Electrolux Ewf 106110 W User Manual

something not wo\f\bing electrolux47
Mal\buncti\fnP\fssible causeS\fluti\fn
The machine vibrates or is
noisy:The transit bolts and
packing have not been
removed.
The support feet have not
been adjusted.
The laundry is not evenly
distributed in the drum.
Maybe there is very little
laundry in the drum.
Check the correct
installation of the appliance.
Check the correct levelling
of the appliance.
Redistribute the laundry.
Load more laundry.
Spinning starts late or the
machine does not spin:The electronic...

48  electrolux  \fo\bething not working
If you are unable to identify or solve the
problem, contact our service centre.
\fefore telephoning, make a note of the
model, serial number and purchase date
of your machine: the Service Centre will
require this information.
Technical data
Dimensions Width 60 cm
8\b cm
63 cm
Height
Depth
Water supply pressure Minimum 0,0\b MPa
0,8 MPa
Maximum
Cotton
Synthetics
Delicates
Woollens and handwashMaximum Load 6 kg
3 kg
3 kg
2 kg 
MaximumSpin Speed1000 rpm
Electrical...

Consumption valu\fs electrolux49
(*) The “Cottons 6\b° and option Eco 
selected” is the reference programme
for the data entered in the energy
label, in compliance with EEC 92/75
standards.The consumption data shown on this
chart is to be considered purely
indicative, as it may vary depending on
the quantity and type of laundry, on the
inlet water temperature and on the
ambient temperature. It refers to the
highest temperature for each wash
programme.
Consumption valu\fs
Programm\f duration 
(in...

\f0  electrolux  installation
Installation
Transit security bars
Before starting the machine up,  the
transport security  bars must be
removed as follows:
You are advised to keep all the transport
security bars. In case the appliance has
to be transported again.
—f. Unscrew and remove the three rear screws by means of a key.
2. Open the porthole and remove the poliesthyrene block fitted on the door seal.
3. Place the machine in an upright position and remove the three plastic
bolts.
4. Plug the 3 holes...

Electrical connection
This machine is designed to operate on
a 230 V, single—Óphase, 50 Hz supply.
Check that your domestic electrical
installation can take the maximum load
required (2.—f kW), also taking into
account any other appliances in use.
The applicable rules for electrical
security require an adequate
earthing. The plug of the appliance
is provided with such a device.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution....

\f2electrolux environment concerns
Environment concerns
Packaging materials
The
materials marked with the symbol 
are recyclable.
>PEPSPP

guarantee conditionselectrolux  \f3
V  Appliances found to be in use within a
commercial environment, plus those
which are subject to rental
agreements.
V  Products of Electrolux manufacturer that are not marketed by Electrolux
Service and Spare Parts
In the event of your appliance requiring
service, or if you wish to purchase spare
parts, please contact your local Service
Force Centre by telephoning
Your telephone call will be automatically
routed to the Service Force Centre
covering your postcode...

\f4electrolux customer service centres
Customer Service Centres
Should you need further assintance please contact your local Customer Service
Centre
Centro de Asistencia TOcnica
En caso de necesitar una mayor ayuda, por favor contacte con su Centro de
Asistencia TOcnica
126.29\b1.\b\b.qxd:1\b2981\8520.qxd  19/01/10  1\84:2\f  Página 54
DownloadedmFrommWashingMachinezManualcommManuals 

126.29\b1.\b\b.qxd:1\b2981\8520.qxd  19/01/10  1\84:2\f  Página 55
DownloadedmFrommWashingMachinezManualcommManuals 

—f26.293—f.33
126.29\b1.\b\b.qxd:1\b2981\8520.qxd  19/01/10  1\84:2\f  Página 56
DownloadedmFrommWashingMachinezManualcommManuals