Epson Monitor V4.30 User Manual

Registering and deleting projectors for monitoring
11
Registering projectors using automatic search 
(Searching for and registering projectors that are 
located in the same segment)Procedures for automatic search
ProcedureA
Right-click in Grouping view and select "New" - "Projector 
(automatic search)".
The Create new projector (automatic registration) window will be 
displayed.
If Detail list view is displayed, select "New" - "Projector (automatic 
search)" from the Edit...

Registering and deleting projectors for monitoring
12
Procedures for registration
ProcedureA
Select the projector(s) to be registered from the displayed 
list, and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display nameEnter the name of the projector(s) to be displayed in 
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A space 
cannot be used as the first character.
Display...

Registering and deleting projectors for monitoring
13
B
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
Projectors that have been registered using automatic search are 
searched for again by projector name each time EMP Monitor is 
started.
C
To end the registration operation, click   in the top-right 
corner of the window or click "Cancel".
The...

Registering and deleting projectors for monitoring
14
C
Click "Search".
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed. 

Registering and deleting projectors for monitoring
15
Procedures for registration
ProcedureA
Select the projector(s) to be registerd from the displayed list, 
and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display nameEnter the name of the projector(s) to be 
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A 
space cannot be used as the first character.
Display...

Registering and deleting projectors for monitoring
16
B
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
C
To end the registration operation, click  in the top-right 
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
Refer to s"Monitoring window...

Registering and deleting projectors for monitoring
17
Registration by specifying an IP address (Manual 
registration)
ProcedureA
Right-click in Grouping view and select "New" - "Projector 
(manual registration)".
The following window will be displayed.
If Detail list view is displayed, select "New" - "Projector (manual 
registration)" from the Edit menu.You can also carry out this operation by selecting New - Projector 
(manual registration) from the Edit menu.
B
Enter the...

Registering and deleting projectors for monitoring
18
D
After entering the details, click "Register" to start the 
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in 
Grouping view or Detail list view.
Registering several projectors to a monitoring group 
all at once
Projectors that have been registered can then be registered together into 
different groups so that they can be monitored and controlled together....

Registering and deleting projectors for monitoring
19
ProcedureA
Right-click in Grouping view and select "New" - "Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
If Detail list view is displayed, select New - Group from the Edit 
menu.
You can also carry out this operation by selecting New - Group from the Edit menu.
B
When the setup is complete, click "Register" to start the 
registration. When the message is...

Registering and deleting projectors for monitoring
20
If the projector name or IP address changes after 
registrationFor projectors that have been registered manually
ProcedureA
Right-click on a projector icon in Grouping view or Detail list 
view and select "Monitoring disabled". Then right-click the 
projector icon again and select "Edit".
You can also carry out these operations by using the Edit menu.
B
If only the projector name has been changed, click "Search" 
in the Edit...