Eiki Lc-Xbl20 Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xbl20 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Video Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ......... Disabled. L1 .......... For an active picture. L2 .......... For a still picture. Film ....... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Progressive Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ......... Disabled. L1 .......... Lower reduction L2 .......... Higher reduction Note: Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i or 1080i is selected (p.38). To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. Reset Store To store the adjusted data, select Store and press the the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–4) in the Image Mode Selection on page 39. Store Menu A confirmation box appears and then select yes.
42 Video Input This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Size Adjustment Screen Menu1 2 Provide the image at the 4:3 normal video aspect ratio. Custom Note: • When no signal is detected, Normal is set automatically. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. • wide cannot be operated when 720p, 1035i or 1080i is selected in the AV System Menu (p.38). wide Provide the image at the 16:9 wide screen ratio. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons select the desired item and then press the SELECT button. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V .......... Adjust the Horizontal/Vertical screen scale. H&V ................... When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ..... Adjust the Horizontal/Vertical screen position. Common ........... Save the adjusted scale or position to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at yes. When Custom is selected, the saved scale or position is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes.
43 Setting Setting Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, japanese,Thai and Turkish. Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items. 1 2Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item. This projector has a Setting menu that allows you to set up the other various functions described below. Language Menu position This function is used to change the position of the On-Screen Menu. Select Menu position and press the SELECT button. The Menu position changes each time you press SELECT button as follows. the top left → the top right → the center → the bottom left → the bottom right → the top left →..... 3Use the Point ▲▼ buttons select the desired item and then press the SELECT button.
44 Setting Note: • Auto Keystone corrects vertical distortion only, not correct horizontal distortion. • The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.49). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected properly by pressing the AUTO SETUP or the AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (pp.23, 45). • Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.30-31). Auto setup Input search This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ▲▼ buttons to select one of the following options. Off ........... Input search will not work. On1.......... Input search works under the following situation. – When pressing the AUTO SETUP button on the top control. – When pressing the AUTO SET button on the remote control. On2.......... Input search works under the following situation. – When turning on the projector by pressing the ON/STAND-BY button on the top control or the remote control. – When pressing the AUTO SET button on the remote control. – When pressing the AUTO SETUP button on the top control. – When the current input signal is cut off.* * If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On-Screen menu is displayed. Auto PC adj . On........Enables Auto PC Adjustment when pressing the AUTO SET button on the remote control or the AUTO SETUP button on the top control. Off .......Disables Auto PC Adjustment. Auto Keystone Auto . . . . .Always works and corrects keystone distortion according to the projector's tilt. Manual....Works only when pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Off .......Disables Auto Keystone. Auto setup Note: • While Input search is set to On1 or On2, the status of Input and Lamp are displayed every time the signal is switched. • Only the last selected input source can be detected. • During Input search is in progress, If the MENU button or the ON/STAND-BY button is pressed, Input search will stop. If the COMPUTER 1/2 button or VIDEO or COMPONENT or S-VIDEO button is pressed, Input search will stop and go back to the button's input signal. • Input search, Auto PC adj . and Auto Keystone cannot be set Off at the same time. This function enables Input search, Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Settings for those functions can be altered as follows:
45 Setting Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Store ....... Keep the keystone correction even when the AC power cord is unplugged. Reset ....... Release the keystone correction when the AC power cord is unplugged. To correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p.23). Background Select the background screen for when no input signal is detected. Press the Point ▲▼ buttons to switch between each option. Blue ... Project a blue background User... Project an image selected in the Logo setting. Black . . Project a black background This function decides whether to display On-Screen Displays. On ........................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off ....... S h o w t h e i n p u t i m a g e i n s t e a d o f the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off ........................... Hide the On-Screen Displays except; ● On-Screen Menu. ● Power off? (p.20) ● P-Timer display. (p.26) ● No signal for Power management (p.50) ● Please wait . . . ● Arrows for the True function in the Screen Menu. (p.34) Display Keystone
46 Setting Logo (Logo and Logo PIN code lock settings) Logo selectThis function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions. Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected. Logo select This function decides on the starting-up display from among following options. User ........ Show the image you captured. Default .... Show the factory-set logo. Off ........... Show the countdown display only. Off Off
47 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image. After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function, select yes in the "Quit?" confirmation box. Note: • Before capturing an image, select Standard in the Image select Menu to capture a proper image (pp.32, 39). • A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. • When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When Logo PIN code lock is set to On, capture cannot be selected. • When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing. • When there is no captured image or it is interrupted while capturing an image, User cannot be selected, you can only switch between Default and Off. Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off ........... The screen logo can be changed freely from the Logo Menu (p.46). On ........... The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory. Logo PIN code lock Off Quit? Off Quit?
48 Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to correct, and then enter the correct number. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number () will turn red for a moment. Enter the correct Logo PIN code all over again. Logo PIN code change Logo PIN code can be changed to your desired four-digit number. Press the SELECT button to select Logo PIN code change . Logo PIN code dialog box appears, use the Point ▲▼buttons to enter the correct code. The New Logo PIN code input dialog box appears. Set a new Logo PIN code, confirmation box appears, choose yes to set the new Logo PIN code. Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting. Use the Point ▲▼ buttons to switch On or Off, and then press the SELECT button to make a chioce. Change the Logo PIN code lock setting Enter a Logo PIN code After a correct Logo PIN code is entered, the following dialog box appears. CAUTION: wHEN yOU HAVE CHANGED THE LOGO PIN CODE, wRITE DOwN THE NEw PIN CODE IN COLUMN OF THE LOGO PIN CODE NO . MEMO ON PAGE 75, AND KEEP IT SECUREL y . SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED . Change the Logo PIN code lock setting Change the Logo PIN code Next ---- Off Select
49 Setting Ceiling Rear Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Terminal TerminalThe COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select Computer 2 or Monitor Out with the Point ▲▼ buttons. Computer 2.. computer input Monitor Out.. monitor out Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (Computer 1, and so on) so that the Terminal function will be available. (pp.25, 36, 37)
50 Setting Power management Time left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready ............... When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed. Shut down ....... When the lamp has been fully cooled down, the power will be turned off. Off .................... Power management function is off. Timer ................ If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point ▲▼ buttons to set the Timer(1~30min). Note: Factory default is Ready: 5 min. On start When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. Note: • When Standby mode is set to Eco, On start cannot be selected. If you want to set On start to On, Standby mode must be set to Network. • Be sure to turn off the projector properly (see “Turning Off the Projector” on page 20). If the projector is turned off in the incorrect sequence, the On start function will not work properly.