Eizo Coloredge Cg211 Users Manual

This function allows you to select the best suited mode for screen displ\
ay.
 
To select the Mode
Directly pressing the Left or Right button allows you to select the best\
 suited mode for 
screen display from 3 FineContrast modes; sRGB, Custom and CAL. Color se\
ttings 
each mode can be adjusted by using the  menu of the ScreenManager\
.
 
Exit
Press the Enter button to exit the menu. 
 
FineContrast Mode
Selectable FineContrast modes are as follows.
sRGB To display the screen images based on those...

Color Adjustment of the Mode Settings
,  and  settings can be adjusted on the \
FineContrast menu. Select the desired function icon with the Up/Down Con\
trol buttons 
and adjust with the Left/Right Control buttons. (Setting(s) of  and/or 
 is defined as standard default in some modes.
 
Detailed Adjustments
The detailed color settings of each mode can be adjusted by using the  menu 
of the ScreenManager.
 
* CAL mode can be adjusted only by Calibration Software ColorNavigator\
.
Adjustment Lock
Use...

[To unlock]
Switch off the monitors power by the power button on the front control \
panel, then 
hold Down the Auto Adjustment button once again and turn the power back \
on.
 
Off Timer
The off timer function causes the monitor to automatically enter a power\
 off state after 
a predetermined amount of time has lapsed. This function was created to \
reduce 
afterimage characteristics that are particular to LCD monitors when the \
monitor screen 
is left on for a long period without use.
[Procedure](1)...

*The off timer function works while the PowerManager is active, but there\
 is no 
advance notice before the monitors power is switched off.
Power Indicator setting
Light off the power indicator. This function is available for the multip\
le panels settings.
[Procedure]
(1) Select  in the ScreenManager  menu.
(2) Select Disable.
EIZO Logo Appearing Function
When switching on the power button on the front control panel, the EIZO \
logo is 
displayed for a while. If you desire to display or undisplay this...

The monitor displays the digital input image correctly based on its pre-\
setting 
data.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing scr\
een 
flickering and also for adjusting the screen to its proper position. The\
re is only one 
correct position for each display mode. It is also recommended to use th\
e 
ScreenManager function when first installing the monitor or whenever cha\
nging the 
system. For convenience, an easy set-up program installed on the utility\...

2.Run the Screen Adjustment Program.
Having read the Readme.txt file, run the Screen Adjustment Program i\
n the 
enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by \
the wizard 
guide. (If using the Windows, the program can be directly run from the \
menu screen of 
the CD-ROM.)
*If the users operating system has no utility disk (e.g. OS/2), we rec\
ommend 
setting the desktop pattern to that as shown in the diagram on the follo\
wing.
 
3.Adjust by using  menu in the...

(2)Horizontal bars appear on the screen.
=>
Use the  adjustment.
Select the  and eliminate the horizontal flickering, blurring or \
bars by 
using the Right and Left buttons.
 
* Horizontal bars may not completely disappear from the screen depending o\
n the 
PC.
 
(3) The screen position is incorrect.
=>
Use the  adjustment.
The correct displayed position of the monitor is decided because the num\
ber and 
the position of the pixels are fixed. The  adjustment moves th\
e image 
to the correct...

(4)Screen image is smaller or larger than the actual screen images.
=>
Use the  adjustment.
Adjustment is needed when the input signal resolution and the resolution\
 now 
being displayed are different. 
Select  and confirm if the resolution now being displayed is\
 the 
same as the input resolution. If it is not, adjust the vertical resoluti\
on using the 
Up and Down button and adjust the horizontal resolution using the Right \
and 
Left buttons.
 
4.Adjust the output signal range (Dynamic Range) of...

The lower resolutions are enlarged to full screen automatically. Using t\
he  function in the  menu enables to change the screen size.
1.Enlarge the screen size when displaying a low resolution.=>
Select the .
Select the  in the others menu and select the screen size b\
y using the Up 
and Down buttons.
Menu Function
Full Displays the picture on the screen in full, irrespective of the 
pictures resolution. Since the vertical resolution and the 
horizontal resolution are enlarged at different rates, some...

* is disabled when the screen is displayed in the following 
resolutions.
 
l     1600 x 1200 
l     The image size is doubled both in horizontally and vertially to (i.e. 1\
600 
x 1200 enlarged from 800 x 600) provide clear focus which does not 
require this function.
 
3.Set the brightness of the black area surrounding the displayed  image.
=>
Set the .
In the Enlarged mode or Normal mode, the outer area (border) is us\
ually black.
Select  in the  menu and adjust by using the R\
ight and Left...