Epson 4880 C Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 511.4.4.6  Interface SelectSelecting this mode allows selection of the automatic interface selection, USB, 
1394, or optional interface.†
Level structure of I/F switching„
Stylus Pro 4400/4800
„
Stylus Pro 4450/4880/4880C
1.4.4.7  Code Page SwitchingSelecting this mode allows the code page switch between PC437 and PC850.†
Level structure of Code Page switching
[∧ / ∨]
[< / >]
[

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 521.4.4.8  Roll Paper MarginSetting this panel allows switching roll paper margin, all sides 3mm / all sides 
15mm / top and bottom 15mm, right and left 3mm / top and bottom 25mm, right 
and left 3mm. This setting is only valid for roll paper. Its not valid for cut sheet. 
This setting changes only margin, and doesnt change image size.†
Level structure for roll paper margin setting
†
If margin=3mm is set
Printing...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 53 NOTE 1:The top margin is also set with Set the paper top margin (SN 
command). Actual top margin is decided as following;
•Panel setup value (top margin) > Paper top margin 
(Panel setup value is used as the top margin)
•Panel setup value (top margin) < Paper top margin 
(Paper top margin is used as the top margin)
2:Under special condition (Right/left no margin print), right / left 
margin can be set to 0.
3:When...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 541.4.4.10  Skew Error DetectionWhen this setting is set to “OFF”, a paper skew error is not occurred and 
printing operation is continued. Even if this setting is set to “ON”, cut paper 
skew is not detected after printing.
Even if the printing image is outside the paper because of the paper not 
straight by the setting, the printer doesnt inform the error, so users have to set 
up at their own responsibility.
Skew...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 551.4.4.12  Cutter Position AdjustmentCutter position can be adjusted by this mode. Cutter position adjustment 
pattern is printed, and users entering the cutter position number to adjust the 
cutter position.
NOTE:This adjustment is effective for top/bottom no margin print.
This mode only operates when paper type is roll paper and setting is roll paper 
cut ON. Other than this, the printer displays UNABLE TO PRINT...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 561.4.4.14  Cut Sheet Size ErrorWhen this setting is OFF, it will prevent the occurrence of size error and keeps 
printing. It will not work for roll paper. 
If the print image is bigger than the paper set by this setting, printer prints by 
clipping the data that is out of paper. If this setting is ON, paper size in 
horizontal direction and value read from detect paper width sensor set by paper 
size setting command...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 571.4.4.16  Cleaning Setting for Nozzle CheckNozzle check method is switched to either auto or manual.
When “Cleaning setting at nozzle check“ (=printer setting menu/auto cleaning) 
is set to ON, auto nozzle check pattern printing is performed. When the 
cleaning setting is set to OFF, manual nozzle check pattern printing is 
executed.
The following shows the operations performed by each setting in Cleaning 
setting...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 581.4.4.18  Printer Setup Value InitializationSelecting this mode allows the user to return all printer-setting values to the 
default values. 
Initializing items are following;
Table 1-30. Printer Setup Value Initialization
Setting item
After initialization
Remaining Paper detection Remaining roll 
paper20m
Remaining roll 
paper warning2Çç
Remaining cut 
sheet100PG
Remaining cut 
sheet warning10PG
PG setting...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 591.4.4.19  Nozzle Check Pattern PrintingSelecting this mode allows the user to print the nozzle check pattern, firmware 
version, used paper/ink, and maintenance tank counter.
Nozzle checks method in nozzle check pattern print is switched to either auto 
or manual by cleaning setting ON/OFF at nozzle check.†
When setting is ON: Perform auto nozzle check pattern printing.
†
When setting is OFF: Perform nozzle check...

EPSON Stylus Pro 4400/4450/4800/4880/4880CRevision CProduct Description Operating Panel 601.4.4.20  Status PrintingSelecting this mode allows the user to print the current panel settings content.
Print status sheet with the following specifications.
„
Print paper size: A4
„
Font: Built-in font (Print all in alphanumeric characters)
„
Print sample: Refer to Figure 1-15.  Status Sheet Print Pattern (8-
color Stylus Pro 4800) and Figure 1-17.  Status 
Sheet Print Pattern (4-color Stylus Pro 4400)
†
Output...