Epson Aculaser M 2000 Service Manual

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      Product Specifications 21
Confidential1.1.4  Controller SpecificationsBASIC SPECIFICATIONS
EXTERNAL INTERFACES
Figure 1-7.  External Interfaces
CPU 32bit RISC CPU
Enhanced Technology NPGI, PGI, CRIT, RIT
RAM Standard (on-board) 256 MB
Maximum 768 MB
Expansion Type DDR333 CL=2.5
(128 MB, 256 MB, 512 MB)
Numbers of slot 1 slot
ROM Type 32-bit width (3.3V)
Program 32 MB (DIMM)
Font Included in the program
Expansion ROM ROM for Adobe PS3 as a standard...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 22
Confidential1.2  List of Printer MessagesThe following table shows the printer’s LEDs indications in each printer status. 
 
The meanings of the symbols used in the table are as follows.
„O: Lights
„---: Lights or flashes depending on the condition
„X: Off
„
Δ1:  Flashes on and off at intervals of 0.3 seconds
„Δ2:  Flashes on and off at intervals of 0.6 seconds
Table 1-6.  List of Printer Messages
Class
Printer Status...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 23
ConfidentialWarningReserve Job Canceled
X
CompactFlash Full
X
Form Data Canceled
X
PS3 CompactFlash Full
X
Cant Print
X
Collate DisabledX
Check Paper SizeX
Image OptimumX
Check Paper TypeX
Need MemoryX
Not Supported USB Device XXX
*2
X
Format Error ROM AX
Correct time using Time SettingX
Replace Photocon uuuu
*3
X
uuuu
*3 Toner LowX
Photocon uuuu
*3 Needed SoonX
Waste Toner Box Near FullX
Replace Fuser
Δ2
Replace...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 24
Confidential
Note : Messages in the table are sorted in the order descending priorities. The message shown 
at top of the table has the highest priority.
*1 : nnn = Number of written blocks, mmm = total number of blocks
*2 : XXX is replaced with “Hub” when a USB memory with a hub is installed. Otherwise, 
it is displayed as a blank.
*3 : See 
“3.3.3 Controller Related Error” (p.129)
 for details.
*4 : “WWWWW” indicates...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 25
Confidential1.2.1  Error Message and Troubleshooting
l
Table 1-7.  Error Message and Troubleshooting
Message
Explanation
Remedy
Format Required 
No=LeftSW 
Yes=OK SWA CompactFlash which does not 
have two partitions has been 
installed.
†
Press the OK button to 
format the CompactFlash.
†
Turn off the printer without 
any operation and remove 
the CompactFlash. An unformatted CompactFlash 
has been installed.
The printer...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 26
ConfidentialReplace Photocon uuuu
†
Printing has stopped because 
the photoconductor unit of 
the specified color has 
reached its lifetime. 
†
Cannot be cleared by the 
Start/Stop switch.
†
Error LED flashing„
Replace with a new 
photoconductor unit of 
the specified color. 
„
Press the Start/Stop 
switch to clear the error 
and continue printing.
†
Error LED On
Replace with a new 
photoconductor unit of the 
specified...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 27
Confidential
Figure 1-8.  cover
Invalid CompactFlash 
ErrorThe installed CompactFlash 
cannot be used on this printer or 
it is a CompactFlash of less than 
4 GB, or No is selected when 
Format Required occurred. 
This error also occurs under the 
following conditions for a 
CompactFlash with the 
password lock function. 
†
Password lock has failed. 
†
Could not unlock the 
password lock.
†
Turn off the printer, remove...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 28
Confidential1.2.2  Warning Message and Troubleshooting
Table 1-8.  Warning Message and Troubleshooting
Message
Explanation
Remedy
Reserve Job CanceledAn attempt has been made to 
register a new Re-Print Job, Verify 
Job, Stored Job or Confidential Job 
though the number of registrations 
has reached the maximum.Delete or print the registered 
Re-Print Jobs, Verify Jobs, 
Stored Jobs or Confidential 
Jobs.
When the user...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 29
ConfidentialCorrect time using 
Time SettingThe printer has not been turned on 
for 10 days or longer and the 
capacitor has been
discharged.Set the date and time again 
from Time Setting. This 
warning recurs until they are 
set again.
Replace Photocon uuuuThe photoconductor unit for the 
specified color has reached its 
lifetime when it has been 
continuously used after the 
Replace Photocon uuuu error. 
The print...

EPSON AcuLaser C9200NRevision D
PRODUCT DESCRIPTION      List of Printer Messages 30
ConfidentialReplace Feed Roller 
xxxMessage warning that the paper 
feed roller has reached the end of 
its lifetime when it has been 
continuously used after the 
Replace Feed Roller xxx error. 
The print quality is not guaranteed 
while this message is being 
displayed.This message is cancelled by 
one of the following.
†
Executing Clear All 
Warnings in the Reset 
Menu.
†
Executing Reset in the 
Reset Menu.
†...