Epson Home Projector TW5350 Users Guide

Preparing
20
When using a commercially available HDMI cable
Connecting Smartphones or Tablets
You can connect MHL compatible smartphones or tablets.
Use a commercially available MHL cable to connect the micro USB port of smartphones and tablets to the
HDMI1/MHL port on the projector.
The connected smartphone or tablet begins charging when images are projected.
Attention
•Be sure to use an MHL compatible cable for making connections. If a cable that does not meet the MHL
standards is connected, the...

Preparing
21
Attention
•If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB
devices should be connected to the projector directly.
•Connect a digital camera using a USB cable specified for use with the device.
•Use a USB cable less than 3 m in length. If the cable exceeds 3 m, slideshows may not function correctly.
Connecting External Speakers
To output audio from external speakers, connect the speakers to the projector's Audio Out port with a...

Preparing
22
b
Use the  buttons to select On, and then press the  button to confirm the
selection.
c
Turn on "pairing mode" on the Bluetooth device you want to connect to.
See the documentation supplied with the Bluetooth device for more information.
d
Select Search Bluetooth Device.
A list of available devices is displayed.
e
Use the  buttons to select the Bluetooth device you want to connect to, and
then press the 
 button to connect.
The next time you turn on the projector, it automatically...

Preparing
23
Warning
•Electromagnetic interference may cause medical equipment to malfunction. Before using the device, make
sure there is no medical equipment in the vicinity.
•Electromagnetic interference may cause automatically controlled equipment to malfunction which could
cause an accident. Do not use the device near automatically controlled equipment such as automatic doors
or fire alarms.
c
•Connect a Bluetooth device that supports copyright protection (SCMS-T).
•You may not be able to connect...

Preparing
24
Preparing the Remote Control
Installing the Remote Control Batteries
Attention
•Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the
correct way.
•You cannot use other batteries except for the AA size manganese or alkaline.
a
Remove the battery cover.
While pushing the battery compartment
cover catch, lift the cover up.
b
Replace the old batteries with new
batteries.
Check the polarity of the batteries (+) and
(-) before installing....

Preparing
25
Remote Control Operating Range
Operating range (left to right)Operating range (top to bottom) 

Basic Operations
26
Projecting Images
Turning On the Projector
a
Connect the equipment to the
projector.
b
Connect using the power cord
supplied.
The projector's power indicator turns blue.
This indicates that the projector is receiving
power, but is not yet turned on (it is in
standby mode).
c
Open the lens cover.
d
Turn on the connected equipment.
e
Press the  button on the remote
control or the control panel.
Remote control Control panel
The operation indicator flashes blue as the
projector warms...

Basic Operations
27
Remote control Control panel
Press the button for the target port.
Press the  button and select the target port.
Press the 
 button to confirm the selection.
Using the Home Screen
The Home screen feature allows you to easily select an image source and access useful functions.
Press the 
 button on the remote control or the control panel to display the Home screen.
Under the following conditions, the Home screen is displayed automatically when the projector is turned on.
•Home Screen...

Basic Operations
28
Turning Off
a
Turn off the connected equipment.
b
Press the  button on the remote
control or the control panel.
Remote control Control panel
A confirmation message is displayed.
c
Press the  button again.
The operation indicator flashes and the
projector begins to cool down.
d
Wait until cool-down is complete.
When cool-down is complete, the
operation indicator stops flashing.
e
Disconnect the power cord.
c
If the power cord is connected,
some electricity is consumed even
if no...

Basic Operations
29
Adjusting the Projected Image
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the 
 button on the remote control to display the test pattern.
Press the  button again to end the test pattern display.
Adjusting the Focus
Turn the focus ring to adjust the focus.
Adjusting the Projection Size
Turn the zoom ring to adjust the size of the...