Epson Projector PowerLite Pro Cinema LS10000 User Manual

							To change settings for an input source, make sure the source is connected and select that source.
Setting OptionsDescription
3D Setup 3D DisplaySelects various 3D options for 3D
image sources
2D-to-3D Conversion
3D Display: enables 3D mode
3D Format
2D-to-3D Conversion: converts
3D Depth
2D images to 3D
Diagonal Screen Size
Note:When using 2D-to-3D
Inverse 3D Glasses
Conversion, set3D Formatto
3D Viewing Notice Autoor2D.
3D Format: selects the 3D
format
3D Depth: sets the depth for the
3D image
Diagonal Screen Size: selects
the actual size of the screen to
maximize the 3D effect
Inverse 3D Glasses: reverses
the images projected for the left
and right eyes (enable only if 3D
images do not display correctly)
3D Viewing Notice: enables the
viewing notice displayed when
using 3D mode
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratiosheight ratio) for the selected input
source
Tracking Varying levels available Adjusts signal to eliminate
vertical stripes in computer
images from the PC input port
101 
						

							Setting
OptionsDescription
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images; for best
results, adjust theTracking
setting before adjusting the Sync
setting to improve the accuracy
of the adjustments.
Position Up, down, left, rightAdjusts the image location on the
screen
Deinterlacing OffSets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto Off: for fast-moving video images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Motion Detection 1to 5 Selects how the image is
converted to a progressive
signal; if you experience
problems with still image quality
or flickering video, select a lower
setting for still images or a higher
setting for fast-moving video
content.)
Frame Interpolation OffSmooths fast moving video by
comparing consecutive frames
Low
and inserting an intermediate
Normal frame between them
High
Super-resolution (PowerLite0to 5 Sharpens blurred images
Pro Cinema LS9600e) resulting from increasing
resolution
102 
						

							Setting
OptionsDescription
Super-resolution/4K (PowerLiteOff Sharpens blurred images
Pro Cinema LS10000) resulting from increasing
1 to 5
resolution
4K-1 to4K-5
Super-resolution (1to 5);
reduces blurring when the image
resolution is increased to
1920 × 1080
4K Enhancement ( 4K-1to4K-5);
projects 4K images
(3840 × 2160), employing super-
resolution processing to create
ultra-high-definition video images
Cannot be set when a 4K or
computer image is selected
Detail Enhancement RangeEnhances details to create clear
outlines;
Strength
Range: higher settings increase
the affected area around the
outline
Strength: higher settings create
a stronger effect
Auto Setup OnAutomatically optimizes
computer image quality
Off
103 
						

							Setting
OptionsDescription
Advanced Noise ReductionNoise Reduction: reduces
flickering in analog images in
Setup Level
three levels
Overscan Setup Level: adjusts the level at
HDMI Video Range which dark areas of the image
are rendered black; leave this
Image Processing
setting at 0% for most video
equipment; check your video
equipment specifications to verify
the correct setting
Overscan: changes the
projected image ratio to make the
edges visible by a selectable
percentage or automatically
HDMI Video Range: sets the
video range to match the setting
of the device connected to the
HDMI input port
Image Processing: adjusts how
images are processed; select
Fastto display images quicker;
select Fineto display images in
higher quality
Note: TheReset setting does not reset the Diagonal Screen Size,3D Viewing Notice,Aspect, and
Image Processing settings.
Parent topic: Adjusting the Menu Settings
Related concepts
Image Aspect Ratio
Related tasks
Changing the Super-resolution Setting
Changing the Super-resolution/4K Enhancement Setting
104 
						

							Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting OptionsDescription
Keystone Varying levels available Adjusts vertical image shape to
rectangular
105 
						

							Setting
OptionsDescription
HDMI Link Device ConnectionsAdjusts the HDMI Link options
that allow the projector remote to
HDMI Link
control HDMI-connected devices
Power On Link that support the CEC standard
Power Off Link Device Connections: lists the
devices connected to theHDMI1
and HDMI2 ports
HDMI Link: enables or disables
the HDMI Link function
Power On Link: controls what
happens when you turn on the
projector or a linked device
• PJ -> Device orBidirectional:
turns on the linked device
when the projector is turned on
• Device -> PJ orBidirectional:
turns on the projector when the
linked device is turned on
Power Off Link: controls
whether linked devices are
turned off when the projector is
turned off
106 
						

							Setting
OptionsDescription
WirelessHD Device ConnectionsDevice Connections: displays a
list of available WirelessHD
(PowerLite Pro Cinema WirelessHD
devices
LS9600e) Reception
WirelessHD: controls whether
WiHD Mode the projector receives
WirelessHD signals
Reception: displays the strength
of the WirelessHD signal
WiHD Mode: adjusts the
WirelessHD signal strength and
range
•Full: uses the maximum video
bandwidth at all times
• Dynamic: provides extended
signal range while adjusting
the video bandwidth in real
time; if your WirelessHD signal
is weak, try changing the
WiHD Mode to Dynamic
Lock Setting Lens LockControls projector button locking
to secure the projector
Child Lock
Lens Lock: locks the focus,
Control Panel Lock
zoom, and lens shift settings
Child Lock: locks the power
button
Control Panel Lock: locks all
buttons except the power button
Projection FrontSelects the way the projector
faces the screen so the image is
Front/Ceiling
oriented correctly
Rear
Rear/Ceiling
107 
						

							Setting
OptionsDescription
User Button 2D-to-3D ConversionAssigns a menu option to the
Userbutton on the remote
(PowerLite Pro Cinema 3D Depth
control for one-touch access
LS10000) Inverse 3D Glasses
Power Consumption
Detail Enhancement
Info
Picture in Picture See the list of available Picture in Adjusts the size and location of
Picture optionsthe sub-screen, swaps sources
and exits Picture in Picture mode
108 
						

							Setting
OptionsDescription
Operation Direct Power OnSelects various operation options
Sleep Mode Direct Power On: lets you turn
on the projector without pressing
Illumination
the power button
Trigger Out Sleep Mode: automatically
High Altitude Mode places the projector in standby
mode after an interval of inactivity
Lens Adjustment Mode
Illumination: turns off the lights
on the projector
Trigger Out: outputs a DC 12V
signal from the 3.5 mm mini-jack
Trigger Out 1andTrigger Out 2
ports whenever the projector is
turned on; the Anamorphic
Wide option outputs voltage to
both Trigger Out ports when
Aspect is set to Anamorphic
Wide orHoriz. Squeeze
High Altitude Mode: regulates
the projector’s operating
temperature at altitudes above
4921 feet (1500 m)
Lens Adjustment Mode: adjusts
the amount of lens movement for
the focus, zoom, and lens shift
adjustments when pressing the
arrow buttons; lower numbers
reduce the amount of movement,
and higher numbers increase the
amount of movement per button
press
109 
						

							Setting
OptionsDescription
Display Menu PositionSelects various display options
Menu Color Menu Position: adjusts the
location where the menu is
Messages
displayed
Display Background Menu Color: selects the color of
Startup Screen the menu
Standby Confirmation Messages: controls whether
messages are displayed on the
screen
Display Background: selects
the screen color or logo to
display when no signal is
received
Startup Screen: controls
whether a special screen
appears when the projector starts
up
Standby Confirmation: displays
a confirmation message after
pressing theStandbybutton on
the remote control
Input Signal Video SignalSelects the input signals for
certain ports
Component
Video Signal: specifies the
signal type from input sources
connected to theVideoport or
select Autoto detect the signal
automatically
Component: specifies the signal
type from input sources
connected to the Component
port or select Autoto detect the
signal automatically
110