Electrolux Ewf 10771 W User Manual

user manual
Washing Machine
EWF 10771 W
 

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information    2
Product description    4
Control panel    5
First use    7
Personalisation    8
Daily use    8
Helpful hints and tips    11
Washing programmes    13Care and cleaning    16
What to do if…    20
Technical data    22
Consumption values    22
Installation    23
Electrical connection    26
Environment concerns    26
  Subject to change without notice
 Safety information
Important! Read carefully &...

Installation
• This appliance is heavy. Care should be
taken when moving it.
• When unpacking the appliance, check that
it is not damaged. If in doubt, do not use it
and contact the Service Centre.
• All packing and transit bolts must be re-
moved before use. Serious damage can
occur to the product and to property if this
is not adhered to. See relevant section in
the user manual.
• After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not...

Product description
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows total
use of detergent and reduces water consumption so saving energy.
12
3
4
5
1Detergent dispenser drawer
2Control panel
3Door opening handle
4Drain pump
5Adjustable feet
4  electrolux
 

Detergent dispenser drawer
 Compartment for detergent used for pre-
wash and soak phase or for stain remover
used during the stain action phase (if availa-
ble). The prewash and soak detergent is
added at the beginning of the wash pro-
gramme. The stain remover is added during
the stain action phase.
 Compartment for powder or liquid deter-
gent used for main wash. If using liquid de-
tergent pour it just before starting the pro-
gramme.
 Compartment for liquid additives (fabric
softener, starch).
Follow...

Spin Reduction
By pressing this button you can change the
spin speed of the selected programme.
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the
machine will perform some additional rinses
in some programmes. On cotton pro-
grammes the maximum spin speed is re-
duced automatically.
Extra Rinse
This appliance is designed for saving energy.
If it necessary to rinse the laundry using an
extra quantity of water...

To empty out the water, please read the
paragraph «At the end of the programme».
7.5: Option icons.
•
Extra Rinse 
,
•
Easy Iron 
,
•
Sensitive 
 (if available).
7.6: Child safety lock 
 (see «First Use»
paragraph).
7.7: Soil degree icons
•
Intensive 
•
Normal/Daily 
•
Light/Quick 
•
Super Quick 
7.8:
•
Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample 2.05). The duration is calculated au-
tomatically on the basis of the maximum...

Personalisation
Acoustic signals
The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 4 and 5 buttons simultane-
ously for about 6 seconds, the acoustic sig-
nal is deactivated (except if there is a fault).
By pressing these 2 buttons again, the
acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appli-
ance unattended and not to worry that chil-
dren might be injured by or...

Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatically
select the maximum spin value provided for
the programme you have chosen. You can
change these values by operating the corre-
sponding buttons. The green pilot light of the
button 8 starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
«O» to reset...

1. Set the washing machine to PAUSE by
pressing button 8.
2. Press button 6 once until the symbol 0’ is
displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with
DRAIN programme.
Start the programme by pressing button
8
To start the selected programme, press the
button 8, the green pilot light of the button
8 stops blinking.
To interrupt a programme which is running,...