Eizo Coloredge Cg223w Users Manual

11Chapter 1  Introduction
Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main Menu	Item	Adjusting/Setting
ColorBrightness“2-3. Color Adjustment” (page 18
)
Contrast
Temperature
Gamma
Advanced 
SettingsHue
Saturation
Outline Enhancer
Gain
Black Level
6 Colors
Color Reset “3-8. Restoring the Default Setting”  
(page 28
)
Screen
Screen Size “2- 4. Displaying Lower Resolutions”  
(page 24
)
Analog 
AdjustmentAuto Adjustment “2-2. Displaying Screen Correctly”...

12Chapter 2  Adjusting Screen
Chapter 2 Adjusting Screen
2-1. Setting Screen Resolution
Compatible Resolutions/Frequencies
The monitor supports the following resolutions.
Analog Input
Resolution Applicable signal Frequency Dot Clock CG223W CG243W
640×480 VGA60Hz
170MHz (Max.) √ √
720×400 VGA TEXT 70Hz
√ √
800×600 VESA60Hz
√ √
1024×768 VESA60Hz
√ √
1024×768 VESA~ 75Hz
√―
1024×768 VESA85Hz
√―
1152×864 VESA75Hz
√―
1280×960 VESA60Hz
√ √
1280×1024 VESA60Hz
√ √
1600×1200 VESA60Hz ―
√
1680×1050*
1VESA CVT 60Hz...

13Chapter 2  Adjusting Screen
Setting Resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to 
change the resolution, follow the procedure below.
● Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. 
F
 rom the displayed menu, click “Screen resolution”.
3.
 
O
 n the "Screen Resolution" dialog, select the monitor .
4.
 
C
 lick "Resolution" to select the desired resolution.
5.
 
C
 lick the [OK] button....

14Chapter 2  Adjusting Screen
2-2. Displaying Screen Correctly
Digital Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor. 
When performing advanced adjustment, see “2-3 Color Adjustment” (page 18) and subsequent pages.
Analog Input
Attention
• Wait 30 minutes or more from monitor power on before starting adjustments. 
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
The monitor screen adjustment is used to...

15Chapter 2  Adjusting Screen
2 Prepare the display pattern for the analog display adjustment.
Windows
1. 
L
 oad the “EIZO LCD Utility Disk” to your PC.
2.
 
S
 tart the “Screen Adjustment Utility” from the startup menu. If it cannot be started, open the
screen adjustment pattern files.
Other than Windows
Download the "Screen adjustment pattern files" from our site: http://www.eizo.com
NOTE
• For details and instructions on opening the “Screen adjustment pattern files”, refer to “Readme.txt”...

16Chapter 2  Adjusting Screen
4 Perform advanced adjustments for the following using the  menu of the .
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
Procedure
1.
 
C
 hoose  from the  menu, and press 
.
2.
 
A

djust the clock with 
 or .
Press  slowly so as not to miss the adjustment point.
3. Press  to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering 
or blurring.
● Remove...

17Chapter 2  Adjusting Screen
5 Adjust the color gradation.
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. 
D
 isplay Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the screen 
adjustment pattern files.
2. Choose  from the  menu, and press .
The color gradation is adjusted automatically.
When the auto adjustment is completed, a message appears. Select “OK”...

18Chapter 2  Adjusting Screen
2-3. Color Adjustment
● To select the display mode (Color Mode)
Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.
Color Mode
Mode Purpose
1-Custom Available for the color settin\lgs according to \four preference.
2-sRGB Suitable for color matching w\lith sRGB compatible peripherals.
3-EBU Suitable for reproducing the\l color gamut and gamma as se\lt forth b\f EBU (European 
Broadcasting Union\l) standards.
4-REC709 Suitable for...

19Chapter 2  Adjusting Screen
● To perform advanced adjustments
The  menu of the Adjustment menu allows you to set and save the independent color adjustment 
for each mode.
Attention
• Wait 30 minutes or more from monitor power on before starting the color adjustment. (Allow the monitor to warm up for at least 30 minutes before making adjustments.)
•
 
P
 erform the range adjustment first when adjusting color for analog input signals. 
(Refer to “To adjust color gradation automatically” on page 17 ).
•...

20Chapter 2  Adjusting Screen
● To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD 
back panel).
Adjustable range: 0 to 100%
Procedure
1. 
C
 hoose  from the Adjustment menu, and press 
.
2.
 
C

hoose  from the  menu, and press 
.
3.
 
A

djust the brightness with 
 or .
4.
 
P

ress 
 to exit the adjustment.
NOTE
• You can also adjust the brightness using  and .
•
 
W

hen your feel the image is bright even if...