Epson EasyMP Monitor User Manual

Registering and deleting projectors for monitoring
11
Registering projectors using automatic search 
(Searching for and registering projectors that are 
located in the same segment)Procedures for automatic search
ProcedureA
Right-click in Grouping view and select "New" - "Projector 
(automatic search)".
The following Create new projector (automatic registration) win-
dow will be displayed.
If Detail list view is displayed, select New - Projector (automatic 
search) from the Edit menu.
B...

Registering and deleting projectors for monitoring
12
Procedures for registration
ProcedureA
Select the projector to be registered from the displayed list, 
and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display nameEnter the name of the projector(s) to be 
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A 
space cannot be used as the first character.
Display iconSelect...

Registering and deleting projectors for monitoring
13
B
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
q
Projectors that have been registered using automatic search are searched 
for again by projector name each time EasyMP Monitor is started.
C
To end the registration operation, click   in the top-right 
corner of the window or click "Cancel".
The...

Registering and deleting projectors for monitoring
14
C
Click "Search".
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed. 

Registering and deleting projectors for monitoring
15
Procedures for registration
ProcedureA
Select the projector(s) to be registered from the displayed 
list, and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display nameEnter the name of the projector(s) to be 
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A 
space cannot be used as the first character.
Display...

Registering and deleting projectors for monitoring
16
B
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
C
To end the registration operation, click   in the top-right 
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
Refer to s"Monitoring window...

Registering and deleting projectors for monitoring
17
q
You can also carry out this operation by selecting New - Projector (manual 
registration) from the Edit menu.
B
Enter the IP address of the projector to be registered in the 
"IP address" box and then click "Search". When the message 
is displayed, click "OK".
If you are using a serial W TCP/IP conversion adapter and cable to 
connect the projector, select Use Serial W TCP/IP conversion 
adaptor., enter the port number in...

Registering and deleting projectors for monitoring
18
A Parent group can be set for other parent groups, so that a hierarchical 
group arrangement can be created.
First, create the registration groups, and then register projectors into the 
groups that have been created.
ProcedureA
Right-click in Grouping view and select "New" - "Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
If Detail list view is displayed, select New -...

Registering and deleting projectors for monitoring
19
If the projector name or IP address changes after 
registrationFor projectors that have been registered manually
ProcedureA
Right-click on a projector icon in Grouping view or Detail list 
view and select "Monitoring disabled". Then right-click the 
projector icon again and select "Edit".
q
You can also carry out these operations by using the Edit menu.
B
If only the projector name has been changed, click "Search" 
in the Edit...

Monitoring window layout
20
Monitoring window layoutTypes of monitoring windows and switching methodTypes of monitoring windows
There are two types of monitoring windows. Select a desired window.
•Grouping view
This view lets you check the status of group registrations in a 
hierarchical diagram.•Detail list view
This view lets you display the status of each projector as a list so that the 
projectors can be checked in detail. You can also display specific items 
as a list, and sort display items using a...