Electrolux Ewb 105405 User Manual

EWB 105405 W................................................ .............................................
ENWASHING MACHINE USER MANUAL 2
FRLAVE-LINGE NOTICE D'UTILISATION 14
 

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information   2
Product description   3
Personalisation  4
How to run a wash cycle?   5
Daily use   5
Washing programmes   7
Care and cleaning   8Operating Problems   9
Detergents and Additives   10
Technical Specifications   11
Consumption values   11
Installation  11
Environment concerns   13
Subject to change without notice.
 SAFETY INFORMATION
Please read these points carefully before in-
stalling and using...

• Unplug the appliance.
• Replace the inlet hose and drain hose.
This way, the water remaining in the hoses
will be drained away, avoiding any ice for-
mation which would damage your appli-
ance.
Before turning your appliance on again, en-
sure that it is installed in an area where the
temperature will not fall below freezing.
USE
• Your appliance is intended for normal do-
mestic use. Do not use the appliance for
commercial or industrial purposes or for
any other purpose.
• Refer to the instructions on...

CONTROL PANEL
123456
1. Programme selector
2. Pushbuttons and their functions
3. Display
4. Add washing light
5. Start/Pause pushbutton
6. Time manager pushbuttons
THE SYMBOLS
12 34 5
1Time manager
2Temperature
3Child safety
4Cycle running :  Prewash/Wash, 
Rinse,  Drain,  Spin
5Length of cycle or Timer delay count-
down
DISPENSER BOX
 Prewash Wash Softener (do not fill above the MAX
symbol 
M )
PERSONALISATION
CHILD SAFETY
This option provides two types of locking :
• if the option is activated after...

To activate child safety, turn appliance on
and press “Extra rinse” 
 and “Delay start”
 simultaneously until the confirmation
symbol 
 shows on in the display. The ap-
pliance memorises the selection of this op-
tion. To deactivate child safety, repeat the
process.
AUDIBLE SIGNAL
When the audible signal is activated, it
sounds when a button is pressed, at the
end of the programme, to indicate a fault.To deactivate, turn appliance on and press
“Prewash” 
 and “Extra rinse”  simulta-
neously until the...

Night cycle By selecting this function the machine will
not drain the water of the last rinse and all
spinning phases will be suppressed, so as
not to wrinkle the laundry. This washing cy-
cle is very quiet and it can be selected at
night or in times with a more economical
power rate.
At the end of the programme, if you have
selected “Rinse hold” 
 or “Night cycle” , you then need to select a “Spin”  or
“Drain” 
 programme to finish the cycle
and empty the water.
SELECTING OPTIONS
You must select the...

come on green. It is normal for the pro-
gramme selector to remain stationary dur-
ing the cycle. The symbol for the current
cycle and the remaining time appear on the
display. If a delayed start has been selec-
ted, the countdown appears on the display.
WARMING UP
During the cycle, the 
 symbol comes on
when the appliance is reaching the right
temperature.
INTERRUPTING A PROGRAMME
Adding washing
When the “Add washing” light 
 is on, you
can add washing by proceeding as follows.
Press the “Start/Pause”...

Programme / Type of washingLoadAvailable options
 Lingerie (cold - 40°) : For very delicate
items, like lingerie.
Max. spin speed: 900 rpm1,0 kgNight cycle, Rinse hold, Delay start
 Rinse : Hand washed items can be
rinsed in this programme.
Max. spin speed: 1000 rpm5,5 kgNight cycle, Rinse hold, Extra rinse,
Delay start
 Drain : Runs an empty cycle after a Rinse
hold (or Night cycle ).5,5 kg 
 Spin : A spin cycle from 700 to 1000 rpm
after a Rinse hold (or Night cycle).5,5 kgDelay start
 Eco1) (40° -...

DRAIN FILTER
Regularly clean the drain filter which is loca-
ted at the bottom of the drum :
1
2
4
356
7
8
9
10
CLACK
11CLACK
WATER INLET FILTERS
To clean, proceed as follows :
 
OPERATING PROBLEMS
Numerous checks were carried out on your
appliance before it left the factory. Howev-
er, should you notice a malfunction, pleaserefer to the sections below before contact-
ing the after-sales service.
ProblemsCauses
The appliance doesn’t
start or doesn’t fill :• the appliance isn’t plugged in correctly, the...

ProblemsCauses
You have found water
around the appliance :• too much detergent has caused foam to overflow,
• the detergent is unsuitable for machine washing,
• the drainage U-piece isn’t attached correctly,
• the water inlet hose is leaking.
The washing results are
not satisfactory :• the detergent is unsuitable for machine washing,
• there is too much laundry in the drum,
• the wash cycle is unsuitable,
• there isn’t enough detergent.
The appliance vibrates,
is noisy :• all packaging have not been...