Eiki Lc-Xdp3500 Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xdp3500 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
33
MENU
VO L - VO L+
M EN U
I N PU T
PIN Key In Operation
When the projector is turned on and the
PIN LOCK PROTECTION is set to [ON],
the image will show as on the right side.
1. Press the MENU button on the projector
or remote control. Enter PIN code by
keypad or remote control.
2. How to enter a PIN code?
You can use control panel or remote
control.
CONTROL PANEL KEYSTONEREMOTE CONTROL
The control panel and remote control buttons to enter a sequence of PIN code is like the photo below.
(1)...](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-35.png "Page 36
33
MENU
VO L - VO L+
M EN U
I N PU T
PIN Key In Operation
When the projector is turned on and the
PIN LOCK PROTECTION is set to [ON],
the image will show as on the right side.
1. Press the MENU button on the projector
or remote control. Enter PIN code by
keypad or remote control.
2. How to enter a PIN code?
You can use control panel or remote
control.
CONTROL PANEL KEYSTONEREMOTE CONTROL
The control panel and remote control buttons to enter a sequence of PIN code is like the photo below.
(1)...")
![Page 37
Network Control Software Application
34
Network Control Software Application
Register the projector(s) which needs to be controlled.
“ Auto search ” can help you to seek the projector(s) source easily.
After registering in the work group, you can start to control the projec\
tor.
Group the projector(s) into different sections.
You can monitor the status easily by GROUP NAME function in the network.
Monitor the status for each projector.
a.You can manage and change the monitoring content by...](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-36.png "Page 37
Network Control Software Application
34
Network Control Software Application
Register the projector(s) which needs to be controlled.
“ Auto search ” can help you to seek the projector(s) source easily.
After registering in the work group, you can start to control the projec\
tor.
Group the projector(s) into different sections.
You can monitor the status easily by GROUP NAME function in the network.
Monitor the status for each projector.
a.You can manage and change the monitoring content by...")
![Page 38
Before Use
35
Before Use
Before Using Network Control Software
If the system is Windows 2000, NT 4.0 or XP, the PC should be started by the
Administrator.
Before starting the Network Control software, please check the following\
.
(1) The computer is installed with Network Control software.
(2)
The projector is powered on and the LAN wire is well connected to the pr\
ojector.
(3) Make sure the computer and projector can connect to network. Network Con\
trol
software needs to arrange in...](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-37.png "Page 38
Before Use
35
Before Use
Before Using Network Control Software
If the system is Windows 2000, NT 4.0 or XP, the PC should be started by the
Administrator.
Before starting the Network Control software, please check the following\
.
(1) The computer is installed with Network Control software.
(2)
The projector is powered on and the LAN wire is well connected to the pr\
ojector.
(3) Make sure the computer and projector can connect to network. Network Con\
trol
software needs to arrange in...")
![Page 39
36
Before Use
Projector Auto Search.
Click the (Projector search), located projector will show on the network
correctly. (Graph2)
Click (search again), the projector which is well connected with a PC will be
shown. (Graph3)
Click (register projector), the projector information will show on the monitor
window. Click button (exit), it will cancel the registered item then return to
register table.
NOTE
When the security warning window appears while Network Control is execut\
ing,
please...](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-38.png "Page 39
36
Before Use
Projector Auto Search.
Click the (Projector search), located projector will show on the network
correctly. (Graph2)
Click (search again), the projector which is well connected with a PC will be
shown. (Graph3)
Click (register projector), the projector information will show on the monitor
window. Click button (exit), it will cancel the registered item then return to
register table.
NOTE
When the security warning window appears while Network Control is execut\
ing,
please...")
![Page 40
37
Before Use
Projector Auto Search.
Projector Auto Search can rank group names or display names by clicking the
monitor window title (Group Name) or (Projector Name). This will help you easily
understand projectors status.
After registering, you can click button (Data single capture) in the tool bar or
click button (Start Auto Scan) to monitor the projector(s).
NOTE
When pressing (About) button for help, you will see icons explained as in the chart\
.](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-39.png "Page 40
37
Before Use
Projector Auto Search.
Projector Auto Search can rank group names or display names by clicking the
monitor window title (Group Name) or (Projector Name). This will help you easily
understand projectors status.
After registering, you can click button (Data single capture) in the tool bar or
click button (Start Auto Scan) to monitor the projector(s).
NOTE
When pressing (About) button for help, you will see icons explained as in the chart\
.")
![Page 41
38
Before Use
Modify The Projector Setting
If modifying the registered projector setting is needed, please move you\
r cursor to
the data table and click the item that you would like to modify. The detail will be
shown on the right side table.
< Graph 5 > : Register Table.
After changing the projector setting, you can save the data by clicking \
button or
cancel by clicking button.
ItemDescription
Projector nameShow the Host name.
(16 characters at most in ASCII.)
IP AddressShow the IP...](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-40.png "Page 41
38
Before Use
Modify The Projector Setting
If modifying the registered projector setting is needed, please move you\
r cursor to
the data table and click the item that you would like to modify. The detail will be
shown on the right side table.
< Graph 5 > : Register Table.
After changing the projector setting, you can save the data by clicking \
button or
cancel by clicking button.
ItemDescription
Projector nameShow the Host name.
(16 characters at most in ASCII.)
IP AddressShow the IP...")
![Page 46
43
Registering And Configuring The Projector
Link
Select the registered projector in monitor window. Click mouse right key and select
“ Link ” to show the control panel table and the projector c\
onnecting status.
< Graph 12 > : The control panel table.](http://img.usermanuals.tech/thumb/1702/89090/w64_eiki-lc-xdp3500-manual_d-45.png "Page 46
43
Registering And Configuring The Projector
Link
Select the registered projector in monitor window. Click mouse right key and select
“ Link ” to show the control panel table and the projector c\
onnecting status.
< Graph 12 > : The control panel table.")
38 Before Use Modify The Projector Setting If modifying the registered projector setting is needed, please move you\ r cursor to the data table and click the item that you would like to modify. The detail will be shown on the right side table. < Graph 5 > : Register Table. After changing the projector setting, you can save the data by clicking \ button or cancel by clicking button. ItemDescription Projector nameShow the Host name. (16 characters at most in ASCII.) IP AddressShow the IP Address. MaskShow the Mask. GatewayShow the Gateway. MACShow up the MAC code. (The default value can not be modified.) DHCPCapture IP address from network sensor automatically. < Table 1 > : Setting Windows.
Registering And Configuring The Projector
39
Registering And Configuring The Projector
Delete
Select the registered projector in monitor window. Click mouse right key and select
“ Delete ” to erase the registered projector data.
< Graph 6 > : Register Table.
40 Registering And Configuring The Projector Projector Setting Select the registered projector in monitor window. Click mouse right key and select “ projector setting ” to modify the registered projector data. After finishing the setting, you can save by clicking button or cancel by clicking button. < Graph 7 > : Register table. < Graph 8 > :Setting
41 Registering And Configuring The Projector System Setting Click button (system setting) to modify system alert setting. < Graph 9 >
42 Registering And Configuring The Projector System Setting Monitor ItemDescription Lamp TimerRead lamp use time from projector. Air Filter AlertRead Air Filter Timer from projector. System Status/ Tempeture Level Read System Status and Temperature from projector in Power On status. Input SourceRead Input Source from projector in Power ON status. < Table 2 > Default Setting ItemDescription Lamp Timer Alert (Hr.) Default Setting Includes 1000/1500/2000 Hours. When Lamp Timer reaches alert target, window will show lamp timer in red color to remind user to replace the lamp. Air Filter Alert (Hr.) Default setting includes 300/500/800/1000/1500 Hours. When Filter Timer reaches alert target, window will show filter timer in red color to remind user to replace the filter. Auto Scan Timer (minutes) Auto Detect setting. Default setting includes 1/3/5/10 minutes; user can set the optimal default listed in Table 6. < Table 3 > Auto Scan Timer Projector Number (Sets)Timer Interval (Minutes) 1~251/3/5/10 26~503/5/10 51~1005/10 101~25510> * The maximum quantity of projector monitored is 255. < Table 4 >
43
Registering And Configuring The Projector
Link
Select the registered projector in monitor window. Click mouse right key and select
“ Link ” to show the control panel table and the projector c\
onnecting status.
< Graph 12 > : The control panel table.
Control Panel Window Introduction 44 Control Panel Window Introduction Power Control IconName Power on Power off Input Source IconName Video S-Video Y,Pb,Pr DVI-I RGB 1 Change Input Source Function Key IconNameIconName UpFreeze DownBlank LeftKeystone Correction + RightKeystone Correction - MenuIncrease Brightness Auto SyncDecrease Brightness MuteHigher Contrast
45 Control Panel Window Introduction Function Key IconName Lower Contrast Zoom In Zoom Out Volume Up Volume Down Projector Status IconName System Status Input Source Status Lamp Timer Air Filter Timer
46 Control Panel Window Introduction Network Control Window introduction IconNameDescription Scan allCapture the all registered projectors’ information one time only. Start Auto ScanAccording to the system setting, get the projector information automatically. Stop Auto CaptureStop scanning the projector information. Auto SearchSearch the projector in the same network to register and modify the setting. Open Project FileOpen project file which was saved. Save Project FileSave the registered projector in this project. System SettingSetting the projector system reminder message. AboutIcon content description. ExitExit the Network software. Register projectorRegister projector’s information. ExitCancel registered information.
Maintenance Of Projector 47 Maintenance of Projector Filter Sponge Filter When a warning message appears to remind you to clean the sponge filter, please clean the sponge filter immediately. (P.32) Replacing the Anti-dust filter (Part Numcer:13340230) When the use time reaches the filter counter time, the projector will display a message to remind replacing a new filter. If there is no spare air filter available, please contact your dealer. When the use time reaches the filter counter time, the projector will display a message to remind replacing a new Anti-dust filter. If there is no spare Anti-dust filter available, please contact your dealer. Turn off the projector, and unplug the power cord. Allow the projector to sufficiently cool down. 1. Remove the filter cover from the side of projector. 2. Pull out the Anti-dust filter and pack the filter in plastic bag before disposing it. Notice: When upper right corner of the image appears warning message as the grap\ hic shows, it indicates there is a problem with the installation of the Anti-dust filter. Please check again if the Anti-dust filter is firmly installed. 1. Please check if Anti-dust filter is installed or not? 2. Please check if the filter cover is properly closed or not? 1 2 3 3 Anti-dust filter Filter coverSponge filter 3. It is recommended that you clean dust on the filter cover by vacuum cleaner, then gently brush the other side of the filter cover by brush.(Please do not clean the sponge filter with water.) 4. Install Anti-dust filter and press the filter until it is tightly loaded into the filter case. 5. Close the filter cover. When installing, make sure the two extruded points on the filter are facing downward. 6. After installing Anti-dust filter, reset the filter timer.(P.30)