Epson Projector PowerLite Pro G6450WU User Manual

Follow
theseguidelines whenusinglensshifttoadjust yourimages:
 •
When adjusting theimage height, position theimage lowerthanwhere youwant itto be and then
 move
itup using thevertical lensshiftdial. This willhelp prevent theimage frommoving downafter
 adjustment.

•
Keeping thevertical andhorizontal lensshiftdials intheir center positions produces theclearest
 picture.

Parent
topic:UsingBasicProjector Features
 Displaying
aTest Pattern
 You
candisplay atest pattern toadjust theprojection imagewithout...

Adjustable
SettingsUsingaTest Pattern
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Setting
theScreen Type
 Adjustable
SettingsUsingaTest Pattern
 The
following imageadjustments canbemade whilethetest pattern isdisplayed.
 Top
menu
 Submenu/Option

Image
 Color
Mode
 Abs.
Color Temp.
 Advanced

•
Gamma 1
 •
RGB
 •
RGBCMY
 Reset

Signal
 Auto
Setup
 Settings
 Geometric
Correction
 Extended
 Multi-Projection

•
Brightness Level
 •
Edge Blending 2
 •
Multi-screen
 1
Except forcustom Gamma...

1.
Turn onthe projector anddisplay animage.
 2.
Toadjust theimage height, rotatethefront foottoextend orretract it.
 3.
Ifthe image istilted, rotate therear feettoadjust theirheight.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 93   

Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 Correcting
ImageShape withH/VKeystone
 Correcting
ImageShape withQuick Corner
 Correcting
ImageShape withArcCorner
 Correcting
ImageShape withCurved Surface
 Correcting
ImageShape withPoint Correction...

3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theH/V-Keystone settingandpress Enter.Then press Enter again.
 You
seetheH/V-Keystone adjustmentscreen:
 6.
Use thearrow buttons onthe projector orthe remote controltoselect between verticaland
 horizontal
keystonecorrection andtoadjust theimage shape asnecessary.
 7.
When youarefinished, pressEsc.
 After
correction, yourimage isslightly smaller.
 Parent
topic:Image Shape
 Related
references...

Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis
 unevenly
rectangular onallsides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theQuick Corner settingandpress...

6.
Use thearrow buttons onthe projector orthe remote controltoselect thecorner ofthe image you
 want
toadjust. Thenpress Enter.
 7.
Press thearrow buttons toadjust theimage shape asnecessary.
 8.
When youarefinished, pressEsc.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withArcCorner
 You
canusetheprojectors ArcCorner settingtoadjust thecurve orarc ofthe sides ofyour image
 (PowerLite...

3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theArc Correction settingandpress Enter.Then press Enter again.
 You
seetheArc Correction adjustment screen.
 98 

6.
Use thearrow buttons onthe projector orthe remote controltoselect thecorner orside ofthe image
 you
want toadjust. Thenpress Enter.
 7.
Press thearrow buttons toadjust theimage shape asnecessary.
 8.
When youarefinished, pressEsc.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Displaying
aTest Pattern
 Correcting
ImageShape withCurved Surface
 You
canusetheprojectors CurvedSurface settingtoadjust theshape ofan image projected ona
 curved...

3.
Select theSettings menuandpress Enter.
 4.
Select theGeometric Correction settingandpress Enter.
 5.
Select theCurved Surface settingandpress Enter.
 Note:
Ifyou seeaconfirmation messagetocontinue, pressEnter again.
 You
seethisscreen:
 6.
Select theCorrect Shapesettingandpress Enter.
 100