Faroudja Fdp-Dila3 Instructions

INSTRUCTIONSFDP-DILA3
DIGITAL CINEMA SOURCE PACKAGE
 
®
  THEATER OPTIMIZED PROJECTOR
FDP-DILA3
Serial No. Model No.
 
NOTICE: THIS PROJECTOR HAS BEEN SIGNIFICANTLY MODIFIED AND OPTIMIZED TO PRODUCE VERY HIGH
QUALITY IMAGES USING THE FAROUDJA PROCESSOR.
ANY CHANGES MADE TO THESE SETTINGS CAN CORRUPT THIS PROCESS. RESETTING THE OPTIMIZATION IS NOT COVERED UNDER WARRANTY. 

2
SAFETY PRECAUTIONS
About burning-in of the D-ILA device
Do not allow the same still picture to be projected for a long
time or an abnormally bright video picture to be projected.
Do not project video images with high-intensity or high contrast
on a screen. The video image could be burnt into the D-ILA
device.
Use special care when projecting video games or computer pro-
gram images. There is no problem with ordinary video-cassette
playback images.
About the installation place
Do not install the...

3
•Slots and openings in the cabinet are provided for ventila-
tion. These ensure reliable operation of the product and pro-
tect it from overheating. These openings must not be blocked
or covered. (The openings should never be blocked by plac-
ing the product on bed, sofa,rug, or similar surface. It should
not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided and the manufac-
turer’s instructions have been adhered to.)
For proper ventilation, separate...

4
Safety Precaution
The wire which is coloured green-and-yellow must be connected
to the terminal which is marked with the letter E or the safety
earth or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the ter-
minal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
When replacing the fuse, be sure to use only a correctly rated
approved type,...

5
Caution
About burning-in of the D-ILA device
●Do not allow the same still picture to be projected for a long
time or an abnormally bright video picture to be projected.
Do not project video images with high-intensity or high con-
trast on a screen. The video image could be burnt into the
D-ILA device.
Use special care when projecting video games or computer
program images.
There is no problem with ordinary video cassette playback
images.
Viewing conditions
●Brightness of the room
Please avoid having...

6
Conte nts
S A FE TY  P R EC AUTIO NS............................................2
C au tio n........................................................................5
A ccesso rie s................................................................6
C ontro ls  a n d  F eatu re s...............................................7
F ront S id e / To p  S urfa ce / L eft S id e.......................................7
C onnecto r P anel ....................................................................8
C ontr...

7
Controls and Features
Front Side/Top Surface/Left Side
6. Air inlets (on the front, right,  and bottom side of
projector)
The air inlets absorb air to cool the internal components of
the projector. Do not block or allow warm air to blow into
them as it may cause damage.
* The air inlet filter on the right side cannot be removed.
Please clean the filter regularly with eg, a vacuum cleaner.
7. Remote Sensor (Front)
When operating with the remote control, aim it towards this
sensor. ( ☞ page 18)
*A...

Controls and Features
Connector Panel
2PC1 Input Terminal
4DC OUT
Terminal6REMOTE
Te rminal
5A UDIO Input Terminal7CONTROL RS232C
IN/OUT Terminal9VIDEO Input
Te rminal
1PC2 Input Terminal3PC3 Input Terminal
8Y/C Input
Te rminal
RPR/CRGYBPB/CSVDVIH/CS
PC1PC3PC2
A UDIO INREMOTEDC OUT
5V  }1.5A RS-232C OUT RS-232C IN Y/C VIDEOCONTROLVIDEO IN
1PC 2 Input terminal [BNC x 5]
These are multipurpose video input terminals that allow in-
put of the following signals: analog RGB signals, vertical
sync (V) signals,...

8TEMP indicator1STAND BY indicator
2OPERATE indicator
3OPERATE button
4VOLUME button
5EXIT button
6ENTER button
7HIDE button
pVIDEO button
qPC button
wH-KEYSTONE button
eV-KEYSTONE button
rMENU button
tCURSOR button
(
 /  /  / )
9LAMP indicator
yPRESET button
V-KEYSTONE PC
LAMP
H-KEYSTONE VOL.
VIDEO
TEMP STAND BYOPERATE
PRESET
MENUEXIT
ENTER
HIDE
Control Panel on the Projector                                 Remove cover to access
Controls and Features
Indicator Display on the Control Panel...

Control Panel on the Projector
Controls and Features
1STAND BY Indicator
Light on : on stand by mode.
Blinking : on cool down mode.
2OPERATE Indicator
Light on : During projection.
3OPERATE button
When this projector is in the standby mode, pressing this
button for more than 1 second will turn on the projector and
cause the OPERATE indicator to light up. Press it one sec-
ond or more again, and the projector goes into the cool
down mode and finally the stand by mode.  ( ☞  page 24)
* The OPERATE button...