Eiki Projector Eip Sxg20 User Manual

							MULTIMEDIA PROJECTOR
MODEL EIP-SXG20
 
OWNER’S MANUAL
✽ Projection lens is optional. 
						

							2
This  Multimedia  Projector  is  designed  with  most  advanced  technology  for  portability,  durability,  and  ease  of  use. This 
projector utilizes built-in multimedia features.
 ◆ Functionally Rich
 ◆ Simple Computer System Setting
Th e   p r o j e c t o r   h a s   t h e   M u l t i - s c a n   s ys t e m   t o 
conform  to  almost  all  computer  output  signals 
quickly (p.35). Supported resolution up to WUXGA. ◆
 Multilanguage Menu Display
Operation  menu  is  available  in  12  languages; 
E n g l i s h ,   G e r m a n ,   Fr e n ch ,   I t a l i a n ,   S p a n i s h , 
Portuguese,  Dutch,  Swedish,  Russian,  Chinese, 
Korean, and Japanese (p.49).
 ◆ Power Management
The  Power  management  function  reduces  power 
consumption and maintains lamp life (p.57).
 ◆ Picture-in-Picture
This  projector  is  capable  of  projecting  two  images 
simultaneously  by  placing  a  separate  small  sub 
screen within or next to the main screen. (P.51)
 ◆ Security Function
The  Security  function  helps  you  to  ensure  security 
of the projector. With the Key lock function, you can 
lock  the  operation  on  the  side  control  or  remote 
control  (p.58).  PIN  code  lock  function  prevents 
unauthorized use of the projector (pp.58–59).
This  projector  has  many  useful  functions  such 
a s   l e n s   s h i ft i n g ,   c e i l i n g   a n d   r e a r   p r o j e c t i o n , 
perpendicular  omnidirectional  projection,  variety  of 
lens options, etc.
✔Note:
•The On-Screen Menu and figures in this manual may differ slightly from the product.
•The contents of this manual are subject to change without notice.
Features and Design
 ◆ Motor-driven Lens Shift
 ◆ Shutter Function
The  projector  is  equipped  with  the  shutter  that 
p r ov i d e s   c o m p l e t e   b l a ck n e s s   fo r   a   w h i l e   t h e 
projected  image  is  not  needed  with  keeping  the 
projector  on. The  Shutter  management  function 
allows  you  to  set  the  timer.  It  prevents  leaving 
the  projector  on  with  the  shutter  closed  for  a  long 
time. (p.60)
 ◆ Multi Versatile Platform
T h i s   p r o j e c t o r   a p p l i e s   v a r i o u s   i n p u t / o u t p u t 
terminals and 2 terminal slots for expansion to tune 
to  diversity  of  signals  from  computers  and  video 
equipment  (pp.19-21).  One  of  the  terminal  slots 
is  occupied  by  a  factory-installed  Network  board.  
For  optional  interface  boards,  contact  sales  dealer 
where you purchased the projector.
 ◆ Active Maintenance Filter
The  projector  monitors  the  condition  of  the  filter 
and  replaces  a  filter  automatically  when  it  detects 
the clogging.
 ◆ Helpful Maintenance Functions
Lamp  and  filter  maintenance  functions  provide  for 
better and proper maintenance of the projector.
 ◆ Network board
This  projector  is  equipped  with  a  Network  board 
to  control  and  set  up  the  projector  via  the  network 
cables  with  the  web  browser  on  your  computer. 
Th e   p r o j e c t o r   c a n   b e   c o n t r o l l e d   a n d   s e t   u p 
remotely.
Projection  lens  can  be  moved  up,  down,  right  and 
left  with  the  motor-driven  lens  shift  function. This 
function  makes  it  easy  to  provide  projected  image 
where  you  want.  Zoom  and  focus  can  also  be 
adjusted with a motor-driven operation. (p.28)
* 
Z o o m   a n d   fo c u s   f u n c t i o n s   m ay   n o t   o p e r a t e 
depending on the optional lens.
 ◆ DLP® projector with high resolution
This  projector  is  compatible  with  SXGA+  signals, 
a l l ow i n g   h i g h   d e f i n i t i o n   p r o j e c t i o n .   I t   i s   a l s o 
compatible  with  two  different  types  of  user-
changeable  color  wheels  allowing  high  brightness 
or  rich  color  reproduction.  The  combination  of 
BrilliantColor
TM  and  the  rich  color  reproduction 
color  wheels  (supplied)  offer  a  more  true  color 
reproduction.  
						

							3
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
DLP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments.
Table of Contents
Features and Design . . . . . . . . . . . . . . . .2
Table of Contents   . . . . . . . . . . . . . . . . . . 3
To The Owner   . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . . . . . . . . . . . 5
Air Circulation  6
Installing the Projector in Proper Directions  7
Moving the Projector  8
Compliance . . . . . . . . . . . . . . . . . . . . . . . 9
Part Names and Functions  . . . . . . . . . .10
Front  10
Back  10
Terminals and Connectors  11
Side Control and Indicators  12
Side Control  12
Indicators  13
Remote Control  14
Remote Control Battery Installation  15
Remote Control Receivers and Operating Range  15
Wired Remote Control  15
Remote Control Code  16
Installation  . . . . . . . . . . . . . . . . . . . . . . 17
Lens Installation  17
Positioning Projector  17
Picture Level and Pitch Adjustment  17
Lens Shift Adjustment  18
Terminals of Projector  19
Connecting to Computer  20
Connecting to Video Equipment  21
Attaching the Cable Cover  22
Connecting the AC Power Cord  23
Basic Operation  . . . . . . . . . . . . . . . . . . 24
Turning On the Projector  24
Turning Off the Projector  25
How to Operate the On-Screen Menu  26
Menu Bar  27
Operating with Projector Control  28
Operating with Remote Control  30
Input Selection  . . . . . . . . . . . . . . . . . . . 32
Input   32
Computer Input Source Selection  33
Video Input Source Selection  34
Computer Input  . . . . . . . . . . . . . . . . . . 35
Computer System Selection  35
Auto PC Adjustment  36
Manual PC Adjustment  37
Image Level Selection  39
Screen Size Adjustment  40
Video Input  . . . . . . . . . . . . . . . . . . . . . . 42
Video System Selection  42
Image Level Selection  43
Screen Size Adjustment  44
Picture Image  . . . . . . . . . . . . . . . . . . . . 46
Image Adjustment  46
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting  49
Maintenance and Care . . . . . . . . . . . . .62
Filter Instructions  62
Replacing the Filter Cartridge  63
Resetting the Filter Counter  64
Resetting the Scroll Counter  64
Lamp Management  65
Lamp Replacement  66
Optional Color Wheel Installation  68
Cleaning the Projection Lens  69
Cleaning the Projector Cabinet  69
Warning Indicators  70
Appendix . . . . . . . . . . . . . . . . . . . . . . . . 71
Troubleshooting  71
Menu Tree  74
Indicators and Projector Condition  77
Compatible Computer Specifications  80
List of Picture in Picture  82
Technical Specifications  83
Optional Parts  84
Configurations of Terminals  85
PIN Code Number Memo  86
Dimensions  87
Serial Control Interface  88
How to adjust multiple screens  90 
						

							4
CAUTION: TO   R E D U C E   T H E   R I S K   O F   E L E C T R I C 
S H O C K ,  D O   N OT   R E M OV E   C OV E R   ( O R 
BACK)  .  NO  USER-SERVICEABLE  PARTS 
INSIDE  EXCEPT  LAMP  REPLACEMENT  .  
REFER  SERVICING TO  QUALIFIED  SERVICE 
PERSONNEL .
T H I S   SY M B O L   I N D I C AT E S   T H AT   DA N G E ROU S 
VOLTAGE  CONSTITUTING  A  RISK  OF  ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.
T H I S   SY M B O L   I N D I C AT E S   T H AT   T H E R E   A R E 
I M P O RTA N T   O P E R AT I N G   A N D   M A I N T E N A N C E 
INSTRUCTIONS  IN THE  OWNER’S  MANUAL  WITH 
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before installing and operating the projector, read this 
manual thoroughly.
The projector provides many convenient features and 
functions. Operating the projector properly enables you to 
manage those features and maintains it in good condition for 
many years to come.
Improper operation may result in not only shortening the 
product life, but also malfunctions, fire hazard, or other 
accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections and 
try the solutions in the “Troubleshooting” section in the 
back of this manual. If the problem still persists, contact the 
dealer where you purchased the projector or the service 
center.
CAUTION
Not  for  use  in  a  computer  room  as  defined  in  the 
Standard for the Protection of Electronic Computer/Data 
Processing Equipment, ANSI/NFPA 75.  
CAUTION ON HANGING FROM THE CEILING
  When  hanging  the  projector  from  the 
ceiling ,  clean  the  air  int ake  vents  and 
top  of  the  projector  periodically  with  a 
vacuum cleaner. If you leave the projector 
unclean  for  a  long  time,  the  cooling  fans 
can  be  clogged  with  dust,  and  it  may 
cause a breakdown or a disaster.
D O  NOT  SET  THE  PROJECTOR  IN  GREAS y, WET , OR 
SMOK y CONDITIONS  SUCH  AS   IN  A KITCHEN  TO 
PREVENT   A  BREAKDOWN  OR  A  DISASTER .   IF THE 
P R O J E C TO R  C O M E S  I N  C O N TAC T  W I T H  O I L  O R 
CHEMICALS , IT MAy BECOME DETERIORATED .
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE . Ne  peut  être  utilisé  dans  une  salle  d’ordinateurs  telle 
que  définie  dans  la  norme  ANSI/NFPA  75  Standard  for 
Protection  of  Electronic  Computer/Dat a  Processing 
Equipment. 
To The Owner
Safety Precaution
WARNING:  
l THIS APPARATUS MUST BE EARTHED  .
  l TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE .
–  This projector produces intense light from the projection lens. 
Do not stare directly into the lens, other wise eye damage could 
result. Be especially careful that children do not stare directly 
into the beam.
–  Install the projector in a proper position. Other wise it may 
result in a fire hazard.
–  Allowing the proper amount of space on the top, sides, and 
rear of the projector cabinet is critical for proper air circulation 
and cooling of the unit. The diagrams shown here indicates the 
minimum space required. If the projector is to be built into a 
compartment or similarly enclosed, these minimum distances 
must be maintained.
 –   Do not cover the ventilation slots on the projector. Heat build-
up can reduce the service life of your projector, and can also be 
dangerous.
–  If the projector is unused for an extended time, unplug the 
projector from the power outlet.
1.5’ (50cm) 1.5’ (50cm)
3.3’ (1m)
1 .
5’ (50cm)
SIDE and TOP REAR
The symbol mark and recycling systems described below 
apply to EU countries and do not apply to countries in other 
areas of the world.
Your product is designed and manufactured with high qual-
ity materials and components which can be recycled and/or 
reused.
The symbol mark means that electrical and electronic 
equipment, batteries and accumulators, at their end-of-life, 
should be disposed of separately from your household 
waste.
Note: 
If a chemical symbol is printed beneath the symbol mark, 
this chemical symbol means that the battery or accumula-
tor contains a heavy metal at a certain concentration. This 
will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: 
lead.
In the European Union there are separate 
collection systems for used electrical and 
electronic equipment, batteries and accumu-
lators.
Please, dispose of them correctly at your 
local community waste collection/recycling 
centre.
Please, help us to conserve the environment we live in!  
						

							5
All  the  safet y  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them  for 
later  use.    Unplug  this  projector  from  AC  power  supply 
before cleaning.  Do not use liquid or aerosol cleaners. Use a 
damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For  added  protection  to  the  projector  during  a  lightning 
storm,  or  when  it  is  left  unattended  and  unused  for  long 
periods  of  time,  unplug  it  from  the  wall  outlet. This  will 
prevent damage due to lightning and power line surges.
D o  n o t  ex p o s e  t h i s  u n i t  t o  r a i n  o r  u s e  n e a r  wa t e r. . .  fo r 
example, in a wet basement, near a swimming pool, etc...
D o   n o t   u s e   a t t a c h m e n t s   n o t   r e c o m m e n d e d   b y   t h e 
manufacturer as they may cause hazards.
Do  not  place  this  projector  on  an  unstable  cart,  stand,  or 
table.  The projector may fall, causing serious injury to a child 
or  adult,  and  serious  damage  to  the  projector.  Use  only  with 
a  cart  or  stand  recommended  by  the  manufacturer,  or  sold 
with  the  projector. Wall  or  shelf  mounting  should  follow  the 
manufacturer's  instructions,  and  should  use  a  mounting  kit 
approved by the manufacturers.
A n  a p p l i a n c e  a n d  c a r t  c o m b i n a t i o n 
s h o u l d  b e  m o v e d  w i t h  c a r e .  Q u i ck 
s t o p s ,  exc e s s i ve  fo r c e ,  a n d  u n eve n 
surfaces  may  cause  the  appliance  and 
cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are 
provided  for  ventilation,  to  ensure  reliable  operation  of  the 
equipment and to protect it from overheating.
The  openings  should  never  be  covered  with  cloth  or  other 
materials,  and  the  bottom  opening  should  not  be  blocked 
by  placing  the  projector  on  a  bed,  sofa,  rug,  or  other  similar 
surface. This  projector  should  never  be  placed  near  or  over  a 
radiator or heat register.
This  projector  should  not  be  placed  in  a  built-in  installation 
such as a book case unless proper ventilation is provided.
Never  push  objects  of  any  kind  into  this  projector  through 
cabinet  slots  as  they  may  touch  dangerous  voltage  points 
or  short  out  parts  that  could  result  in  a  fire  or  electric  shock.  
Never spill liquid of any kind on the projector.
Do  not  install  the  projector  near  the  ventilation  duct  of  air-
conditioning equipment.This  projector  should  be  operated  only  from  the  type  of 
power  source  indicated  on  the  marking  label.  If  you  are  not 
sure of the type of power supplied, consult your authorized 
dealer or local power company.
Do  not  overload  wall  outlets  and  extension  cords  as  this 
can  result  in  fire  or  electric  shock.  Do  not  allow  anything  to 
rest  on  the  power  cord.  Do  not  locate  this  projector  where 
the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening 
or  removing  covers  may  expose  you  to  dangerous  voltage 
or  other  hazards.  Refer  all  ser vicing  to  qualified  ser vice 
personnel.
Unplug this projector from wall outlet and refer servicing to 
qualified service personnel under the following conditions:
a. 
When the power cord or plug is damaged or frayed.
b.  If liquid has been spilled into the projector.
c.  If the projector has been exposed to rain or water.
d.  If  the  projector  does  not  operate  normally  by  following 
the  operating  instructions.  Adjust  only  those  controls 
t h a t  a r e  c o v e r e d  b y  t h e  o p e r a t i n g  i n s t ru c t i o n s  a s 
improper  adjustment  of  other  controls  may  result  in 
d a m a g e  a n d  w i l l  o ft e n  r e q u i r e  ex t e n s i ve  wo r k  by  a 
qualified  technician  to  restore  the  projector  to  normal 
operation.
e.  If  the  projector  has  been  dropped  or  the  cabinet  has 
been damaged.
f.   W h e n  t h e  p r o j e c t o r  e x h i b i t s  a  d i s t i n c t  ch a n g e  i n 
performance-this indicates a need for service.
When  replacement  parts  are  required,  be  sure  the  service 
technician  has  used  replacement  parts  specified  by  the 
manufacturer  that  have  the  same  characteristics  as  the 
original  part.  Unauthorized  substitutions  may  result  in  fire, 
electric shock, or injury to persons.
Upon  completion  of  any  service  or  repairs  to  this  projector, 
a s k  t h e  s e r v i c e  t e ch n i c i a n  t o  p e r fo r m  r o u t i n e  s a fe t y 
checks  to  determine  that  the  projector  is  in  safe  operating 
condition.
Safety Instructions
NOTE FOR CUSTOMERS IN THE US
Hg  LAMP(S)  INSIDE THIS PRODUCT  CONTAIN MERCURY  
AND  MUST  BE  RECYCLED  OR  DISPOSED  OF  ACCORDING 
TO LOCAL, STATE OR FEDERAL LAWS . 
						

							6
Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect 
it from overheating, these openings must not be 
blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
– Do not put any flammable object or spray can near 
the projector, hot air is exhausted from the air vents.
–  Keep the exhaust vent at least 3’ (1 m) away from 
any objects.
–  Do not touch peripheral parts of the exhaust vent, 
especially screws and metallic parts. These areas will 
become hot while the projector is being used.
–  Do not put anything on the cabinet. Objects put on 
the cabinet will not only get damaged but also may 
cause fire hazard by heat.
–   Do not cover vents with papers or other materials.
–   Make sure that there are no objects under the 
projector. An object under the projector may prevent 
the projector from taking cooling air through bottom 
vent.
Cooling fans are provided to cool down the projector. 
The fans’ running speed is changed according to the 
temperature inside the projector.
Air Circulation
Safety Instructions
Safety Instructions
EXHAUST VENT
AIR INTAKE VENT
The projector uses a lamp which generates 
significant heat. The cooling fans and air vents are 
provided to dissipate the heat by drawing air into the 
housing and the filter is located in the intake vents to 
prevent dust from getting inside of the projector.
In order to care for the projector appropriately, 
regular cleaning is required. Remove any dirt or dust 
that has accumulated on the projector.
If the projector reaches a time set in the timer 
setting, a Filter replacement icon (Fig. 1) appears on 
the screen and WARNING FILTER indicator on the 
top panel lights up (see below), indicating that the 
filter replacement is necessary.
If the projector detects that the filter is clogged and 
no scroll is left in the filter cartridge, a Filter cartridge 
replacement icon (Fig. 2) appears on the screen and 
WARNING FILTER indicator on the top panel lights 
up (see below). Stop using the projector immediately 
and replace the filter cartridge.
Blocking the air vents and leaving the projector 
uncleaned for a long time may not only damage the 
projector and may require costly repairs but may also 
cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” 
on page 61 and “Maintenance and Care” on pages 
62–64.
Damages to the projector caused by using an 
uncleaned filter or improper maintenance will 
void the warranty on the projector
 .
IMPORTANT!
Filter Maintenance!!
Top Panel
WARNING FILTER
indicatorFig .1   Filter replacement icon
Fig .2    
Filter cartridge replacement 
icon
It is recommended to install a filter cartridge, 
although the projector can be operated without a 
filter . 
Do not remove or install the filter cartridge while 
the projector is running . 
						

							7
Safety Instructions
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in 
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the 
horizontal plane.
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not roll the projector more 
than 20 degrees from side to 
side. 
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted 
properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty 
on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit 
or installation of the ceiling mount kit in an improper location.
CAUTION ON CEILING MOUNTING
2020
Do not put the projector 
on either side to project an 
image.
10 10
10 10
In upward projection, do 
not tilt the projector over 10 
degrees right and left.
In downward projection, do 
not tilt the projector over 10 
degrees right and left.
✔Note:
•To inverse or reverse the image, set the ceiling function to “On.” (pp.41, 45)
•The projector cannot be operated at an altitude above 3,000 meters. 
						

							8
Moving the Projector
  CAUTION IN CARRyING OR 
TRANSPORTING THE PROJECTOR
–  Do not drop or bump the projector, other wise 
damages or malfunctions may result.
–  When carrying the projector, use a suitable carrying 
case.
–  Do not transport the projector by courier or any 
other transport service in an unsuitable transport 
case. This may cause damage to the projector. For 
information about transporting the projector by 
courier or any other transport service, consult your 
dealer.
–  Do not put the projector in a case before it is 
cooled enough.
–  Do not transport the projector with a replacement 
lens installed.
Safety Instructions
Retract the adjustable feet to prevent damage 
to lens and cabinet. For safety, holding the 
projector on both sides by 2 or more people is 
recommended to move the projector because 
the projector is heavy. When moving the 
projector by one person from necessity, hold 
the handle carefully. Moving it improperly may 
result in damage of cabinet or person's injury.How to move the projector by one person
When moving the projector by one person, grip 
handles and carry it with lens side up. Then, lay 
it down on the correct position. 
						

							9
AC Power Cord for the United Kingdom:
 This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin 
face  of  the  plug.  Should  the  fuse  need  to  be  replaced,  an  ASTA  approved  BS  1362  fuse  must  be  used  of  the 
same  rating,  marked  thus 
A S A.  If  the  fuse  cover  is  detachable,  never  use  the  plug  with  the  cover  omitted.  If  a 
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. 
red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
  If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
  The end of the flexible cord should be suitably prepared and the correct plug fitted.
 WARNING: A  PLUG WITH  BARED  FLEXIBLE  CORD  IS  HAZARDOUS  IF  ENGAGED  IN A  LIVE  SOCKET 
OUTLET  .
 
The Wires in this mains lead are coloured in accordance with the following code:
    Green-and-yellow ············· Earth
    Blue ·················\
················ Neutral\
    Brown ··················\
············ Live
  As  the  colours  of  the  wires  in  the  mains  lead  of  this  apparatus  may  not  correspond  with  the  coloured  markings 
identifying the terminals in your plug proceed as follows:
  The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the 
letter E or by the safety earth symbol 
 or coloured green or green-and-yellow.
  The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured 
black.
 The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured 
red.
 WARNING: THIS APPARATUS MUST BE EARTHED  .
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC  Power  Cord  used  in  the  United  States  and  Canada  is  listed  by  the  Under writers 
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug.  This is a safety feature to be sure 
that  the  plug  will  fit  into  the  power  outlet.  Do  not  try  to  defeat  this  safety  feature. 
Should you be unable to insert the plug into the outlet, contact your electrician.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASIL y ACCESSIBLE .
AC Power Cord Requirement
Compliance
Federal Communications Commission Notice
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital  device, 
pursuant  to  Part  15  of  FCC  Rules. These  limits  are  designed  to  provide  reasonable  protection  against 
harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment. This  equipment 
generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance 
with  the  instruction  manual,  may  cause  harmful  interference  to  radio  communications.  Operation  of 
this equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense.
Do  not  make  any  changes  or  modifications  to  the  equipment  unless  other wise  specified  in  the 
instructions.  If  such  changes  or  modifications  should  be  made,  you  could  be  required  to  stop  operation 
of the equipment.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which 
case the user may be required to take adequate measures. 
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian ICES-003.
GROUND 
						

							10
u
e r t
Front
o
q wyi
Back
q	 Projection Lens (Option)
w	 Indicators
e  Infrared Remote Receiver (Front)
r	 Handle
t  Adjustable Feet
y	Side Control
u 
Terminals and Connectors
i  Main On/Off Switch
o  Power Cord Connector
!0  Lamp Cover
!2
 CAUTION
Hot air is exhausted from the exhaust 
vent. Do not put heat-sensitive objects 
near this side.
Part Names and Functions
!0
✽Kensington Security Slot This slot is for a Kensington lock used to 
deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands 
Corporation.
✽
!1	Infrared Remote Receiver (Rear)
!2	Air Intake Vent
!3  Air Filter Cover
!4  Exhaust Vent
t
!1
!4
!3