatically. User agrees to destroy the Software to-
gether with all copies of it upon such termination.
2. License
User use the Softwa re on personal computers only for operating  Dukanes projector sup-
plied with the Softwa re or other p rojector to be specified by  Dukane (Projector)
3. Replication, modification and merger of the Software
1) User may make copies of the Software and related documentation to the extent necessary
for using the P rojecto r. 
2) User may not use, copy, modify, or otherwise dispose of the Software, except as expressly permitted in EULA.
3) No provision in EULA shall be construed to assign and/or transfer any intelle\
ctual property
right in the Software to User.
Be sure to read this before installing and using the
accompanying software.
1 
						

							4. Transfer of the Software
1) User may transfer the Software to any third party, provided always that:a) User must transfer, with the Software, to such third party EULA and all the relateddocumentation with all copies thereof, and must not retain any copy thereof.
b) Such third party has agreed to the terms and conditions of EULA.
2) Except as otherwise expressly permitted above, User may not sublicense, assign, transfer or otherwise dispose of the license for the Software.
5.Reverse Engineering
User may not reverse engineer, decompile, and/or disassemble the Software, except and
only to the extent that such activity is expressly permitted by applicable law notwithstanding
this limitation.
6.Limitations of Warranty
1) Except as expressly specified herein, the Software is provided as is without warranty of any
kind, including but not limited to implied warranties for fitness for a \
particular purpose, mer-
chantability, title and non-infringement of any third party rights.
2) If User finds a material defect, which effects to the proper operation of the Software, in the media of the Softwa re,  DUKANE  will replace such defective media at no charge, if such media
is returned to distributor from which such User purchased it within 1 month from such pur-
chase and if  DUKANE determines that such defect is due to  DUKANE.
7.Limitations of Liability
In no event shall  DUKANE be responsible for any indi rect, consequential or special damages
or lost p rofits even if  DUKANE has been advised of the possibility of such damages, and/or for
any claim for compensation or damage by any third party to User.
8. Others
1) The validity, interpretation, construction and performance of EULA shall be governed by the laws of Japan.
2) User shall not export the Software to any country to which such export would be prohibited by any applicable laws.
END USER LICENSE AGREEMENT
2 
						

							 1. Introduction
1. Introduction
Thank you for your purchase of the  Dukane projector (he reafter  refer red to as unit or p rojec-
tor).
This projector is connected to a personal computer or other equipment and clear\
ly projects
text or graphics to a screen.
This projector is supplied with convenient software that allows presentations to be made more
simply and effectively. This guide gives an overview and describes the use of the accompany-
ing software (contained in the CD-ROM that is supplied with this projector). Look over this
guide in conjunction with the Help functions of the software programs.

  Contents of the Supplied CD-ROM
The supplied CD-ROM contains the following software programs:
• Dynamic Image Utility 2.0
• Viewer PPT Converter 2.0
• Image Express Utility 1.0
Please see the Help functions of the software programs for information about their functions and
operation.

 What Can Be Accomplished with the Supplied Software
Dynamic Image Utility 2.0

 Converts PowerPoint files, JPEG images, and other files and creates slides that can
be displayed with the viewer function of the projector.

  Captures portions of the image from the screens of word processors, spreadsheets,
browsers, and other programs for use in presentations.

  By saving the created slides on a flash memory card 
(*1) and inserting the card into the
PC Card slot of the projector, the slides can be projected to the screen without con-
necting a personal computer.

  The connection of personal computers and projectors by means of a network environ-
ment 
(*2)  or connection with USB cable (*3) or serial cable allows the following uses. (In a
network environment or USB cable connection (*3)  , support of multiple units is permit-
ted.)
(1) Images and slides can be sent from the personal computer to the projector and
then projected to the screen. When using Microsoft PowerPoint 2000/2002, slides
can be sent synchronized with the slide show page feed.
(2) A personal computer can be used to switch the projector power on/off, control the adjustment of image quality and other settings, and to display the remaining lamp
life.
3 
						

							Viewer PPT Converter 2.0

Converts files created with Microsoft PowerPoint 95/97/2000/2002 to an indepen-
dent index format with a simple operation to enable direct playback with the viewer
function of the projector.

  When using Microsoft PowerPoint 2000/2002, Viewer PPT Converter 2.0 can be started
from PowerPoint (by means of add-in registration to PowerPoint).
Image Express Utility 1.0

 Using a network environment (*2), this program enables the screen image displayed by
the personal computer to be sent to the projector and then projected to a screen.

  T wo methods are available for sending the screen image to the projector. Continuous
T ransmit automatically sends the screen image of the personal computer at a fixed
interval. Single Frame Transmit sends the screen image by clicking the screen button
(or pressing a key).
*1: Please purchase a commercially available PCMCIA Type 2 (ATA specification) flash memory card.
*2: Please check the network environment on page 6.
*3: USB cable connection is not supported by the LT260, LT240, LT220 and VT770.
1. Introduction
4 
						

							1. Introduction
5

 Projector Easy Connection Settings
The Easy Connection option is a mode that can abbreviate the troublesome
LAN settings when using the Image Express Utility and connecting the PC and
projector via a wireless LAN.
•Fr om the Advanced menu, select [Projector Options] 
[LAN Mode] 
[Network
Type] 
[Mode] 
[Easy Connection] on the projector (except the GT6000/GT5000). (No
setting for IP address, SSID and channel are required.)
• After you have installed the software from the supplied CD-ROM to your PC, before
executing Easy Connection using Image Express Utility, visit our website to update the
information about Image Express Utility and its related software.
Software can be downloaded from our website at no charge.
• Easy Connection is available on Windows 2000 Professional, Windows XP Professional
and Windows XP Home Edition.
(Using the Easy Connection mode on Windows XP Tablet PC Edition requires the Image
Express Utility version 1.01.0004 or later. )
•  Easy Connection is available only when both PC and p rojector use the  Dukane optional
wireless cards.
• Easy Connection is not available on Dynamic Image Utility included on th\
e supplied
CD-ROM.

  Supported Projectors
The following  Dukane projectors will be supported:
9060
9066 
						

							1. Introduction

 Operating Environment
Supported Equipment
CPU
Memory
Network Environment
(when used)
Supported OS
Resolution
Screen Colors IBM PC/AT compatible computers
•  CD-ROM drive a requirement (at time of installation)
Pentium MMX processor or higher a requirement
Pentium III 800 MHz or higher recommended
For Windows XP • 128 MB or more a requirement
• 192 MB or more recommended
For other operating systems • 64 MB or more a requirement
• 128 MB or more recommended
 More memory may be necessary when other applications are
run at the same time.
A LAN that supports TCP/IP or a wireless LAN environment is a
r equirement.
• For information on supported LAN cards, visit: http://www.nec-pj.com/
•  For wi reless LAN connection, use  Dukane optional wi reless LAN
card (SWL-2100N-N*).
* Last digit of the model code varies depending on which country you live in. For more information, visit the above Website.
W indows 98
W indows 98 Second Edition
W indows Me
W indows 2000 Professional
W indows XP Home Edition
Windows XP Professional, Windows XP Tablet PC Edition
* Microsoft Internet Explorer 5.01 or higher is required for the
aforementioned environments.
* Does not support Windows power-saving function.
1024 dots x 768 lines recommended
( 800 dots x 600 lines recommended for LT220 and MT860 )
High Color (15 bit, 16 bit)
T rue Color (24 bit, 32 bit)
6 
						

							7
 2. Equipment Connections and Settings






 When Using a Network Environment
 What Can Be Accomplished
•Using Image Express Utility 1.0, the screen image displayed by the personal computer can be
sent to the projector and then projected to a screen.
•Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then
projected to a screen.
•Using the projector control function of Dynamic Image Utility 2.0 allows operations to be
performed from the personal computer which include switching the projector power on/off,
signal selection, and adjustment of the picture quality.
 Equipment to Be Prepared
 • Projector (This unit)  • Personal computer  • LAN card
 Settings at the Projector Side
Preparation:
(1) Insert the LAN card into the PC Card slot of the projector. (“Inserting and Removing a PC
card” in the user’s manual)
(2) Switch on the projector power and project to the screen. (“Projecting an Image” in the
user’s manual)
(3) Switch to the advanced menu. (“Menu” in the Users manual)
Press the MENU button.
The menu will be displayed.
Use the SELECT  button to align the cursor with [Projector Options],
then press the ENTER button.
The sub menu will be displayed.
Use the SELECT  button to align the cursor with [LAN Mode], then
press the ENTER button.
The LAN mode setting screen will be displayed.
Set the various items.
See Using On-Screen Menu 
 Menu Description & Functions 
 Setting LAN
Mode in the users manual on the supplied CD-ROM for information about the various
items.
NOTE
When switching the power of the projector on/off with the projector control function, please
set [Projector Options] 
 [Setup] 
 [Page 4] 
 [Idle Mode] to On.
2. Equipment Connections and Settings 
						

							 Settings at the Personal Computer Side
Perform the regular LAN connections settings according to the instruction manual of the
LAN card (adapter).
There are no special settings to be made in the connections with the projector.

 When Making Connections with Serial Cable or USB Cable(*)
   * USB cable connection  may not be supported by  some models.
 What Can Be Accomplished
 • Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then
projected to a screen.
 • Using the projector control function of Dynamic Image Utility 2.0 allows operations to be performed from the personal computer which include switching the projector power on/off,
signal selection, and adjustment of the picture quality.
[For Connections with USB Cable]
  Equipment to Be Prepared
 • Projector (This unit)      • Personal computer      • USB cable (\
included with the projector)
  Connection at the Projector Side
Plug the B type connector of the USB cable to the USB port [PC] (type B\
).
  Connection at the Personal Computer Side
Plug the A type connector of the USB cable to the USB port [PC] (type A\
).
[For Connections with Serial Cable]
  Equipment to Be Prepared
 • Projector (This unit) • Personal computer
 •  Serial cable (Optional  or a com mercially available RS-232C cross cable may be used.
 Connection at the Projector Side
Plug the serial cable into the PC CONTROL connector. (“Terminal Panel Features” and “PC
Control Connector” on Users manual)
 Connection at the Personal Computer Side
Plug the serial cable into the (RS-232C) serial connector.
NOTE:  When switching the power of the projector on/off with the projector control function,
please set [Projector Options] 
[Setup] 
[Page 4] 
[Idle Mode] to “On”.
For  9060 , set [Idle Mode] to “On” only when  the projector is connected with a USB cabe.
2. Equipment Connections and Settings
8