Epson Brightlink 450wi Quick Guide

BrightLink  450WiQuick Guide
Installing the SoftwareUsing the ProjectorSolving Problems
Notices and Warranty
TM
Guide rapide
Installation du logiciel
Utilisation du projecteur Résolution des problèmes Avis et garantie
Keep this book with the pens and remote control at all times.
Conservez ce guide avec les crayons et la télécommande en tout temps. 

2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
Installing the Pen Batteries  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7
Installing the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . ....

3
Introduction
After your projector has been mounted on the wall, read this booklet to:
■Install the software on your computer 
■Connect the cables to your computer
■Use the remote control
■Turn on the projector and adjust the image
■Calibrate and use the pens
■Use Easy Interactive Tools
■Solve basic problems
This booklet explains how to use the projector with a laptop or other computer. 
You can also connect the projector to video players, document cameras, or other 
equipment. For additional...

4Getting Started
Getting Started
Before you can use your interactive projector, you need to install the software and 
connect the cables to your computer. Then you can turn on the projector and 
calibrate.
Installing the Software
This section explains how to install the software for the interactive pens and your 
on-screen manuals. If you need to install the software for network projection and 
monitoring, see your on-screen EasyMP guides for instructions.
Periodically, it’s a good idea to check Epson’s...

Installing the Software5 4. When you see one of the following screens, select 
Register to Startup 
(Windows) or Start up (Macintosh) and Launch Easy Interactive Driver.
5. Click 
Finish (Windows) or Continue (Macintosh).
6. Follow the on-screen instructions to finish installing the software and start 
Easy Interactive Driver. 
Installing Easy Interactive Tools and Manuals
1. Insert the BrightLink 450Wi CD in your computer.
Windows: If you see the AutoPlay window, click 
Run Setup.exe. If you see a 
User...

6Getting Started
3. When you see the following screen, click Install and follow the on-screen 
instructions.
4. Follow the on-screen instructions to finish installing the software and 
manuals, and register your projector. 
5. After you have finished the installation, double-click the 
Download Easy 
Interactive Tools
 link on your desktop. 
6. Follow the instructions on the screen to download and install the Easy 
Interactive Tools.
Note: 
You can also visit the following website to download Easy...

Installing the Pen Batteries7
Installing the Pen Batteries
Make sure the pen batteries are installed. To check the batteries, press the button. 
If the indicator light is green, the batteries have enough power.
It’s a good idea to attach a commercially-available cord or lanyard to the pens.
If you need to install or replace the batteries, use two alkaline AAA batteries. If you 
have a battery charger, you can also use rechargeable AAA batteries. 
1. Press in the tab on the battery cover as you lift the...

8Getting Started
Installing the Remote Control Batteries
Make sure the remote control batteries are installed. If you need to install or 
replace them, use 2 AA alkaline batteries.
1. Press in on the catch on the battery cover as you lift the cover off.
2. Install two batteries, inserting the 
+and– ends as shown.
3. Replace the battery cover and press it down until it clicks into place. 

Connecting the Cables9
Connecting the Cables
You can connect the projector to any computer that has a standard monitor out 
port using the VGA computer cable that came with the projector. 
In addition, you must connect the USB cable before you can use the interactive 
pens. If the cable is not long enough to reach your computer, you may need to use 
a USB booster cable (not included).
You can also project through the USB port (USB display) or through a network. 
However, the VGA monitor out port on your...

10Getting Started
Connecting the USB Cable for the Interactive Pens 
In order to use the interactive pens, you must connect the USB cable to the 
projector and your computer.
1. Locate the USB cable connected to the projector.
2. Connect the flat end of the cable to any available  USB port on your 
notebook or desktop computer.