Eiki Efd 52 Owners Manual

29
Menu operations
List of menu items
Picture
AV Mode  ......................................................Page 30
OPC  .............................................................Page 30
Backlight  ......................................................Page 30
Contrast  .......................................................Page 30
Brightness ....................................................Page 30
Color  ............................................................Page 30
Tint...

30
Picture menu
MENU[
Picture]
PictureAudio Power Control 
Contrast  OPC [Off]  AV Mode  [Standard]
Brightness 
Color
Tint
Sharpness 
Advanced 
Reset[  30] 
[    0] 
[    0] 
[    0] 
[    0] 
Red  [    0] 
Green  [    0] 
Blue  [    0] 
Backlight [+16] 
+
+
+ +
+
+
+
„ Selecting a preset AV Mode
The AV Mode function enables you to select 
appropriate settings for picture and audio to account 
for the system environment which can vary due to 
factors like room brightness or the type of image 
input from...

31
OPC (Optical Picture Control) setting
You can set the monitor to automatically adjust the 
screen to suitable backlight brightness according to 
the lighting conditions.
OPC indicator
Selectable
itemsDescription
On(Display) Displays the OPC effect on 
the screen while adjusting the 
brightness of the screen.
On Automatically adjusts
Off The brightness is fixed at the value 
set in “Backlight”. (See page 30.)
OPC indicator
Light off “Off ” is selected in the OPC 
setting.
Lighted (Green) “On” or...

32
Audio menu
Audio 
Treble 
Bass
Balance
Reset[  0] 
[  0] -
L+
[  0]  - +
R
StandardPower Control 
„ Audio adjustment
You can adjust the audio of the selected AV mode.
Selectable
items
{
button 
y
button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio 
from the right 
speakerDecrease audio 
from the left 
speaker
• For resetting all adjustment items to the factory preset 
values, press 
x
/
z
 to select “Reset”, press ENTER
,
press 
x
/
z
 to...

33
„Ecology
When set to “Yes”, The monitor activates the 
following power saving mode.
•  “OPC” set to “On” (Page 31)
•  “Standby Mode” set to “Mode2” (Page 36)
•  “No Operation Off ” set to “3 Hours” (Page 32)
•  “Power Management” set to “Mode1” (Page 32)
• When selecting “Yes” for “Ecology”, the settings related to 
“Ecology” (“OPC”, “Standby Mode”, “No Operation Off”, 
and “Power Management”) will be lost. Once you have 
selected “Yes” for “Ecology”, these settings will not return 
to the previous...

34
Changing the password
1  Select “Password”, then press ENTER.
•  The screen for entering the password appears.
2  Enter the password in “Old Password” using 

x
/
z
/
{
/
y
, then press ENTER.
3  Enter the password in “New Password” using 

x
/
z
/
{
/
y
, then press ENTER.
4  Enter the same password again in “Reconfi rm” 
using
x
/
z
/
{
/
y
, then press ENTER.
• If you do not need the password protection for the “Setup” 
menu settings anymore, press ENTER
 without entering 
new password in steps 3...

35
„Labelling input sources
(Input Label)
You can assign each input source a label as you 
prefer.
1 Press COMPUTER (1/2), DVI, HDMI, S-VIDEO or 
VIDEO to select the desired input source.
2 Press MENU and the MENU screen appears.
3 Press 
{
/
y
 to select “Setup”.
4 Press 
x
/
z
 to select “Input Label”, and then 
pressENTER.
•  When an HDMI input terminal is selected, a 
Menu screen for selecting “Auto” or “Manual” is 
displayed.
•  When you select “Auto” using 
x
/
z
, the Menu 
screen returns to the...

36
Adjusting the computer image manually
Ordinarily you can easily adjust the picture as 
necessary to change image position using “Auto 
Sync”. In some cases, however, manual adjustment 
is needed to optimize the image.
Selectable 
itemsDescription
H-Position Centers the image by moving it to the 
left or right.
V-Position Centers the image by moving it up or 
down.
Clock Adjusts when the image flickers with 
vertical stripes.
Phase Adjusts when characters have low 
contrast or when the image flickers.
•...

37
„TCP/IP setting
(TCP/IP)
Set the TCP/IP manually.
1  Select “Off ” for “DHCP Client”, then press 
ENTER.
2 Select “TCP/IP”, then press ENTER.
3 Enter “IP Address” using 
x
/
z
/
{
/
y
, then press 
ENTER.
IP Address
Subnet Mask
Gateway192.168.150.002
255.255.255.000
000.000.000.000 MENU [Setup---TCP/IP]
4 Enter “Subnet Mask” using 
x
/
z
/
{
/
y
, then 
pressENTER.
5 Enter “Gateway” using 
x
/
z
/
{
/
y
, then press 
ENTER.
Selectable 
itemsDescription
IP Address Factory default setting:...

38
Option menu
Option
Dynamic Range 
Language
HDMI Setup
Resize
Timer
Picture Flip
Multi Screen
Power On Delay
LED
Background
Color Space  Signal Type  Audio Output 
Video System  Closed Caption
„Selecting Closed Caption
(Closed Caption)
This monitor is equipped with an internal Closed 
Caption decoder. It allows you to view conversations, 
narration and sound effects as subtitles on your 
monitor. Closed Captions are available on some TV 
programs and on some VHS home video tapes at 
the discretion of...