Epson Projector PowerLite Pro G6450WU User Manual

							

3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 51  
						

							

Using
theProjector onaNetwork
 Follow
theinstructions inthese sections toset upyour projector foruse onanetwork.
 Wired
Network Projection
 Wireless
NetworkProjection
 Registering
aDigital Certificate onthe Projector
 Setting
UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support
 Wired
Network Projection
 You
cansend images toyour projector throughawired network (PowerLite Pro
 G6050W/G6150/G6450WU/G6550WU/G6750WU).
Todothis, youconnect theprojector toyour
 network,
andthen setupyour projector andcomputer fornetwork projection.
 After
connecting andsetting upthe projector asdescribed here,install thenetwork software fromthe
 Epson
Projector SoftwareCD-ROM ordownload thesoftware asnecessary. Usethefollowing software
 and
documentation toset up, control, andmonitor network projection:
 •
EasyMP NetworkProjection softwaresetsupyour computer fornetwork projection. SeetheEasyMP
 Network
Projection OperationGuideforinstructions (PowerLitePro
 G6050W/G6150/G6450WU/G6550WU/G6750WU).

•
EasyMP Monitorsoftware (Windows only)letsyou monitor andcontrol yourprojector throughthe
 network.
Youcandownload thelatest software anddocumentation fromtheEpson website. Goto
 epson.com/support
(U.S.)orepson.ca/support (Canada)andselect yourprojector.
 •
EasyMP MultiPCProjection softwareallowsyoutohold interactive meetingsbyprojecting the
 computer
screensofusers overanetwork. SeetheEasyMP MultiPCProjection OperationGuidefor
 instructions
(PowerLiteProG6050W/G6150/G6450WU/G6550WU/G6750WU).
 •
EasyMP NetworkUpdatersoftware (Windows only)allows youtoupdate firmware foraprojector over
 a
wired LAN.SeetheEasyMP NetworkUpdaterOperation Guideforinstructions. Youcandownload
 the
latest software anddocumentation fromtheEpson website. Gotoepson.com/support (U.S.)or
 epson.ca/support
(Canada)andselect yourprojector.
 Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEasyMP Network
 Projection
software(PowerLite ProG6050W/G6150/G6450WU/G6550WU/G6750WU).
 52 
						

							

Connecting
toaWired Network
 Selecting
WiredNetwork Settings
 Parent
topic:UsingtheProjector onaNetwork
 Connecting
toaWired Network
 To
connect theprojector toawired localareanetwork (LAN),usea100Base-TX or10Base-T network
 cable.
Toensure properdatatransmission, useaCategory 5eshielded cableorbetter.
 1.
Connect oneendofthe network cabletoyour network hub,switch, orrouter.
 2.
Connect theother endofthe cable tothe projectors LANport.
 Parent
topic:WiredNetwork Projection
 Selecting
WiredNetwork Settings
 Before
youcanproject fromcomputers onyour network, youmust select thenetwork settingsforthe
 projector
usingitsmenu system.
 Note:
Makesureyoualready connected theprojector toyour wired network usingtheLAN port.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 53  
						

							

3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 54 
						

							

6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
Web Remote Password (PowerLite ProG6050W/G6150/G6450WU/G6550WU/G6750WU) or
Web
Control Password (PowerLite ProG6800/G6900WU) letsyou enter apassword upto8
 alphanumeric
characterslongforaccessing theprojector overtheweb. (Default username is
 EPSONWEB
;default password isadmin .)
 •
Projector Keyword(PowerLite ProG6050W/G6150/G6450WU/G6550WU/G6750WU) letsyou
 turn
onasecurity password toprevent accesstothe projector byanyone notinthe room withit.
 You
must enter adisplayed, randomized keywordfromacomputer usingtheEasyMP Network
 Projection
softwaretoaccess theprojector.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them.
 7.
Select theWired LANmenu andpress Enter.
 8.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 55 
						

							

•
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.
 9.
Toprevent displayofthe IPaddress onthe standby screen,turnoffIPAddress Display.
 10.
When youfinish selecting settings,selectSetup complete andfollow theon-screen instructions to
 save
yoursettings andexitthemenus.
 Parent
topic:WiredNetwork Projection
 Wireless
NetworkProjection
 You
cansend images toyour projector throughawireless network(PowerLite Pro
 G6050W/G6150/G6450WU/G6500WU/G6750WU).
Todothis, youmust install theoptional Epson
 802.11b/g/n
wirelessLANmodule, andthen setupyour projector andcomputer forwireless projection.
 Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEasyMP Network
 Projection
softwarewithouttheneed forthe optional wireless module.
 After
installing themodule andsetting upthe projector, installthenetwork software fromtheEpson
 Projector
SoftwareCDordownload thesoftware, asnecessary. Usethefollowing softwareand
 documentation
toset up, control, andmonitor wireless projection:
 •
EasyMP NetworkProjection softwaresetsupyour computer forwireless networkprojection. Seethe
 EasyMP
NetworkProjection OperationGuideforinstructions.
 •
EasyMP Monitorsoftware (Windows only)letsyou monitor andcontrol yourprojector throughthe
 network.
Youcandownload thelatest software anddocumentation fromtheEpson website. Goto
 epson.com/support
(U.S.)orepson.ca/support (Canada)andselect yourprojector.
 •
EasyMP MultiPCProjection softwareallowsyoutohold interactive meetingsbyprojecting the
 computer
screensofusers overanetwork. SeetheEasyMP MultiPCProjection OperationGuidefor
 instructions.

Installing
theWireless LANModule
 Using
QuickWireless Connection (WindowsOnly)
 Selecting
WirelessNetworkSettingsManually
 Selecting
WirelessNetworkSettingsinWindows
 Selecting
WirelessNetworkSettingsinMac OSX
 56 
						

							

Enabling
WPAorEAP Security
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Optional
Equipment andReplacement Parts
 Installing
theWireless LANModule
 To
use theprojector overawireless network, installtheEpson 802.11b/g/n wirelessLANmodule
 (PowerLite
ProG6050W/G6150/G6450WU/G6550WU/G6750WU). Donot install anyother typeof
 wireless
LANmodule.
 Caution:
Neverremove themodule whileitsindicator lightisgreen orflashing, orwhile youare
 projecting
wirelessly. Youmay damage themodule orlose data.
 1.
Turn offthe projector andunplug thepower cord.
 2.
Slide theairfilter cover latchandopen theairfilter cover.
 57  
						

							

3.
Remove thescrew securing thewireless LANmodule stopper, thenremove thestopper.
 4.
Insert thewireless LANmodule intotheport.
 58   
						

							

5.
Replace thewireless LANmodule stopper andsecure itusing thescrew youremoved.
 6.
Close theairfilter cover.
 7.
Plug inand turn onthe projector.
 Parent
topic:Wireless NetworkProjection
 Related
references
 Optional
Equipment andReplacement Parts
 Using
Quick Wireless Connection (WindowsOnly)
 You
canusetheQuick Wireless Connection USBkeytoquickly connect yourcomputer tothe projector
 wirelessly
(PowerLite ProG6050W/G6150/G6450WU/G6550WU/G6750WU). Thenyoucanproject your
 presentation
andremove thekey when youaredone.
 Note:
Makesurethewireless LANmodule isinstalled.
 1.
Turn onthe projector.
 2.
Press theLAN button onthe remote control.
 You
seeascreen likethis:
 59  
						

							

3.
Verify thatanSSID andIPaddress aredisplayed, thenremove thewireless LANmodule fromthe
 projector.

4.
Insert theQuick Wireless Connection USBkeyinto thesame portused forthe wireless LANmodule.
 You
seeaprojected messagethatthenetwork information updateiscomplete.
 5.
Remove theUSB key.
 6.
Reinsert thewireless LANmodule intotheprojector.
 7.
Now connect theUSB keytoaUSB portonyour computer ornotebook.
 Note:
InWindows Vista,ifyou seetheAutoPlay window,selectRunLaunchQWRD.exe ,then
 select
Allow onthe next screen.
 60