Epson 915 W Manual

When  you  enter  the  correct  password,  Password  Protect  is  temporarily
released.Attention•If  an  incorrect  password  is  entered  three  times  in  succession,  the  message
"The  projector's  operation  will  be  locked."  is  displayed  for  approximately  five
minutes,  and  then  the  projector  switches  to  standby  mode.  If  this  happens,
disconnect  the  power  plug  from  the  electrical  outlet  and  then  reinsert  it  and
turn  the  projector's  power  back  on....

d
Select  Yes when  the  confirmation  message  is  displayed.
The  control  panel  buttons  are  locked  according  to  the  setting  you
chose.a
You  can  release  the  control  panel  lock  by  one  of  the  following
two  methods.
•Select  Off from  Control  Panel  Lock.
s Settings - Control  Panel  Lock p.80
•Press  and  hold  down  the  [Enter]  button  on  the  control  panel
for  about  seven  seconds,  a  message  is  displayed  and  the  lock
is  released.
Anti-Theft  Lock
The  projector  is...

About  EasyMP  Monitor
EasyMP  Monitor  lets  you  carry  out  operations  such  as  checking  the  status
of  multiple  Epson  projectors  that  are  connected  to  a  network  at  a  computer
monitor,  and  controlling  the  projectors  from  the  computer.
You  can  download  EasyMP  Monitor  from  the  following  Web  site.
http://www.epson.com
The  following  provides  brief  descriptions  of  the  monitoring  and  control
functions  that  can  be  carried  out  using  EasyMP  Monitor.
•Registering...

Items  in  the  Configuration  menu  that  cannot  be  set  by  a  Web  browser
•Settings  menu  -  Keystone  -  Quick  Corner
•Settings  Menu  -  Pointer  Shape
•Settings  Menu  -  Pattern
•Settings  Menu  -  User  Button
•Extended  Menu  -  User's  Logo
•Extended  Menu  -  Language
•Extended  Menu  -  Operation  -  High  Altitude  Mode
•Extended  Menu  -  Operation  -  Lens  Cover  Timer
•Reset  Menu  -  Reset  All  and  Reset  Lamp  Hours
The  settings  for  items  on  each  menu  are  the  same...

Name Function
A
[t] buttonTurns the projector power on or off.
s "From Installation to Projection" p.30
B
[Computer] buttonEach time the button is pressed, input changes between
images from the Computer1 port and the Computer2
port.
C
[Video] buttonEach time the button is pressed, the image cycles through
Video, S-Video, and HDMI ports.
D
[Freeze] buttonImages are paused or unpaused.
s "Freezing the Image (Freeze)" p.51
E
[A/V Mute] buttonTurns the video and audio on or off.
s "Hiding...

Using  the  Mail  Notification  Function  to  Report  
Problems
When  you  set  Mail  Notification,  notification  messages  are  sent  to  the  preset
email  addresses  when  a  problem  or  warning  occurs  with  a  projector.  This
will  enable  the  operator  to  be  notified  of  problems  with  projectors  even  at
locations  away  from  the  projectors.s
 Network - Mail - Mail  Notification p.89a
•Up  to  a  maximum  of  three  notification  destinations  (addresses)  can
be  registered,  and...

a
•SNMP  should  be  managed  by  a  network  administrator  or  someone
who  is  familiar  with  the  network.
•To  use  the  SNMP  function  to  monitor  the  projector,  you  need  to
install  the  SNMP  manager  program  on  your  computer.
•The  managing  function  using  SNMP  cannot  be  used  via  wireless
LAN  in  Quick  connection  mode.
•Up  to  two  destination  IP  addresses  can  be  saved.
ESC/VP21  Commands
You  can  control  the  projector  from  an external  device  using  ESC/VP21....

•Projector  input  port  name:  RS-232C
  (PC serial cable) Signal Name Function
GND Signal wire ground
TD Transmit data
RD Receive data
Communications  protocol
•Default  baud  rate  setting:  9600  bps
•Data  length:  8  bit
•Parity:  None
•Stop-bit:  1  bit
•Flow  control:  None
About  PJLink
PJLink  Class1  was  established  by  the  JBMIA  (Japan  Business  Machine  and
Information  System  Industries  Association)  as  a  standard  protocol  for
controlling  network-compatible  projector's  as...

•Manufacturer  name  displayed  for  "Manufacture  name  information  query"
EPSON
•Model  name  displayed  for  "Product  name  information  query"
EB-925/C2080XN/PowerLite 1835
EB-915W/C2070WN/PowerLite 915W
EB-910W/C2050WN/PowerLite 910W
EB-905/C2060XN/PowerLite 905
EB-900/C2040XN/PowerLite 900
EB-96W/C2030WN/PowerLite 96W
EB-95/C2020XN/PowerLite 95
About  Crestron  RoomView
®
Crestron  RoomView
® is  an  integrated  control  system  provided  by
Crestron
®.  It  can  be  used  to...

a
Start  a  Web  browser  on  the  computer.
b
Enter  the  IP  address  of  the  projector  in  the  address  field  of  the
Web  browser,  and  press  the  Enter  key  on  the  keyboard.
The  operation  window  is  displayed.
Using  the  operation  window
A
You can perform the following operations when you click the buttons.
Button Function
PowerTurns the projector power on or off.
Vol-/Vol+Adjusts the volume.
Button Function
A/V MuteTurns the video and audio on or off.
s "Hiding the Image and Sound...