Epson 3 Lcd Manual

2.
Carefully opentheairfilter cover.
 3.
Pull theairfilter outofthe projector.
 Note:
Airfilters contain ABSresin andpolyurethane foam.Dispose ofused airfilters according to
 local
regulations.
 91   

4.
Place thenew airfilter inthe projector asshown andpush gently untilitclicks intoplace.
 5.
Close theairfilter cover.
 Parent
topic:AirFilter andVent Maintenance
 Projector
LampMaintenance
 The
projector keepstrackofthe number ofhours thelamp isused anddisplays thisinformation inthe
 projectors
menusystem.
 Replace
thelamp assoon aspossible whenthefollowing occurs:
 •
The projected imagegetsdarker orstarts todeteriorate
 •
Amessage appearswhenyouturn onthe projector tellingyoutoreplace thelamp
 •
The...

Projector
Information Display-Info Menu
 Replacing
theLamp
 Before
youreplace thelamp, letthe projector cooldown foratleast onehour sothe lamp willnot behot.
 Warning:
Letthelamp fullycool before replacing itto avoid injury.
 You
canreplace thelamp while theprojector ismounted tothe ceiling, ifnecessary.
 1.
Turn offthe projector andunplug thepower cord.
 2.
Allow theprojector lamptocool down foratleast onehour.
 3.
Use thescrewdriver includedwiththereplacement lamptoloosen thescrew securing thelamp...

4.
Slide thelamp cover outand liftitoff.
 5.
Loosen thescrews securing thelamp tothe projector. Thescrews donot come allthe way out.
 94   

6.
Liftupthe lamp handle andgently pullthelamp outofthe projector.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 95   

7.
Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright
 way.
Press thehandle downuntilitlocks intoplace.
 Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 96  

8.
Push inthe lamp firmly andtighten thescrews tosecure it.
 9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 97   

Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage
 information.

1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theReset menuandpress Enter....

Related
tasks
 Replacing
theLamp
 Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands,...

3.
Insert thebatteries withthe+and –ends facing asshown.
 4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlOperation
 100