Epson Projector PowerLite 92 User Manual

1
 Power
buttoncontrol
 2
 Selects
Computer portsource
 3
 Selects
Video,S-Video ,and HDMI portsources
 4
 Freeze
buttoncontrol
 5
 A/V
Mute button control
 6
 Page
Upand Page Down button controls
 7
 Searches
forsources
 8
 Selects
thenetwork source
 9
 Selects
theUSB Display orUSB device source
 10
 Volume
buttoncontrols
 11
 Closed
Caption control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Parent
topic:UsingtheProjector onaNetwork
 61  

Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system (PowerLite 93/95/96W/905/915W/935W/1835). CrestronRoomView lets
 you
control andmonitor yourprojector usingaweb browser.
 Note:
Youcannot usetheEpson WebControl featureorthe Message Broadcasting plug-inforEasyMP
 Monitor
whenyouuseCrestron RoomView.
 For
additional information onCrestron RoomView, contactCrestron.
 Setting
UpCrestron RoomView Support...

PowerLite
95/96W/905/915W/935W/1835
 5.
SettheRoomView settingtoOn toallow theprojector tobe detected.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 63 

Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
 using
acompatible webbrowser.
 1.
Start yourwebbrowser onacomputer connected tothe network.
 2.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seethisscreen:
 3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available...

7.
When youfinish selecting settings,clickExittoexit theprogram.
 Parent
topic:Crestron RoomView Support
 65 

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aSlide Show
 Turning
Onthe...

1.
Open theprojectors lenscover.
 2.
Connect thepower cordtothe projectors powerinlet.
 67   

3.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.After about five
 seconds,
thepower lightstops flashing andturns green.
 Warning:...

2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and thepower lightturns orange.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 69  

Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen orflashing orange.
 4.
Close theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 PowerLite
92/93
 70