Eiki Projector Eip 5000 User Manual

							99
To AC socket
Power cord
ENTER button
MENU button
H&V LENS 
SHIFT
button STANDBY-ON button
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
Info
•
Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
1Connect the power cord.
•Plug the power cord into the AC socket
of the projector.
2Reset the lamp timer.
For Lamp 1
• When you reset the timer for AH-50001,
while simultaneously holding down
 and , press  on the
projector.
• “LAMP 1 100%” is displayed, indicating
that the lamp timer is reset.
For Lamp 2
• When you reset the timer for AH-50002,
while simultaneously holding down
 and , press  on the
projector.
• “LAMP 2 100%” is displayed, indicating
that the lamp timer is reset. 
						

							100
Computer Compatibility Chart
•Multiple signal support
Horizontal Frequency: 15–126 kHz
Vertical Frequency: 43–200 Hz
Pixel Clock: 12–230 MHz
Sync signal: Compatible with TTL level
Computer
PC/
MAC/ WSHorizontal Frequency (kHz) Vertical 
Frequency (Hz)
PC
1,152  864
1,280 
 720
1,280 
 768
1,280 
 800
1,360 
 768
1,366 
 768
1,152 
 882
1,280 
1,024
1,400 
1,050 VESA 
Standard
Resolution Display DVI
Support
PC/
MAC/ WS
Advanced Intelligent 
Compression
Advanced Intelligent 
Compression
54.3 60
67.5 75
75.7 80
77.3 85
65.9 72 54.8 60
67.4 74
64.0 60
1,600 
1,200
SXGA
WXGA
SXGA+ UXGA 91.1 85
74.7 52 80.0 75 78.1 74 74.6 70
81.3 65
90.1 72
93.8 75
106.3 85 75.0 60
108.4 100
64.0 60
87.5 70
MAC 21HP (WS)
WS
MAC 13
MAC 19
PC (WS)
SUN (WS)
Intelligent 
Compression
640 
 480 34.9
1,152 
 870 68.5 67
60.0
1,280 1,024 78.1 72
60.0 60
1,024 
 768
1,280 
 960
VGA
SXGA
SXGA XGA
True
48.4 60
75
85.9 85
1,152 
 900 60.9 66
71.9 76
MAC 16Upscale
832  624
SVGA
49.6 75
75
90.2 100 64.0 70
64.1 72 45.0 60
47.6 60
47.8 60 47.8 60
62.7 75
Horizontal 
Frequency (kHz) Vertical 
Frequency (Hz)
VGA
PC
SVGA
XGA VESA 
Standard
Resolution
640 
 350
720 
 350
640 
 400
720 
 400
640 
 480
800 
 600
1,024 
 768 Display
Upscale
True
27.0 60
27.0 60
27.0 60
60
31.5 70
31.5 70
31.5
70
31.5 60
34.7 70
37.9 72
37.5 75
43.3 85
47.9 90
53.0 100
61.8 120
78.5 150
80.9 160
100.4 200
31.4 50
35.1 56
37.9 60
44.5 70
48.1 72
46.9 75
53.7 85
56.8 90 DVI
Support
64.0 100
77.2 120
98.3 150
102.1 160
125.6 200
98.8 120 31.5 70
37.9 85
37.9
27.0 85
37.9 85
26.2 50
113.2 140 35.5 43
40.3 50
48.4 60
58.1 72
68.7 85 60.0 75
73.5 90
77.2 96
80.6 100 56.5 70
•
Compatible with sync on green signal
• UXGA, SXGA+ and SXGA compatible in advanced
intelligent compression
• AICS (Advanced Intelligent Compression and Ex-
pansion System) resizing technology
The following is a list of modes that conform to VESA.  However, this projector supports other signals
that are not VESA standards.
The table below lists signal codes that are compatible with the projecto\
r. When the images are distorted or
cannot be projected, adjust the output signal of your computer and so fo\
rth while referring to the table below. 
						

							101
Note
•Depending on the notebook computer, the image cannot be displayed or noise may appear in simulta-
neous (CRT/LCD) mode. In this case, turn off the LCD display on the notebook computer. For more
details, refer to the owner’s manual of the notebook computer.
• When this projector receives 640  × 350 VESA format VGA signals, “640  × 400” appears on the screen.
• When projecting the RGB interlace signal using INPUT 1/2 with “Signal Type” set to “Auto” or “RGB”, the
image may not be projected as desired. In this case, select either INPUT\
 4 (video) or INPUT 5 (S-video).
DTV
15.7
31.5
33.8
15.6
31.3
45.0
37.5
33.8
33.8
28.1
480I
/525I480P/525P
540P
576
I /625I576P/625P
720P/750P
720P/750P
1035
I /1125I1080I/1125I1080I/1125I
60
60
60
50
50
60
50
60
60
50
Signal Vertical Frequency (Hz) DVI Support (Compatible with HDCP)  Horizontal Frequency (kHz) 
						

							102
Troubleshooting
Check
•Projector power cord is not plugged into the wall outlet.
•Power to the external connected devices is off.
•The selected input mode is wrong.
•Cables incorrectly connected to side panel of the projector.
•Remote control batteries have run out.
•External output has not been set when connecting notebook computer.
•Cables incorrectly connected to the side panel of the projector.
•“Bright” is set to minimum position.
• The “BLACK SCREEN” function is working.
•Image adjustments are incorrectly set.
(INPUT 1, INPUT 2, INPUT 3 only)
• Input signal type (RGB/Component) is incorrectly set.
(INPUT 4, INPUT 5 only)
• Video Input system is incorrectly set.
•Adjust the focus.
•The projection distance exceeds the focus range.
• There is fog on the lens. If the projector is carried from a cold
room into a warm room, or if it is suddenly heated,
condensation may form on the surface of the lens and the
image will become blurred. Please set up the projector at least
one hour before it is to be used. If condensation should form,
remove the power cord from the wall outlet and wait for it to
clear.
(Computer Input only)
• Perform “Fine Sync” Adjustments. (“Clock” Adjustment)
•Perform “Fine Sync” Adjustments. (“Phase” Adjustment)
•Turn off the LCD display of the notebook computer.
•Noise may appear depending on the computer.
•Cables incorrectly connected to side panel of the projector.
•Volume is set to minimum.
•The “MUTE” function is working.
• The “Speaker” menu is set to “OFF”.
•If the picture is normal, the sound is due to cabinet shrinkage
caused by room temperature changes. This will not affect
operation or performance.
• See “Maintenance Indicators”.
Problem
An unusual sound is
occasionally heard
from the cabinet.
Maintenance
indicator illuminates or blinks in red.
Page
37
—
45
27–36
17
27
27 –36
60
50
60
63
76
40
22 —
68
68
101
—
27 –36
46
46
73
—
94
Sound is heard but no
picture appears.
Color is faded or poor.
Picture appears but no sound is heard.
No picture and no sound
or projector does not start.
Picture is blurred; noise appears. 
						

							103
CheckProblemPage
All buttons on the
projector and the remote control are unavailable.
Picture is green on INPUT 1or 2
(COMPONENT).
Picture is pink (no green)on INPUT 1, 2 or 3
(RGB).
Picture is too bright and
whitish.
The cooling fan
becomes noisy.
The lamp does not light up even after the
projector turns on.
The lamp suddenly turns
off during projection.
The image sometimes flickers.
The lamps take a long
time to turn on.
Picture is dark.
The remote control cannot be used. •
If the “Stack Setting” menu is set to “Slave” and the “Ke\
ylock
Level” menu is set to “Level B”, all buttons on the projector a\
nd
the remote control are unavailable. Connect the remote control
to the projector, and then use the remote control to operate the
projector.
• Change the input signal type setting.
•Image adjustments are incorrectly set.
•When temperature inside the projector increases, the cooling
fan runs faster.
• The lamp indicator is illuminating in red.
Replace the lamp.
•Cables incorrectly connected to the projector or the connected
equipment works improperly.
•If this happens frequently, replace the lamp.
• The lamps will eventually need to be changed.
The lamps have reached the end of its life. Replace the lamps.
•Operate the remote control while pointing it at the projector’s
remote control sensor.
• The remote control may be too far away from the projector.
• If direct sunlight or a strong fluorescent light is shining on the
projector’s remote control sensor, place the projector where it
will not be affected by strong light.
• The batteries may be depleted or inserted incorrectly. Make
sure the batteries are inserted correctly or insert new ones. 18
84
85
63
60
9
, 10
93 –95
94
27 –36
97
97
17
17
This projector is equipped with a microprocessor. Its performance could be adversely affected by
incorrect operation or interference. If this should happen, unplug the p\
rojector and plug it in again
after more than 5 minutes. 
						

							104
Specifications
DLP® Projector
EIP-5000/EIP-5000L
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480 I/DTV480P/DTV540P/DTV576 I/DTV576P/DTV720P/DTV1035 I/DTV1080 I
0.7 DLP
® chip  × 1
No. of dots:  786,432 dots (1,024 [H]  × 768 [V])
1.2  × electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard \
equipment with EIP- 5000)
260 W  × 2
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75  Ω terminated
P
B: 0.7 Vp-p, 75  Ω terminated
P
R: 0.7 Vp-p, 75  Ω terminated
750 TV lines (DTV720P)
BNC connector
Y: 1.0 Vp-p, sync negative, 75  Ω terminated
P
B: 0.7 Vp-p, 75  Ω terminated
P
R: 0.7 Vp-p, 75  Ω terminated
15-pin mini D-sub connector, 5 BNC connector: RGB separate/composite sync (TTL)/sync
on green type analog input: 0–0.7 Vp-p, positive, 75  Ω terminated
Horizontal sync. signal: TTL level (positive/negative) or composite sync (Apple only)
Vertical sync. signal: Same as above
DVI connector (24-pin), RGB (digital), 250 –1,000 mV, 50  Ω (Compatible with HDCP)
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75  Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75  Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75  Ω terminated
ø3.5 mm stereo minijack, RCA terminal
0.5 Vrms, more than 22 k Ω
ø3.5 mm minijack
0.5 Vrms, less than 2.2 k Ω
9-pin D-sub connector
8-pin RJ-45 modular connector
12–230 MHz
43–200 Hz
15–126 kHz
3.0 W (stereo)
3.3 cm round  × 2
AC 100–240 V
6.6 A (AC 100 V)–2.7 A (AC 240 V)
50/60 Hz
650 W (when “Eco Mode” is “OFF”)/570 W (when “Eco Mode\
” is “ON”) with AC 100 V
620 W (when “Eco Mode” is “OFF”)/550 W (when “Eco Mode\
” is “ON”) with AC 240 V
0.8 W (AC 100 V) – 1.1 W (AC 240 V) (When “Monitor Out” an\
d “LAN/RS232C” are set to “Disable”.)
2,440 BTU/hour (when “Eco Mode” is “OFF”)/2,140 BTU/hour (\
when “Eco Mode” is “ON”)
with AC 100 V
2,330 BTU/hour (when “Eco Mode” is “OFF”)/2,070 BTU/hour (\
when “Eco Mode” is “ON”)
with AC 240 V
41°F to 104°F (+5°C to +40°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
16 
5/32  × 7 3/32  × 18 35/64 (410 (W)  × 180 (H)  × 471 (D) mm) (main body only)
16 5/32  × 7 37/64  × 18 35/64 (410 (W)  × 192.1 (H)  × 471 (D) mm) (including adjustment foot
and projecting parts)
EIP-5000: 33.3 lbs (15.1 kg)
EIP-5000L: 30.7 lbs (13.9 kg)
Remote control, Power cord for U.S., Canada, etc., Power cord for Europe\
, except U.K.,
RGB cable, Remote mouse receiver, Cap for the standard zoom lens, Technical reference
CD-ROM, QUICK GUIDE, Owner’s manual
Product type
Model
Video system
Display device
Standard zoom lens Projection lamp
Component input (INPUT 1)/output (OUTPUT) signal
Horizontal resolution
Component input (INPUT 2)
signal
RGB input (INPUT 1/2)/output
(OUTPUT) signal
RGB digital input signal (INPUT 3)
Video input signal(INPUT 4)
S-video input signal (INPUT 5)
Audio input signal
Audio output signal
(AUDIO OUTPUT 1–5) RS-232C  terminal
LAN terminal Pixel clock
Vertical frequency
Horizontal frequency Audio output
Speaker system
Rated voltageInput current
Rated frequency
Power consumption
Power consumption (standby) Heat dissipation
Operating temperature Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement,  EIKI reserves the right to make design
and specification changes for product improvement without prior notice. \
The performance
specification figures indicated are nominal values of production units. \
There may be some
deviations from these values in individual units. 
						

							105
Glossary
Advanced intelligent compression (Page 100)
High quality resizing of lower and higher resolu-
tion images to fit the projector’s native resolution.
Aspect ratio (Page 48)
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync (Page 70)
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background (Page 77)
Initial setting image projected when no signal is
being output.
Border (Page 48)
Projects a 4:3 image fully within a 16:9 screen by
keeping the aspect ratio at 4:3.
Clock (Page 68)
Clock adjustment is used to adjust vertical noise
when clock level is incorrect.
CLR Temp (Color temperature)  (Page 61)
Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
jector. Decrease the color temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.
C.M.S. (Color Management System) (Page 64)
Function allows you individually adjust the display
characteristics of six colors (R: Red, Y: Yellow, G:
Green, C: Cyan, B: Blue, M: Magenta)
Dot by Dot (Page 48)
Mode that projects images in their native resolution.
Keylock Level (Page 85)
Mode that can lock the operation of projector but-
tons to prevent unauthorized adjustment.
Keystone Correction (Page 41)
Function to digitally correct a distorted image
when the projector is set up at an angle, smoothes
out jaggies on keystone images and compresses
the image not only horizontally but vertically keep-
ing the 4:3 aspect ratio.
Phase (Page 68)
Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase
level is incorrect, the projected image typically dis-
plays horizontal flicker.
Pict in Pict (Page 74)
The Pict in Pict (picture in picture) function allows
you to display two pictures on the same screen.
You can display the image input from a video as
an inset picture overlapping the main picture in-
put from a computer.
Picture Mode (Page 60)
Image quality enhancement function that offers a
richer image by brightening the darker portions of
the image without altering the brightness of the
brighter portions. You can select four different
modes: STANDARD, PRESENTATION, CINEMA
and CUSTOM.
Progressive (Page 62)
The progressive display projects a smoother video
image. You can select three different modes: 2D
Progressive, 3D Progressive and Film Mode.
Resize (Page 48)
Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select six different modes: NORMAL, FULL, DOT
BY DOT, BORDER, STRETCH and SMART
STRETCH.
Shifting the lens (Page 38)
Function to adjust the position of the projected im-
age for the position of the screen by shifting the lens
horizontally and vertically.
Smart Stretch (Page 49)
Projects the image fully in a 16:9 screen by en-
larging only the surrounding areas while keeping
the aspect ratio in the middle part of the image at
4:3. Image will be displayed more naturally than
using “Stretch” mode.
sRGB (Page 64)
An international standard of color reproduction
regulated by the IEC (International Electrotechnical
Commission). As the fixed color area has been
decided by the IEC, the color changes according
to DLP features, so that the images are displayed
in a natural tint based on an original image, when
“C.M.S. Adjustment” is set to “sRGB”.
Stack Setting (Page 84)
Setting for the stack projection that allows you to
increase the brightness of an image by stacking
multiple projectors and projecting same image
simultaneously. You can control projectors for the
stack projection by assigning a projector as the
master and the other projectors as the slaves.
Stretch (Page 48)
Projects the 16:9 image or the squeezed image*
fully in a 16:9 screen.
* 16:9 image that is squeezed horizontally into 4:3image.
System Lock (Page 79)
If the “Keycode” set in the projector is not cor-
rectly entered, the projector will not operate even
if signals are entered. 
						

							106
Index
AC socket...................................................................... 37
ADJ./MOUSE switch ..................................................... 18
Adjustment buttons ........................................................ 56
Adjustment feet .............................................................. 39
Advanced intelligent compression ..............................100
All Reset ........................................................................\
 91
Aspect ratio .................................................................... 48
Audio ........................................................................\
...... 72
AUDIO input (1)  terminal............................................... 27
AUDIO input (2, 3)  terminal........................................... 28
AUDIO input (4, 5)  terminals......................................... 34
Audio Out ....................................................................... 72
AUDIO OUTPUT terminal ............................................. 36
Auto Power Of f .............................................................. 79
Auto Search ................................................................... 78
Auto Sync (Auto Sync  adjustment)............................... 70
AUTO SYNC  button....................................................... 70
Auto Sync Disp .............................................................. 71
Background .................................................................... 77
BLACK SCREEN button ................................................ 50
Border ........................................................................\
.... 48
BREAK TIMER button ................................................... 50
Bright Boost ................................................................... 61
C.M.S. (Color Management  System)............................ 64
C.M.S. Adjustment ......................................................... 64
Carrying handle ............................................................. 13
Clock ........................................................................\
...... 68
CLR Temp (Color  Temperature).................................... 61
DHCP Client .................................................................. 89
Digi. Shift ....................................................................... 75
Direct Power On ............................................................ 87
DNR ........................................................................\
....... 62
Dot By Dot ..................................................................... 48
Eco Mode ....................................................................... 78
ENLARGE buttons ......................................................... 46
ENTER button ............................................................... 56
Exhaust vent .................................................................. 93
Fan Mode ....................................................................... 86
Fine Sync ....................................................................... 68
FOCUS buttons ............................................................. 40
FREEZE button ............................................................. 47
Gateway ........................................................................\
. 90
Geometric adjustment ................................................... 42
H & V  keystone .............................................................. 43
H & V LENS  SHIFT button ............................................ 39
Image Capture ............................................................... 76
Image resizing............................................................... 44
INPUT 1 – 5  modes....................................................... 45
INPUT 1 terminal ........................................................... 27
INPUT 2 terminals ......................................................... 28
INPUT 3 terminal ........................................................... 29
INPUT 4 terminal ........................................................... 34
INPUT 5 terminal ........................................................... 34
INPUT buttons ............................................................... 45
Intake vent ..................................................................... 93
IP Address ..................................................................... 90
Kensington Security Standard  connector..................... 15
Keycode ........................................................................\
. 79
Keylock Level ................................................................ 85
KEYSTONE button ........................................................ 41
Keystone Correction ...................................................... 41
Lamp ........................................................................\
...... 96
Lamp indicators 1,  2 ...................................................... 94
Lamp Mode .................................................................... 83 Lamp Timer 
(Life).......................................................... 83
Lamp unit cover ............................................................. 97
LAN terminal .................................................................. 35
LAN/RS232C ................................................................. 88
Language ....................................................................... 92
L-click button ................................................................. 19
Lens cap ........................................................................\
 13
MENU button ................................................................. 56
Monitor Out .................................................................... 88
Mouse button ................................................................. 19
MUTE button ................................................................. 46
Network ........................................................................\
.. 89
Normal ........................................................................\
... 48
Options (1) ..................................................................... 74
Options (2) ..................................................................... 82
OSD Display .................................................................. 75
OUTPUT (FOR INPUT 1,  2) terminal............................ 36
Pair Stack ...................................................................... 85
Password ....................................................................... 82
Phase ........................................................................\
..... 68
Pict in Pict ...................................................................... 74
Picture ........................................................................\
.... 60
Picture Mode ................................................................. 60
PICTURE MODE button ................................................ 47
Power cord ..................................................................... 37
Power indicator .............................................................. 14
PRJ Mode ...................................................................... 84
Progressive .................................................................... 62
R-click button ................................................................. 19
Remote control .............................................................. 17
Remote control sensor .................................................. 17
Remote mouse receiver ................................................ 19
Resize........................................................................\
.... 48
RESIZE button ............................................................... 48
RGB cable ..................................................................... 27
RS-232C ........................................................................\
 87
RS-232C terminal .......................................................... 35
Save Setting .................................................................. 68
Select Setting ................................................................ 69
Service Mode ................................................................. 90
Set Inputs ....................................................................... 86
Signal Info ...................................................................... 70
Signal Type .................................................................... 63
Smart Stretch ................................................................. 49
Speaker ........................................................................\
. 73
Special Modes ............................................................... 69
sRGB ........................................................................\
..... 64
Stack Setting ................................................................. 84
STANDBY-ON  button.................................................... 37
Startup Image ................................................................ 77
Status ........................................................................\
..... 92
Stretch ........................................................................\
... 48
Subnet Mask .................................................................. 90
System Lock .................................................................. 79
TCP/IP ........................................................................\
... 89
Temperature warning  indicator...................................... 94
UNDO button ................................................................. 56
Video System ................................................................. 76
Volume buttons .............................................................. 46
WIRED R/C JACK ......................................................... 18
WIRED REMOTE terminal ............................................ 18
ZOOM buttons ............................................................... 40 
						

							U.S.A.
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
WorldWide Website  http://www.eiki.com
China
EIKI (Shanghai) Co.,LTD
1. Dapu Road, Golden Magnolia Plaza
#2109 Shanghai, 
200023 China 
Te l :  
86-21-5396-0088
Fax : 86-21-5396-0318
E-Mail : [email protected]
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : [email protected]
Canada
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024   +42 02 20571413
Fax : +42 02 20571411
E-Mail : [email protected]