Eiki Eip-25 Multimedia Projector Owners Manual

                        
1
Table of Contents 
 
1. Introduction
····················································································2  
2. Features
···························································································2 
3. Operation notice
···········································································3 
4. Projector figure
·············································································4 
4.1 Function list of control panel          4 
5....

                        
2
1.Introduction  
 
Please read this manual carefully before using, to find out:   
• How to use the projector safely 
• How to use the remote control 
• How to set up and connect the projector 
• How to start and turn off the projector 
• How to use the On-screen display (OSD) menus 
• How to replace the lamp module 
• How to solve troubleshoot common problems 
 
 
 
 
 
 
 
2.Features 
 
• Use the technology of chip TI 0.7”/ 0.6” DLPTM. 
• Full-function remote including mouse...

                        
3
3.Operation notice: 
 
Please read and follow the following safety instructions and description carefully. 
Inappropriate operation method may result in fire, electrical shock, and personal 
injury or shorten the life span of projector. 
 
 
 Warning:  Do not cover the lens while the lamp lights up. 
 Warning:  To protect your eyes, do not look directly into the projector’s 
light source. 
 Warning:  Make sure that you provide adequate ventilation for the 
projector. Do not...

                        
4
4.Projector figure 
 
4.1 Function list of control panel: 
 
 
 
 
Zoom ring 
Infrared remote 
sensor 
Control panel 
↑↓←→ 
LAMP LED 
TEMP LED 
POWER LED 
POWER 
MENU 
SOURCE 
AUTO/ENTER 
Lens Cap
Focus ring 

                        
5
Power LED (Indicator light) 
• When the projector is on, Power LED will blink. Press “Power” button to 
enter screen, Power LED remains lit continually. 
 
 
Temp LED (Indicator light) 
• When fan malfunctions, the screen will shows the message stating “fan 
error, system is forced to turn off!”. Temp LED remains lit continually. 
• When the temperature is unusual, screen will shows the message stating 
“temperature error, system is forced to turn off!”. Temp LED blinks once...

                        
6 ÇÈ
 (Up and down button) 
• OSD active: Press to move between menu options. 
• OSD inactive: Press to select the video input source. 
 
ÅÆ(Left and right button) 
• When using these buttons, press ”Auto/Enter” button then press right key to 
add setting value; on the contrary, left button to reduce the setting value. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

                        
7
5.Accessories 
You should check to make sure the accessories below are complete with nothing 
missing. For any missing accessory, please contact the local distributor.
  
 
          Projector lens cap          power cord      Component Video cable  
            Composite Video cable         PC Audio in/out cable             S-Video cable  
                          
VGA cable                   USB cable                 Carry bag...

                        
8
5.1 Remote Control  
The infrared sensor is located on the top of the projector. The distance between the 
sensor and remote control should not exceed 10 meters for the remote control to 
function correctly. 
 
How to insert batteries in the remote control: 
 
1) Remove the battery compartment cover. 
2) Insert two AAA batteries into the battery compartment. Ensure the batteries 
polarity is aligned correctly. 
3) Replace the battery compartment cover. 
 
• Using remote control...

                        
9
5.2Function list of remote control panel: 
 
Function key  Function description 
Freeze/Esc/L 
• OSD inactive: press this button to freeze the display image. 
Press again to resume motion. 
• OSD active: press this button to exit. 
• Mouse active: Use as the left mouse button. 
Enter/R 
• During common status or using OSD options, please refer to 
“Auto/Enter” of “Projector panel” in page 5. 
• Mouse active: Use as the right mouse button. 
Power 
• Please refer to “Turning on...