Farberware 10 Cup Coffee Maker FSCM100 User Manual

USE & CARE INSTRUCTIONS
10 CUP PROGRAMMABLE COFFEEMAKER
FSCM100
SPECIAL SELECT  

1
IMPOR TANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs. 
3. To protect against fire, electric shock, and injury to persons,
do not immerse cord, plug, or Coffee Maker in water or 
other liquid.
4. Close supervision is necessary when any appliance is used by or
near children.
5....

2
WARNING: This appliance generates heat and escaping steam
during use. Use proper precautions to prevent the risk of
burns, fires, or other injury to persons or damage to property.
1. Do not pour liquid other than water and the cleaning solution
specified in this manual into the Water Reservoir.
2. Coffeemaker must be left to cool down for approximately 
15 minutes before adding more water.
3. DO NOT attempt to move an appliance containing hot liquids.
Allow appliance to cool completely before moving....

3
POLARIZED PLUG
This appliance has a polarized plug(one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
SHORT CORD INSTRUCTIONS
A short power-supply cord is provided to reduce the risk resulting
from becoming entangled in or tripping over a longer...

GETTING TO KNOW YOUR FARBERWARE®
10 CUP COFFEEMAKER
1. Water Reservoir Lid  (P/N 30654)
2. Swing-Out Filter Basket  (P/N 30651)
3. Water Reservoir
4. Carafe Lid  (P/N 30652)
5. Control Panel
6. Polarized Plug
7. Warming Plate
8. Carafe w/Lid  (P/N 30653)
9. Drip Stop Assembly  (P/N 30781)
10. Water Level Indicator
11. Removable Filter Basket Assembly
(P/N 30650)
1.
2.
9.4.
8.10. 11.
(inside)
7. 6. 5. 3.
4  

5
AUTO  OFF  ON
ON HOUR
MIN.
BREW
CONTROL PANEL
REMOVABLE FILTER BASKET
AM/PM
AUTO ONON/
BREWING
AUTO/OFF/ON
Switch
GETTING TO KNOW YOUR COFFEEMAKER (Cont.)
To remove the Removable Filter Basket for cleaning, pull Basket
straight up and out of the machine. After cleaning, the Removable
Filter Basket must be  pushed all the way into the Swing-Out Filter
Basket. Before use, make sure the Swing-Out Filter Basket fits
securely back into the unit. 
Removable
Filter Basket
Drip Stop
Assembly
Swing-Out
Filter...

6
INSTRUCTIONS FOR USE
BEFORE BREWING COFFEE FOR THE FIRST TIME
CAUTION: To protect against electric shock, do not submerge the
Coffeemaker or allow AC cord to come into contact with
water or other liquids.
1. After carefully unpacking from carton, the inside of your
Coffeemaker and Carafe must be cleaned.
2. Brew 10 cups of fresh water only. Follow the instructions 
under BREWING COFFEE Section but  do not add coffee
grounds to the paper filter.
3. When all the water has brewed into the Carafe, slide...

7
DRIP STOP FEATURE
This FARBERWARE®Coffeemaker has an Automatic Drip Stop
Feature. During the brewing cycle, the Carafe can be removed 
to pour a cup of coffee from the Carafe. The Drip Stop Feature will
prevent the Coffeemaker from continuing to brew coffee for up to
one minute until the Carafe is returned to its proper position.
IMPORTANT: The Carafe must be replaced on the Warming Plate,
under the Filter Basket in less than a minute to prevent the
Filter Basket from overflowing.
AUTOMATIC START-UP...

8
BREWING COFFEE IN YOUR
FARBERWARE®10 CUP 
PROGRAMMABLE COFFEEMAKER
CAUTION: Use this product with proper AC voltage rating only.
Be sure to unplug the power cord when Coffeemaker is not in
use for extended periods of time.
1. Lift the Carafe Lid. Fill the Carafe with
cold water to the level for the desired
number of cups (1-10). Open the Water
Reservoir Lid, and pour the water from
the Carafe into the Water Reservoir.
Close the Water Reservoir Lid.
2. Swing out the Coffee Filter Basket 
and place a #4...

9
SETTING THE CLOCK / TIMER
1. Set the Timer to the correct time of
the day by pushing the HOURButton
until the correct hour appears on the
LCD Display. Then push the MIN.
Button to the current minutes. Be sure
to note a.m. and p.m. times. 
NOTE: The LED in the upper-left corner
of the Display indicates the P.M.
hours. (See Figure 3.)
2. To program the Coffeemaker for
Automatic Start-Up, push and HOLD
the BREWButton. While holding the
BREWButton, push the HOURButton
to the desired start-up time hour....