Eizo Coloredge Cg301w Users Manual

Important
Please read this User’s Manual carefully to 
familiarize yourself with safe and effective 
usage. 
FCC Declaration of Conformity ..................................31
Hinweise zur Auswahl des richtigen 
Schwenkarms für Ihren Monitor / 
Hinweis zur Ergonomie  ..............................................32
SAFETY SYMBOLS  ....................................................2
PRECAUTIONS  .....................................................3
1. Introduction...


SAFETY SYMBOLS

SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure  to  abide  by  the  information  in  a WARNING  may  result  in  serious  injury  and  can 
be life threatening.
CAUTION
Failure  to  abide  by  the  information  in  a  CAUTION  may  result  in  moderate  injury  and/or 
propertyor product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2007-2009 EIZO NANAO...

PRECAUTIONS


PRECAUTIONS
IMPORTANT!
•	This product has been adjusted specifically for use in the region to w\
hich it was originally shipped. 
If operated outside the region to which it was originally shipped, the p\
roduct may not perform as 
stated in the specifications. 
This product is designed for use in Japan only and cannot be used in any\
 other countries.
•	To ensure personal safety and proper maintenance, please read this sectio\
n and the caution statements 
on the unit (refer to the...


PRECAUTIONS

 WARNING
Place the unit at the strong and stable place.
A  unit  placed  on  an  inadequate  surface  may  fall  and  result  in  injury  or  equipment 
damage.
If  the  unit  falls,  disconnect  the  power  immediately  and  ask  your  dealer  for  advice. 
Do  not  continue  using  a  damaged  unit.  Using  a  damaged  unit  may  result  in  fire  or 
electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.• 
Do...

PRECAUTIONS


 WARNING
When  attaching  an  arm  stand,  please  refer  to  the  user's  manual  of  the  arm 
stand and install the unit securely.
Not  doing  so  may  cause  the  unit  to  come  unattached,  which  may  result  in  injury  or 
equipment  damage.  When  the  unit  is  dropped,  please  ask  your  dealer  for  advice. 
Do  not  continue  using  a  damaged  unit.  Using  a  damaged  unit  may  result  in  fire  or 
electric  shock.  When  reattaching  the  tilt  stand,  please...


PRECAUTIONS
Notice for this monitor
In  order  to  suppress  the  luminosity  change  by  long-term  use  and  to  maintain  the  stable  luminosity,  use  of  a 
monitor in lower brightness is recommended.
The  LCD  panel  is  manufactured  using  high-precision  technology.  However,  missing  pixels  or  lit  pixels  may 
appear on the LCD panel, this is not malfunction. Percentage of effective pixels : 99.9994% or higher.
The  backlight  of  the  LCD  panel  has  a  fixed  life  span.  When...

1. Introduction

1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
• 
29.8 inch class wide screen format LCD
•  
Wide color gamut of 97% of Adobe RGB
•  
WQXGA (2560 × 1600) display compliant 
•  
HDCP signal (SIGNAL2) compliant
•  
Dual-display compliant by introducing dual-input system (DVI-D × 2 c\
onnectors)
•  
DVI digital input (TMDS) compliant
•  
Horizontal scan frequency: 26 - 100 kHz
•  
Vertical scan frequency: 29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 -...


1. Introduction

1-. Buttons and Indicators
1. Input Signal Selection button 
2. Mode button 
3. Enter button 
4. Control buttons (Left, Down, Up, Right) 
5. Power button 
6. Power indicator 
Indicator statusOperation status
BlueThe screen is displayed
Flashing blue (2 times for each)When the timer is set for ColorNavigator, notifies that a recalibration is 
required (for CAL mode or EMU mode)
OrangePower saving
OffPower off
*ScreenManager® is an EIZO's nickname of the Adjustment menu....

1. Introduction


1-. Utility Disk
An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the 
disk contents and the overview of the application software programs.
Disk contents and software overview
The disk includes software programs for adjustment and User’s Manual. Refer to "Readme.txt" or the 
"read me" file on the disk for software startup procedures or file a\
ccess procedures.
ItemOverviewFor WindowsFor Macintosh
A...

10
2. Installation

. Installation
-1. Environmental Settings
Depending upon your operating environment, it may be necessary to set th\
e frequency that corresponds 
to your graphics board. If you install it for the first time or change\
 environment, set the monitor.
NOTE
• 
Factory default settings are for single display mode and Dual Link.
•  
We recommend using ColorNavigator with single display mode in landscape o\
rientation. 
•  
Refer to the manual of the graphics board.
• These...