Eiki Eip-200 Dlp Projector Owners Manual
Have a look at the manual Eiki Eip-200 Dlp Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
37 Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector. Press BMENU.• The “Picture” menu screen for the se- lected input mode is displayed. Adjustment buttons (P/R/O/Q) Example: “Picture” screen menu for INPUT 1 (RGB) mode Press Q or O and select “Picture” to adjust. 1 2 ENTER button RETURN button Menu item Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightRedBlue 1CLR TempBright Boost Lamp SettingStandard Bright Reset SEL./ADJ. ENTER END MENU/HELP button Adjustment buttons (P/R/O/Q) MENU/HELP button ENTER button • Press lRETURN to return to the previous screen when the menu is displayed.
38 Using the Menu Screen (Continued) Press P or R and select “Bright” to adjust. • The selected item is highlighted. • Press hENTER again to return to the previous screen. Press O or Q to adjust the item selected. • The adjustment is stored. Press BMENU/HELP.• The menu screen will disappear. 3 4 5 0 Bright Picture SEL./ADJ. Rtn. Menu END Picture Picture Mode Contrast 0 15 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightRedBlue 1CLR TempBright Boost Lamp SettingStandard Bright Reset SEL./ADJ. Single ADJ END Note Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightRedBlueCLR TempBright Boost Lamp SettingStandard Bright Reset SEL./ADJ. Single ADJ END Picture Resize Image Shift 0 0SCR - ADJPRJ - ADJ Help KeystoneAuto Keystone OffNormal 1 Items to be adjusted • Menu buttons do not function while the projector is operating the “Auto Sync”, “Break Time”, “FREEZE”, or “AV MUTE” functions. Note To adjust the projected image while watching it Press hENTER.• The selected item (e.g. “Bright”) is dis- played by itself at the bottom of the screen. • When pressing P or R, the following item (“Red” after “Bright”) will be displayed.The item displayed by itself
39 Picture Adjustment (“Picture” menu) Selectable items Standard Presentation Movie Game *sRGB QExample: “Picture” screen menu for INPUT 1 (RGB) modeQExample: “Picture” screen menu for INPUT 3 mode Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightRedBlue 1CLR TempBright Boost Lamp SettingStandard Bright Reset SEL./ADJ. ENTER END Description For standard image Brightens portions of image for more enhanced presentations. Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of images from a computer. Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightColorTint0 Sharp 1CLR TempBright Boost Progressive 3D ProgressiveStandard Reset SEL./ADJ. ENTER END Lamp Setting Bright Menu operation n Page 37 • You can also press G PICTURE MODE on the remote control to select the picture mode. (See page 34.) • *sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when “sRGB” is selected. For additional information about the sRGB function, visit “http://www.srgb.com/”. You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected. Note 1 1 1 1 1 Selecting the Picture Mode • When “sRGB” is selected, the projected image may become dark, but this does not indicate a malfunction. Info • “sRGB” is displayed only when RGB signal is input. • You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are retained in memory. CLR Temp 7500K 7500K 6500K 7500K –Bright Boost 1 2 0 2 –Lamp Setting Bright Bright Eco + Quiet Bright Bright The default settings of each item when selecting Picture Mode
40 4 44 4 4 Progressive • In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered. • When the image is blurred or noisy, switch to the optimal mode. • When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be se- lected. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image. Selectable items 2D Progressive 3D Progressive Film ModeDescription Useful to display fast-moving images such as sports. Useful to display relatively slow- moving images such as drama and documentary more clearly. Reproduces the image of film source* clearly. Displays the optimized image of film transformed with three-two pull down (NTSC and PAL60Hz) or two-two pull down (PAL50Hz and SECAM) enhance- ment to progressive mode images. Note 5 55 5 5 Lamp Setting Select- able items Eco + Quiet BrightBright- ness Approx. 87% 100%Power consumption (When using AC 100V) 305W 350WLamp Life Approx. 3,000 hours Approx. 2,000 hoursFa n sound Low Normal • When “Lamp Setting” is set to “Eco+Quiet”, the power consumption will decrease and the lamp life will extend. (Projection brightness decreases approximately 13%.) Note Picture Adjustment (“Picture” menu) (Continued) 2 22 2 2 Adjusting the Image *1 Not adjustable/selectable when selecting “sRGB”. *2 Not displayed in the RGB input mode. *3 “Tone” will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust “Tone”, but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals . Q button For more contrast. For more brightness. For stronger red. For stronger blue. For more color intensity. For making skin tones greenish. For more sharpness. For more vividness. Adjustment Items Contrast Bright Red* 1 Blue*1 Color*2 Tint*2 *3 Sharp*2 Bright Boost*1 O button For less contrast. For less brightness. For weaker red. For weaker blue. For less color intensity. For making skin tones purplish. For less sharpness. For high fidelity color reproduc- tion. Note • “Bright Boost” and “CLR Temp” cannot be set when “sRGB” is selected. • To reset all adjustment items, select “Reset” and press hENTER. 3 33 3 3Adjusting the Color Temperature • Values on “CLR Temp” are only for general standard purposes. Note Selectable items 5500K 6500K 7500K 8500K 9300K 10500KDescription For lower color temperature for warmer, reddish incandescent-like images. For higher color temperature for cooler, bluish, fluorescent-like images. Menu operation n Page 37 P R
41 Adjusting the Projected Image (“SCR - ADJ” menu) Picture Resize Image Shift 0 0SCR - ADJPRJ - ADJ Help KeystoneAuto Keystone OSD Display Background Setup Guide PRJ Mode LanguageFront English On Logo On Off Normal SEL./ADJ. ENTER END 87654 321 1 11 1 1 Setting the Resize Mode • For details of the Resize mode, see pages 32 and 33. • You can also press HRESIZE on the remote control to set the resize mode. (See page 32.) Note 2 22 2 2Adjusting the Image Position You can move the projected image vertically. Q button • You cannot set this item when “Resize” is set to “Normal”. Note O buttonMenu operation n Page 37 *“Auto Keystone” can be operated only when using EIP-2500. 3 33 3 3 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trap- ezoidal distortion is called Keystone Correction. For Manual Keystone Correction Set “Auto Keystone” on the “SCR - ADJ” menu to “Off”, select “Keystone”, and then adjust with the slide bar. For Auto Keystone Correction Set “Auto Keystone” on the “SCR - ADJ” menu to “On”. O or R button Q or P button Manual Correction a When using EIP-2500 a When using EIP-200 Select “Keystone” on the “SCR-ADJ” menu and adjust with the slide bar. • The Keystone Correction can be adjusted up to an angle of approximately ±13 degrees with the “Auto Keystone” and up to an angle of approximately ±13 degrees with the manual “Keystone” (when “Resize” is set to “Normal”). Note See page 31 for details of Keystone Correction.
42 The projector can switch the on-screen display language among 11 languages. Selectable items Front Ceiling + Front Rear Ceiling + RearDescription Normal image (Projected from the front of the screen) Inverted image (Projected from the front of the screen with an inverted projector) Reversed image (Projected from the rear of the screen or with a mirror) Reversed and inverted image (Projected with a mirror) 6 66 6 6Selecting the Setup Guide 8 88 8 8Selecting the On-screen Display Language Selectable items On OffDescription Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. 7 77 7 7Reversing/Inverting Projected Images English Deutsch Español Nederlands Français Italiano Svenska Português Adjusting the Projected Image (“SCR - ADJ” menu) (Continued) 4 44 4 4Setting On-screen Display Menu operation n Page 37 Selectable items On OffDescription All On-screen Displays are displayed. INPUT/VOLUME/AV MUTE/FREEZE/ AUTO SYNC/RESIZE/PICTURE MODE/ “An invalid button has been pressed.” are not displayed. 5 55 5 5Selecting the Background Image Selectable items Logo Blue NoneDescription EIKI logo screen Blue screen — See page 19 for details of Projection (PRJ) Mode.
43 Adjusting the Projector Function (“PRJ - ADJ” menu) Picture Auto SearchSCR - ADJPRJ - ADJHelp Auto Sync Auto Power Off System Sound System Lock h On On On On SEL./ADJ. ENTER END0 Lamp Timer(Life) 100% Speaker OnRS-232C 9600 bpsFan Mode Normal 1 11 1 1 Auto Search Function This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed. When “Auto Search” is set to “On” • If two or more input signals are found, the pro- jector selects the input source in the order of INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4 when you press INPUT (P/R) on the projec- tor. • While “Auto Search” is set to “On”, press CINPUT 1,CINPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select an input mode other than the input mode se- lected by the projector. Note 2 22 2 2Auto Sync (Auto Sync Adjustment) Menu operation n Page 37 • Auto Sync adjustment is also performed by pressing F AUTO SYNC on the remote con- trol. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual ad- justments. (See page 46.) Note Selectable items On OffDescription Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not automatically performed. • When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes. Selectable items On OffDescription When no input signal is detected for more than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Note 3 33 3 3Auto Power Off Function 5 55 5 5 Speaker Setting Selectable items On OffDescription The audio signal is output from the internal speaker. The audio signal is not output from the internal speaker. 4 44 4 4Setting the Confirmation Sound (System Sound) Selectable items On OffDescription A confirmation sound is made when the projector turns on/off. No confirmation sound is made.
44 Info This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only au- thorized users have access. • If you lose or forget your keycode, contact your nearest EIKI Authorized Dealer or Service Center. Even if the product warranty is valid, the keycode reset will incur a charge. Press the 4 buttons on the remote control or on the projector to en- ter the preset keycode in “Old Code”. •When setting the keycode for the first time, press R on the projector for four times. Setting the System LockPRJ - ADJ Old Code New Code Reconfirm–––– –––– –––– 1 • If you input a wrong keycode, the cursor returns to the first point of the “Old Code”. • The preset keycode is 4 R buttons on the projector. When you press the R but- ton four times, the keycord input screen disappears. Note 8 88 8 8 System Lock Function Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued) 7 77 7 7 Fan Mode Setting Menu operation n Page 37 This function changes the fan rotation speed. Selectable items Normal HighDescription Suitable for normal environments. Select this when using the projector at altitudes of approximately 1,500 meters (4,900 feet) or more. 6 66 6 6Selecting the Transmission Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Selectable items 9600bps 115200bpsDescription Transmission speed is slow. Transmission speed is rapid. P R 9 99 9 9Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp life may vary depending on the us- age condition. Lamp usage condition Operated exclusively with Lamp Setting set to “Eco +Quiet” Operated exclusively with Lamp Setting set to “Bright”100% Approx. 3,000 hours Approx. 2,000 hours 5% Approx. 150 hours Approx. 100 hours Remaining lamp life Note “Life” aSetting/Changing the keycode When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.
45 Note Input screen for keycode To cancel the keycode that you have already set • Press R on the projector for four times in steps 2 and 3 above. When the System Lock is set• When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection. Enter the same keycode in “Re- confirm”. • You can not use the following buttons for keycode: • oSTANDBY-ON (on the projector) • fON • eSTANDBY• hENTER • lRETURN • BMENU/HELP •System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you used the buttons on the projector in setting your keycode, the keycode cannot be canceled with the remote control. Press the 4 buttons on the remote control or on the projector to en- ter the new keycode in “New Code”. Setting the System LockPRJ - ADJ Old Code New Code Reconfirm ****–––– –––– System Lock–––– 2 3 Note Menu operation n Page 37 Locking the Operation Buttons on the Projector (Keylock Function) Use this function to lock the operation buttons on the projector. a Taking the Keylock offHold down p ENTER on the projector for about 5 seconds. ROn-screen Display a Locking the Operation ButtonsHold down p ENTER on the projector for about 5 seconds while the projector is being turned on. ROn-screen Display • The keylock function does not affect the op- eration with the remote control buttons. • You cannot use the keylock function while the projector is warming up. • When the projector is in standby mode, you can release the keylock by holding down p ENTER and o STANDBY-ON on the projec- tor simultaneously for about 5 seconds. • Keylock does not function while the projector is: displaying the “Setup Guide” or “Menu” screens, in standby mode, warming up, changing input signals, operating “Auto Sync” function, in “FREEZE” mode or on the “Sys- tem Lock” screen during warming up. Info
46 Troubleshooting with “Help” menu Utilizing “Help” menu functions This function advises you to solve the problems during usage. • You can adjust the items with check marks (✔). • The items in the “Help” menu change, de- pending on the input signal or setting that you have selected. •If the problem is not solved, refer to “Troubleshooting”. (see pages 59 and 60) • When selecting “sRGB” in Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types. Press O or Q to adjust. If the image is not improved, se- lect “Adjust horizontal noise.”, then press hENTER. Select “Initiate “Auto Sync” Ad- justments”, then press hENTER. Press P or R to select “Vertical stripes or flickering image ap- pears” on Help menu, then press hENTER. Example: When image flickering appears Operation to solve image flickering when pro- jecting the computer RGB signal. 34 5 6 Picture There is no picture or audioSCR - ADJ PRJ - ADJHelp Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. ENTER END If there is no change after performing Auto Sync adjustments, adjust the following items.Initiate “Auto Sync” Adjustments.Help Vertical stripes or flickering image appear Adjust vertical noise Adjust horizontal noise Reset the 2 items above Return Cur. sig. freq: H 43 kHz / V 60 Hz SEL. ENTER END Note Press BMENU/HELP.1 2 Press O or Q to select “Help”, then press hENTER. Adjustment buttons (P/R/O/Q) ENTER button MENU/HELP button 0 PhaseSEL./ADJ. Rtn. Menu ENDHelp