Home > Epson > Projector > Epson Projector PowerLite Pro G6550WU User Manual

Epson Projector PowerLite Pro G6550WU User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector PowerLite Pro G6550WU User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    
    Note:
    Enabling CrestronRoomView disablestheEpson Message Broadcast featureinthe EasyMP
     Monitor
    software.
     6.
    When youfinish selecting settings,selectComplete orSetup Complete andfollow theon-screen
     instructions
    tosave yoursettings andexitthemenus.
     7.
    Turn offthe projector, thenturniton again toenable thesetting.
     Parent
    topic:Crestron RoomView Support
     Controlling
    aNetworked ProjectorUsingCrestron RoomView
     Once
    youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
     using
    acompatible webbrowser.
     1.
    Start yourwebbrowser onacomputer connected tothe network.
     2.
    Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
     You
    seethisscreen:
     3.
    Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
     available
    sourcesusingtheupand down arrows inthe box.
     81  
    						
    							
    
    4.
    Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
     control
    buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
     Note:
    These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
     •
    OK acts asthe Enter button
     •
    Menu displays theprojectors menu
     5.
    Toview information abouttheprojector, clicktheInfo tab.
     6.
    Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
     displayed
    screen,andclick Send .
     7.
    When youfinish selecting settings,clickExittoexit theprogram.
     Parent
    topic:Crestron RoomView Support
     82 
    						
    							
    
    Using
    BasicProjector Features
     Follow
    theinstructions inthese sections touse your projectors basicfeatures.
     Turning
    Onthe Projector
     Turning
    Offthe Projector
     Selecting
    theLanguage forthe Projector Menus
     Setting
    theScreen Type
     Adjusting
    theImage Position UsingScreen Position
     Adjusting
    theImage Position UsingLensShift
     Displaying
    aTest Pattern
     Adjusting
    theImage Height
     Image
    Shape
     Resizing
    theImage WiththeZoom Ring
     Focusing
    theImage UsingtheFocus Ring
     Remote
    ControlOperation
     Selecting
    anImage Source
     Projection
    Modes
     Image
    Aspect Ratio
     Color
    Mode
     Controlling
    theVolume withtheVolume Buttons
     Setting
    theDate andTime
     Turning
    Onthe Projector
     Turn
    onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
     display
    theimage source.
     Note:
    Ifthe Startup SourceSearchsettinginthe Extended menuisenabled, theprojector
     automatically
    detectstheinput signal whenyouturn iton.
     83 
    						
    							
    
    1.
    Connect thepower cordtothe projectors powerinlet.
     2.
    Plug thepower cordintoanelectrical outlet.
     The
    projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
     not
    yetturned on(itisin standby mode).
     Note:
    WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
     3.
    Press thepower button onthe projector orthe remote controltoturn onthe projector.
     The
    projector beepsandthepower lightflashes greenasthe projector warmsup.After about 30
     seconds,
    thepower lightstops flashing andturns green.
     Warning:
    Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
     especially
    dangerous forchildren andpets.
     If
    you donot see aprojected imagerightaway, trythe following:
     •
    Turn onthe connected computerorvideo device.
     •
    Insert aDVD orother video media, andpress theplay button (ifnecessary).
     •
    Press theSource Searchbuttononthe projector orthe Search buttononthe remote controltodetect
     the
    video source.
     84  
    						
    							
    
    Parent
    topic:UsingBasicProjector Features
     Related
    references
     Projector
    SetupSettings -Extended Menu
     Turning
    Offthe Projector
     Before
    turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
     display
    duringshutdown.
     Note:
    Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
     depending
    uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
     1.
    Press thepower button onthe projector orthe Standby buttononthe remote control.
     2.
    Ifyou seeashutdown confirmation screen,pressthepower button onthe projector orthe Standby
     button
    onthe remote controlagain.(Toleave theprojector on,press anyother button.)
     The
    projector beepstwice,thelamp turns off,and thepower lightturns orange.
     Note:
    WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
     projector
    fortransport rightaway (ifnecessary).
     3.
    Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
     unplug
    thepower cord.
     Caution:
    Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
     light
    isgreen orflashing orange.
     Parent
    topic:UsingBasicProjector Features
     85 
    						
    							
    
    Selecting
    theLanguage forthe Projector Menus
     If
    you want toview theprojectors menusandmessages inanother language, youcanchange the
     Language
    setting.
     1.
    Turn onthe projector.
     2.
    Press theMenu button.
     3.
    Select theExtended menuandpress Enter.
     4.
    Select theLanguage settingandpress Enter.
     5.
    Select thelanguage youwant touse and press Enter.
     6.
    Press Menu orEsc toexit themenus.
     Parent
    topic:UsingBasicProjector Features
     Setting
    theScreen Type
     You
    canusetheScreen Typesetting tomatch theaspect ratioofthe displayed imagetothe screen
     being
    used.
     1.
    Turn onthe projector anddisplay animage.
     2.
    Press theMenu button.
     3.
    Select theExtended menuandpress Enter.
     86 
    						
    							
    
    4.
    Select Display >Screen >Screen Type.
     You
    seethisscreen:
     5.
    Select yourscreens aspectratioandpress Enter.
     6.
    Press theMenu button toaccept thechanges.
     Note:
    Afterchanging theScreen Typesetting, adjusttheaspect ratioforthe projected image.
     Parent
    topic:UsingBasicProjector Features
     Related
    concepts
     Image
    Aspect Ratio
     Adjusting
    theImage Position UsingScreen Position
     You
    canadjust theimage position ifthere aremargins between theedge ofthe image andtheprojected
     screen
    frame.
     1.
    Turn onthe projector anddisplay animage.
     2.
    Press theMenu button.
     3.
    Select theExtended menuandpress Enter.
     4.
    Select Display >Screen >Screen Position .
     87 
    						
    							
    
    5.
    Use thearrow buttons onthe remote controlorprojector toadjust theposition ofthe image.
     6.
    When youarefinished, presstheMenu button.
     Note:
    Thescreen position cannotbeadjusted ifthe Screen Typeisset to16:10 forthe PowerLite Pro
     G6050W,
    G6450WU, G6550WU,orG6900WU modelsor4:3 forthe PowerLite ProG6150 andG6800
     models.
    
    Parent
    topic:UsingBasicProjector Features
     Adjusting
    theImage Position UsingLensShift
     If
    the projector cannotbeinstalled directlyinfront ofthe screen, youcanadjust theposition ofthe
     projected
    imageusingthelens shiftfeature.
     Note:
    Wait30minutes afterturning onthe projector beforesetting thefocus, zoom, andlens shiftfor
     maximum
    accuracy.
     1.
    Turn onthe projector anddisplay animage.
     88  
    						
    							
    
    2.
    Slide thelens shiftdiallock asshown torelease thelock.
     3.
    Turn thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
     image
    asnecessary.
     The
    range inwhich theimage canbemoved isshown asfollows:
     89   
    						
    							
    
    1
     Center
    oflens
     2
     Projected
    imagewhenlensshiftisset inthe center
     3
     V
    ×67% (PowerLite ProG6050W/G6450WU/G6550WU/G6750WU/G6900WU); V× 57%
     (PowerLite
    ProG6150/G6800)
     4
     H
    ×30%
     Note:
    Theimage cannot bemoved toboth thehorizontal andvertical maximum values.
     4.
    When youarefinished, slidethelens shiftdiallock asshown tolock thedials.
     90   
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector PowerLite Pro G6550WU User Manual