EMachines E192hq User Guide

							
www.emachines.com
17
Environmental information
Recycling
The product you have purchased contains extracted natural resources that have been used in the manufacturing process.  This product 
may contain substances known to be hazardous to the environment or to human health.
To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, eMachines prov ides 
the following information on how you can responsibly recycle or reuse most of the materials in your “end of life” product.
Waste Electrical and Electronic Equipment (commonly known as WEEE) should never be disposed of in the municipal waste 
stream (residential garbage collection).  The “Crossed-Out Waste Bin” label affixed to this product is your reminder to 
dispose of your “end of life” product properly.
Substances such as glass, plastics, and certain chemical compounds are highly recoverable, recyclable, and reusable.  You 
can do your part for the environment by following these simple steps:
■When your electrical or electronic equipment is no longer useful  to you, “take it back” to your local or regional waste collection 
administration for recycling.
■In some cases, your “end of life” product may be “traded in” for credit towards the purchase of new eMachines equipment.  Call 
eMachines to see if this program is available in your area.
■If you need further assistance in recycling, reusing, or trading in your “end of life” product, you may contact us at the Custo mer 
Care number listed in your product’s user guide and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving featu res of 
this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was deliv ered in, 
and by disposing of or recycling used batteries properly.
With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize t he 
use of landfills for the disposal of “end of life” products, and generally improve our quality of life by ensuring that potenti ally 
hazardous substances are not released into the environment and are disposed of properly.
For additional recycling information specific to your area, please go to 
Regulatory compliance statements
United States of America
Mercury WarningLamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state, 
or federal laws.Hg
www.acer-group.com
 
						

							
18
Canada
Industry Canada (IC) Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio 
interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques  de 
Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
 
 
 
 
 
 
   
Federal Communications Commission 
Declaration of Conformity 
 
 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device ma y not cause harmful interference, and (2) 
this device must accept any interferen ce received, including interference that may 
cause undesired operation.   
The following local Manufacturer /Importer  is responsible for this declaration: 
 
 
Product: 
18.5 &20” LCD Monitor 
 
Model Number:   E182H; E192HQ; E202H 
 
SKU Number:  E182H xxx; E192HQ xxx; E202H xxx   
(“x” = 0~9, a ~ z, A ~ Z or Blank) 
 
Name of Responsible Party:  Acer America Corporation 
 
Address of Responsible Party:  333 West San Carlos St. 
  San Jose, CA 95110 
  U. S. A. 
 
Contact Person:  Acer Representative 
 
Phone No.:  254-298-4000 
 
Fax No.:  254-298-4147 
 
www.emachines.com
 
						

							
19
Trademark acknowledgments
9
 
 
 
                  Acer Incorporated 
  8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih 
Taipei Hsien 221, Taiwan
 
 
 
           
Declaration of Conformity 
 
We,  
Acer Incorporated
 
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan 
 
Contact Person: Mr. Easy Lai 
Tel: 886-2-8691-3089 Fax: 886-2-8691-3120 
E-mail:  [email protected]
 
 
Hereby declare that:   
Product:    18.5 &20” LCD Monitor 
Trade Name:   emachines 
Model Number:   E182H;E192HQ;E202H 
SKU Number:  E182H xxx; E192HQ xxx
; E202H xxx (“x” = 0~9, a ~ z, A ~ Z 
 
Is compliant with the essential requirements and other  relevant provisions of the following EC directives, 
and that all the necessary steps have been taken and  are in force to assure that production units of the 
same product will continue comply with the requirements.  
 
EMC Directive 2004/108/EC as attested by conformity with the following 
harmonized standards: 
-. EN55022:2006, AS/NZS CISPR22:2006, Class B 
-. EN55024:1998 + A1:2001 + A2:2003 
-. EN61000-3-2:2006, Class D 
-. EN61000-3-3:1995 + A1:2001+A2: 2005  
 
Low Voltage Directive 2006/95/EC as attest ed by conformity with the following 
harmonized standard:   
-. EN60950-1:2001 + A11:2004 
 
RoHS Directive 2002/95/EC on  the Restriction of the Use of certain Hazardous 
Substances in Electrical and Electronic Equipment 
 
Year to begin affixing CE marking 2009. 
 
 
 
 
_______________________________ 
                                 Feb. 9, 2009         - 
Easy Lai /Manager                                                         Date 
Regulation, Acer Inc.
 
 
www.emachines.com
European Union
or Blank) 
 
						

							
Safety, Regulatory, and Legal Notices
20