Epson Projector Emp 735 User Manual

							30
EasyMP Operation Guide
Playing Graphics Files
There are two ways to view images saved on a memory card by using the 
CardPlayer function.
View image files
This is a function for playing and projecting the contents of a graphics file. 
Ordered play of graphics files within a folder (Slideshow)
This is a function for projecting the file contents within a folder, in order, one file 
at a time. 
Playing Graphics
1Start the CardPlayer.  p.20 
This displays the content of the inserted memory card.
2Press the [ ], [ ], [ ], and [ ] buttons on the remote control to position 
the cursor on the file to play. 
3Press the following buttons on the remote control depending on the 
operation mode in use. 
Guide mode : Press the [Enter] button to display the Easy Menu. Select 
View Image in the menu, and press the [Enter] button.
Quick mode : Press the [Enter] button. 
Graphics file 
						

							31
Playing Graphics Files
EasyMP Operation Guide
4Play the graphics files. Pressing the [Enter] or [ESC] buttons on the 
remote control returns the display to the file list screen. 
Playing all Graphics within a Folder in Order (Slideshow)
You can project the graphics files in a folder one at a time, in order. This function is 
called Slideshow. Execute the slideshow by the following procedure.
Tip :
You can set display conditions such as continuous play, and transition effects.  p.33 
1Start the CardPlayer.  p.20 
This displays the content of the inserted memory card.
2Press the [ ], [ ], [ ], and [ ] buttons, to position the cursor on the 
folder of the slideshow to perform. 
						

							32
Playing Graphics Files
EasyMP Operation Guide
3Press the following buttons on the remote control depending on the 
operation mode in use. 
Guide mode : Press the [Enter] button to display the Easy Menu. Select 
Play Slideshow in the menu, and press the [Enter] button.
Quick mode : Press the [ESC] button to display the Easy Menu. Select 
Play Slideshow in the menu, and press the [Enter] button.
4This runs the slideshow, each of the graphics files in the folder is played, 
in order. 
After play has continued to the end, control automatically returns to the file list 
screen. The slideshow will repeat from the beginning once play has completed 
when Continuous Play is ON. p.33 
Just as with a scenario, it is possible to proceed to the next screen, return to the 
previous screen, or stop playback during projection of a slideshow.   
Operation During a Presentation p.27  
						

							33
EasyMP Operation Guide
Setting Display Conditions and Operation Mode
You can set the display conditions and operation mode for slideshow play. The 
content for display conditions that can be set is: Continuous Play, Screen switching 
time, Display order, Effect, and Mode switching. 
1Press the [ ], [ ], [ ], and [ ] buttons on the remote control to position 
the cursor on the folder where display conditions are to be set. 
2Press the following buttons on the remote control depending on the 
operation mode in use. 
Guide mode : Press the [Enter] button to display the Easy Menu. Select 
Options on the menu, and press the [Enter] button.
Quick mode : Press the [ESC] button to display the Easy Menu. Select 
Options on the menu, and press the [Enter] button. 
3Set each of the items.
Enable settings by positioning the cursor on the desired item and pressing the 
[Enter] button on the remote control. 
Details for of the items are given below.  
						

							34
Setting Display Conditions and Operation Mode
EasyMP Operation Guide
4Position the cursor on the OK button by pressing the [ ] button on the 
remote control, then press the [Enter] button.
The settings are applied.
If you do not wish to apply the settings, position the cursor on the Cancel 
button and press the [Enter] button.Continuous 
PlayIndicates whether to perform the slideshow repetitively.
Screen 
switching timeAfter the time designated here has elapsed, the next file is 
displayed. If No is selected, the slideshow will proceed 
to the next file when either the [Enter] or [Page Down] 
key is pressed on the remote control.
Display orderSets the order of the files to be displayed. 
EffectThis sets the effects to apply when displaying file 
content. 
Mode 
SwitchingSwitches the operation mode in CardPlayer. 
The initial setting is Guide mode. 
See Easy Menu Operation (Guide Mode) ( p.22 ) for 
Guide mode operations. See Quick Mode Operation 
( p.24 ) for Quick mode operations.  
						

							Advanced 
Operations
Here, we will describe how to manage the setting of a projector 
connected to a computer on a network.
Setting, Monitoring and Controlling 
  from a Computer.............................................................  36
Changing Settings Using a Web Browser .............................  36
Displaying the Setup Page .................................................................  37
Projector Setup ..................................................................................  38
Projector Control ...............................................................................  40
Monitoring and Control Using EMP Monitor .........................  41
Management Using SNMP ......................................................  48 
						

							36
EasyMP Operation Guide
Setting, Monitoring and Controlling from a Computer
When a computer and the projector are connected by a wireless LAN or by a wired 
LAN, the following projector setting changes and administration are possible from 
the computer via the network. 
Setting network functions and controlling the projector using a Web 
browser.
Monitoring and controlling the projector using the EMP Monitor.(During 
access point mode connection).
Obtaining projector status and network settings, controlling the projector, 
and messaging errors (during access point connection mode only) using 
SNMP
 and the SNMP manager program.
Here we will explain the above three methods.
Changing Settings Using a Web Browser
You can setup and control the projector using the Web browser of a computer that is 
connected to the projector by a wireless LAN. Setup and control operations can be 
performed remotely if this function is used. 
Use Microsoft Internet Explorer 5.0 or later as the Web browser. 
Tip :
Setup and control are possible using a Web browser if Standby Mode is Network ON 
in the Advanced menu of the projectors configuration menu, even if the projector is in 
standby mode (when the Power indicator is lit orange). 
						

							37
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
Display the browser page for setup and control by either of the following 
procedures.
Using the EMP NS Connection Tools
1Connects a computer to the projector in Easy connect mode or Access 
point mode.  See Connecting Using Easy Connect Mode and 
Connecting in Access Point Mode in the EasyMP Setup Guide.
2Click the Projector Operation URL Display icon in the EMP NS 
Connection toolbar.
This starts the Web browser and displays the browser page for setup and 
control.
Entering the IP Address of the Projector
When the projector’s Network advanced settings have been set to Access point 
mode, the projector’s IP address can be input by the following steps, and the 
browser page for setup and control of the projector can be opened.
1Start the Web browser on the computer.
2Enter the IP address of the projector in the address input box of the Web 
browser, and press the [Enter] key on the computer keyboard. 
This displays the browser page for setup and control.
Displaying the Setup Page
Projector 
Setup
Projector 
Control 
						

							38
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
It is possible to apply setup items in the configuration menu of the projector and the 
Network advanced setting screen of the Network Screen. The settings are reflected 
in the configuration menu and the Network advanced settings screen of the 
Network Screen. 
Configuration of Menu Items that can be set by the Web Browser
The items in the configuration menu that can be set are as follows:
The items available on each menu are the same as on the configuration menu of the 
projector. See Using the Configuration Menu Functions in the EMP-735 
Users Guide. 
Projector Setup
Video menu 
(Computer)Position, Tracking, Sync., Brightness, Contrast, 
Sharpness, Color Mode, Input Signal, Auto Setup, 
Reset
Video menu 
(Component video)Position, Brightness, Contrast, Color, Tint, Sharpness, 
Color Mode, Input Signal, Aspect Ratio
, Reset
Video menu (S-Video, 
Video)Position, Brightness, Contrast, Color, Tint, Sharpness, 
Color Mode, Video Signal, Aspect Ratio, Reset
Video menu 
(EasyMP)Brightness, Contrast, Sharpness, Color Mode, Reset
Audio menuVolume, Tone, Reset
Setting menuKeystone, Auto Keystone, No-signal Msg., Prompt, 
Color Mode Prompt, A/V Mute, Sleep Mode, Reset
Advanced menuStartup Screen, Color Adjustment, Rear Proj., 
Ceiling, Standby Mode, Reset
About Menu 
(Computer, component 
video, EasyMP)Lamp, Video Source, Input Signal, Frequency, SYNC 
Polarity, SYNC Mode, Resolution, Refresh Rate
About Menu 
(S-Video, video)Video Signal, Lamp, Video Source 
						

							39
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
Network setup items that can be set by the Web browser
The network setup items that can be set are as follows:
Projector name
Projector keyword
ESSID
Channel
WEP encryption
For mat
Key ID
Encryption key
DHCP
IP address
Subnet mask
Gateway address
SNMP
 trap IP address 1
SNMP trap IP address 2
MAC address
 (display only, cannot be changed)
The content of the various items is the same as that of the Network advanced setting 
screen of Network Screen. See Connecting Using Easy Connect Mode and 
Connecting in Access Point Mode in the EasyMP Setup Guide. 
The WEP encryption setting from the Web browser can be keyed in not only in 
hexadecimal, but also in text. The method for setting the WEP encryption by keying 
in text differs depending on the access point. For this reason, please check with the 
administrator of the network you are joining. Then, please first select Text 1 as 
the input Format before attempting to setup the WEP encryption. Try TEXT2 
and TEXT3 if TEXT1 does not provide proper encoding. 
If 128bit is selected in WEP encryption, you can only select 0 as the Key ID. 
If 40bit is selected, you can select either 0, 1, 2, or 3.