Epson Projector Z8150NL User Manual

							Functions for Enhancing Projection
41
B
Move the Pointer icon ( ).
q
You can choose from three different kinds of Pointer icon ( ,  , or  ) 
in Settings - Pointer Shape from the configuration menu.
sp.65
Enlarging Part of the Image (E-Zoom)
This is useful when you want to expand images to see them in greater 
detail, such as graphs and tables.Procedure
A
Start E-Zoom.
B
Move the ( ) to the area of the image that you want to 
enlarge.
Remote Control
Remote Control
Remote Control 
						

							Functions for Enhancing Projection
42
C
Enlarge.
Each time the button is pressed, the area is expanded. You can ex-
pand quickly by holding the button down.
You can reduce the enlarged image by pressing the [x] button.
Press the [Esc] button to cancel.
q
•The enlargement ratio appears on the screen. The selected area can be 
enlarged between 1 to 4 times in 25 incremental steps.
•Use the [h] button to scroll through the enlarged image.
•E-Zoom is canceled when performing some functions such as keystone or 
Auto Setup.
•When Scale is set to On, E-Zoom cannot be used.Remote Control 
						

							Saving a User's Logo
43
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
The saved user's logo can be used as the display image when there is no 
video signal input or during starting up.
q
Once a User's Logo has been saved, the logo cannot be returned to the 
factory default.
ProcedureA
Project the image you want to use as the User's Logo, and 
then press the [Menu] button.
B
Select Extended - "User's Logo" from the configuration 
menu. s"Using the Configuration Menu" p.55
q
•If User's Logo Protect from Password Protect is set to On, a message is 
displayed and the user's logo cannot be changed. You can make changes 
after setting User's Logo Protect to Off. sp.45
•If User's Logo is selected when keystone, E-Zoom, or Aspect are being 
performed, the function currently being performed is cancelled.
C
When "Choose this image as the User's Logo?" is displayed, 
select "Yes".
q
When you press the [Enter] button on the remote control or the control 
panel, the screen size may change according to the signal as it changes to 
the resolution of the image signal.
Using the Remote Control Using the Control Panel 
						

							Saving a User's Logo
44
D
Move the box to select the part of the image to use as the 
User's Logo.
q
Your User’s Logo image can have a resolution up to 400^ 300.
E
When "Select this image?" is displayed, select "Yes".
F
Select the zoom factor from the zoom setting screen.
400% is displayed only when using PowerLite Pro 
Z8450WUNL/Z8455WUNL.
G
When the message "Save this image as the User's Logo?" is 
displayed, select "Yes".
The image is saved. After the image has been saved, the message 
"Completed." is displayed.
q
•To use the saved user's logo as the screen image, set it in the Display 
settings under the Extended menu. sp.67
•Saving the user's logo may take approximately 15 seconds. Do not use the 
projector or any connected equipment while it is saving, otherwise 
malfunctions may occur. Using the Remote Control Using the Control Panel 
						

							Security Functions
45
Security Functions
The projector has the following enhanced security functions.
•Password Protect
You can limit who can use the projector.
•Control Panel Lock/Lens Operation Lock/Remote control button lock
You can prevent people changing the settings on the projector without 
permission. sp.47
•Theft-Deterrent Lock
The projector is equipped with various types of theft-deterrent security 
devices. sp.50
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the 
password cannot use the projector to project images even if the projector 
power is on. Furthermore, the user's logo that is displayed when you turn 
on the projector cannot be changed. This acts as a theft-deterrent since 
the projector cannot be used even if it is stolen. At the time of purchase, 
Password Protect is not activated.
Type of Password Protect
The following three kinds of Password Protect settings can be made 
according to how the projector is being used.
Setting Password Protect
Use the following procedure to set Password Protect.
ProcedureA
During projection, hold down the [Freeze] button for about 
five seconds.
The Password Protect setting menu is displayed.
1. Power On Protect
When Power On Protect is On, you need to enter a preset password 
after the projector is plugged in and turned on (this also applies to 
Direct Power On). If the correct password is not entered, projection does 
not start.2. User's Logo Protect
Even if someone tries to change the User's Logo set by the owner of the 
projector, it cannot be changed. When User's Logo Protect is set to On, 
the following setting changes for the User's Logo are prohibited.
•Capturing a User's Logo
•Settings for Display Background, and Startup Screen from Display 
in the configuration menu
3. Network Protect
When Network Protect is set to On, setting changes for Network menu 
in the configuration menu are prohibited.
Remote Control 
						

							Security Functions
46
q
•If Password Protect is already activated, you must enter the password.
If the password is entered correctly, the Password Protect setting menu is 
displayed. s"Entering the Password" p.46
•When the password is set, stick the Password protect sticker in a visible 
position on the projector as a further theft-deterrent.
B
Turn on "Power On Protect".
C
Turn on "User's Logo Protect".
D
Turn on "Network Protect".
E
Set the Password.
Entering the Password
When the Password entry screen is displayed, enter the password using 
the numeric buttons on the remote control.
Procedure
While holding down the [Num] button, enter the password by 
pressing the numeric buttons.
When you enter the correct password, projection begins.
(1) Select Power On Protect, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(1) Select User's Logo Protect, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(1) Select Network Protect, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(1) Select Password, and then press the [Enter] button.
(2) The message "Change the password?" is displayed, select Yes 
and then press the [Enter] button. The default setting for the 
Password is "0000". Change this to your own desired password. If 
you select No, the screen shown in step 1 is displayed again.(3) While holding down the [Num] button, enter a four digit number 
using the numeric buttons. The number entered is displayed as "* 
* * *". When you enter the fourth digit, the confirmation screen is 
displayed.
Remote Control
(4) Re-enter the password.
The message "Password accepted." is displayed.
If you enter the password incorrectly, a message is displayed 
prompting you to re-enter the password. 
						

							Security Functions
47
Caution
•If an incorrect password is entered three times in succession, the message "The 
projector's operation will be locked." is displayed for about five minutes, and then 
the projector switches to standby mode. If this happens, disconnect the power plug 
from the electrical outlet and then reinsert it and turn the projector's power back on. 
The projector displays the Password entry screen again so that you can enter the 
correct password.
•If you have forgotten the password, make a note of the "Request Code: xxxxx" 
number that appears on the screen and contact Epson. sp.114
•If you continue to repeat the above operation and input the wrong Password thirty 
times in succession, the following message is displayed and the projector does not 
accept any more Password entries. "The projector's operation will be locked. 
Contact Epson." sp.114Restricting Button Operation
The following three kinds of operation restriction functions are available 
with the projector.
•Control Panel Lock
This is useful at events or shows when you want to deactivate all 
buttons during projection or at schools when you want to limit button 
operation.
•Lens Operation Lock
This function deactivates all buttons on the remote control related to 
the lens operation to prevent improper lens adjustment after it is 
properly adjusted.
•Remote control button lock
This function deactivates all buttons on the remote control except for 
the buttons needed for basic remote control operation.
Control Panel Lock
Perform one of the following to lock the operation buttons on the control 
panel. Even if the control panel is locked, you can still use the remote 
control as usual.
•Full Lock
All of the buttons on the control panel are locked. You cannot perform 
any operations from the control panel, including turning the power on 
or off.
•Partial Lock
All of the buttons on the Control panel, except for the [t] button, are 
locked.
ProcedureA
During projection, press the [Menu] button and select 
Settings - "Control Panel Lock" from the configuration 
menu. s"Using the Configuration Menu" p.55
Using the Remote Control Using the Control Panel 
						

							Security Functions
48
B
Select either "Full Lock" or "Partial Lock" according to your 
purpose.
C
Select "Yes" when the confirmation message is displayed.
The control panel buttons are locked according to the setting you 
chose.
q
You can release the control panel lock by one of the following two methods.
•From the remote control, select Off in Settings - Control Panel Lock from 
the configuration menu. sp.65
•Press and hold down the [Enter] button on the control panel for about 
seven seconds, a message is displayed and the lock is released.
Lens Operation Lock
This function locks the following buttons on the remote control related 
to the lens operation.
ProcedureA
Press the [Menu] button, and select Settings - "Lens 
Operation Lock" from the configuration menu. s"Using 
the Configuration Menu" p.55
Remote Control
Using the Remote Control Using the Control Panel 
						

							Security Functions
49
B
Select "On".
The buttons related to the lens operation are locked according to 
the setting you chose.
Remote control button lock
This function locks the following buttons on the remote control.Procedure
Each time the [Help] button is pressed for at least 5 seconds, the remote 
control button lock turns on or off.
Remote Control
Remote Control 
						

							Security Functions
50
q
Even if the remote control button lock is on, the following operations are 
possible.
•Resetting the Remote Receiver setting to it’s default
•Entering numbers using the [Num] button and the numeric buttons
Theft-Deterrent Lock
As the projector is often setup on ceiling mounts and left in rooms 
unattended, the projector includes the following security devices to 
prevent someone from taking the projector.
•Security slot
The Security slot is compatible with the Microsaver Security System 
manufactured by Kensington.
•Handle
A commercially available theft-deterrent wire lock can be passed 
through the security cable installation point to secure the projector to a 
desk or pillar.
Installing the wire lock
Pass an theft-deterrent wire lock through the handle.See the documentation supplied with the wire lock for locking 
instructions.