Epson Powerlite Home Cinema 2000 Users Guide

3.
Connect theother endtoaPC port onthe projector.
 4.
Tighten thescrews onthe VGA connector.
 Parent
topic:Connecting toComputer Sources
 Related
tasks
 Connecting
toaComputer forSound
 Connecting
toaComputer forHDMI Video andAudio
 If
your computer hasanHDMI port,youcanconnect itto the projector usinganoptional HDMIcable.
 Note:
Toconnect aMac thatincludes onlyaMini DisplayPort, Thunderboltport,orMini-DVI portfor
 video
output, youneed toobtain anadapter thatallows youtoconnect tothe projectors...

Parent
topic:Connecting toComputer Sources
 Related
tasks
 Connecting
toExternal Speakers
 Connecting
toaComputer forSound
 If
your computer presentation includessoundandyoudidnot connect itusing theprojectors HDMIport,
 you
canstillplay sound through theprojectors speakersystem.Connect anoptional stereomini-jack
 adapter
cable(withone3.5mm mini-plug andtwoRCA plugs).
 1.
Connect theaudio cabletoyour laptops headphone oraudio-out jack,oryour desktops speakeror
 audio-out
port.
 2.
Connect theother...

4.
Connect thestereo mini-jack endofthe cable toyour projectors AudioOutport.
 Parent
topic:Projector Connections
 Connecting
toExternal USBDevices
 Follow
theinstructions inthese sections toconnect external USBdevices tothe projector.
 USB
Device Projection
 Connecting
aUSB Device orCamera tothe Projector
 Selecting
theConnected USBSource
 Disconnecting
aUSB Device orCamera FromtheProjector
 Parent
topic:Projector Connections
 USB
Device Projection
 You
canproject images andother content...

•
Formatted inFAT orFAT32
 •
Self-powered bytheir ownACpower supplies (bus-powered harddrives arenotrecommended)
 •
Avoid usingharddrives withmultiple partitions
 You
canproject slideshows fromimage filesonaconnected USBdevice ormemory cardreader.
 Parent
topic:Connecting toExternal USBDevices
 Related
topics
 Projecting
aSlide Show
 Connecting
aUSB Device orCamera tothe Projector
 You
canconnect yourUSB device orcamera tothe projectors USBType Aport anduseitto project
 images
andother content.
 1....

2.
Press theSlideshow buttononthe remote control.
 3.
Press thebutton againtocycle through otherUSBsources, ifavailable.
 Parent
topic:Connecting toExternal USBDevices
 Disconnecting
aUSB Device orCamera FromtheProjector
 When
youfinish presenting withaconnected USBdevice orcamera, youmust prepare todisconnect the
 device
fromtheprojector.
 1.
Ifthe device hasapower button, turnoffand unplug thedevice.
 2.
Disconnect theUSB device orcamera fromtheprojector.
 Parent
topic:Connecting toExternal...

2.
Insert thebatteries withthe+and –ends facing asshown.
 3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Related
references
 Remote
ControlSpecifications
 36   

Opening
theLens Cover
 1.
Toopen theprojectors lenscover, slidetheA/V Mute slidelever untilitclicks intotheopen position.
 2.
Tocover thelens ortemporarily turnoffthe projected pictureandsound, slidetheA/V Mute slide
 cover
closed.
 Note:
Thelamp remains oninECO mode whilethelens cover isclosed.
 Parent
topic:Setting Upthe Projector
 37  

Wireless
NetworkProjection
 You
cansend images toyour projector throughawireless network. Todothis, youmust install the
 Epson
802.11b/g/n wirelessLANmodule, andthen setupyour projector andcomputer forwireless
 projection.

Note:
Thewireless LANmodule isnot included withyour projector.
 You
canconnect theprojector toyour wireless networkbyconfiguring theconnection manuallyusingthe
 projectors
Networkmenus.
 After
installing themodule andsetting upthe projector, installthenetwork software....

The
light onthe wireless LANmodule turnsonwhen themodule isinstalled andoperating. Thelight
 flashes
whenthemodule iscommunicating overthenetwork.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsManually
 Before
youcanproject fromyourwireless network, youmust select thenetwork settingsforthe projector
 using
itsmenu system.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 39  

3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 6.
Select theProjector Namesetting andenter aname upto16 alphanumeric characterslongto
 identify
theprojector overthenetwork.
 Note:
Usethedisplayed keyboardtoenter thename. Pressthearrow buttons onthe remote control
 to
highlight characters andpress Enter toselect them.
 40